Checkpoint 15000 Manuale utente
Classification [Protected] P/N:707591
© 2018 Check Point Software Technologies Ltd. All rights reserved.
For a list of our trademarks, please refer to: www.checkpoint.com/copyright.html.
For a list of our Third Party Copyright notices, please refer to: www.checkpoint.com/3rd_party_copyright.html
15000 and 23000 Appliances
Installing and Removing Memory
707591
Protected
2018
This document applies to these appliances:
•15000 Appliances
•23000 Appliances
Important - We recommend that only experienced personnel install or
remove hardware components. Installing or removing components
incorrectly can permanently damage the appliance.
Preparing the Appliance
Before you start to install or remove DIMMs, make sure that:
•The appliance is shut down and you unplug the power cables.
•The appliance is in a clean environment and on a level surface.
•You can physically access and open the cover of the appliance.
•You have the Check Point memory kit.
Important
To protect the appliance and the memory modules from electrostatic
discharge damage, make sure that you are properly grounded before you
touch these components. For more, see the Health and Safety Information
in the
15000 and 23000 Appliances Getting Started Guide
http://supportcontent.checkpoint.com/documentation_download?ID=45733.
We recommend that you use the grounding wrist strap that is included in
the memory kit. The grounding plug on the rear of the appliance provides a
chassis grounding point.
2
Memory Kit Contents
•Installation guide - 15000 and 23000 Appliances Installing and Removing
Memory
•Memory DIMMs
•ESD grounding strap (anti-static)
To prepare the appliance:
1. Shut down the appliance from the WebUI, CLI, or by pressing and releasing
the power switch quickly.
Note that pressing and holding the power switch is not recommended as it
results in a forced and immediate shut down.
2. Remove the power cords from the appliance.
3. Put on the ESD strap and attach the other end to a grounding point.
4. Loosen the appliance cover screws.
5. Remove the top cover from the appliance.
3
To remove the top cover:
1. Unscrew the cover screws (number 2 below).
2. Pull the top cover back in the direction of the arrows.
3. Pull the cover up to remove it completely.
Item Description
1 Appliance cover
2 Appliance cover screws
3 ESD grounding point
4
15400 Appliance DIMM Configuration
Item Description
1 Appliance front panel
2 Appliance rear panel
3 Sockets for DIMMs
5
The memory sockets are colored black and blue. In the appliance configuration
diagrams note that:
•The view shown is always from the top
•The front panel of the appliance is always at the bottom of the diagram
Item Description
Memory socket with DIMM installed
Memory socket without DIMM installed
6
The 15400 appliance has a default memory configuration of 8 GB: 1 x 8 GB, with
one DIMM in memory socket number 3.
You can upgrade to 24 GB or 64 GB. Use the applicable upgrade procedure
below.
Default Configuration
Top View
(front panel of the 15400 appliance is at the bottom of the diagram)
To upgrade
to
Use
DIMMs
Procedure Slots
24 GB 3 x 8 GB Install additional DIMMs for a total
of three 8 GB DIMMs
In blue memory
socket numbers
1, 3, and 6
Upgraded Configuration
Top View
(front panel of the 15400 appliance is at the bottom of the diagram)
7
To upgrade
to
Use
DIMMs
Procedure Slots
64 GB 8 x 8 GB Install additional DIMMs for a total
of eight 8 GB DIMMs
In all sockets
(numbers 1
through 8)
Upgraded Configuration
Top View
(front panel of the 15400 appliance is at the bottom of the diagram)
8
15600, 23500, 23800, and 23900 DIMM
Configuration
Item Description
1 Appliance front panel
2 Appliance rear panel
3 CPU1 DIMM sockets
4 CPU0 DIMM sockets
9
The memory sockets are colored black and blue. In the appliance configuration
diagrams note that:
•The view shown is always from the top
•The front panel of the appliance is always at the bottom of the diagram
Item Description
Memory socket with DIMM installed
Memory socket without DIMM installed
10
15600 Appliance DIMM Configuration
The 15600 appliance has a default memory configuration of 16 GB: 2 x 8 GB,
with two DIMMs in memory socket numbers 3 and 9.
You can upgrade to 32 GB or 64 GB. Use the applicable upgrade procedure
below.
Default Configuration
Top View
(front panel of the 15600 appliance is at the bottom of the diagram)
To
upgrade
to
Use
DIMMs
Procedure Slots
32 GB 4 x 8 GB Install additional DIMMs for a total
of four 8 GB DIMMs
In blue memory
socket numbers 3,
6, 9 and 11
Upgraded Configuration
Top View
(front panel of the 15600 appliance is at the bottom of the diagram)
Altri manuali per 15000
2
Questo manuale è adatto per i seguenti modelli
6
Indice
Altri manuali Checkpoint Firewall
Checkpoint
Checkpoint IP690 - Flash Based Sys Manuale utente
Checkpoint
Checkpoint MAESTRO R80.20SP Manuale di istruzioni
Checkpoint
Checkpoint 2200 Manuale utente
Checkpoint
Checkpoint Power Sensor 2000 Manuale utente
Checkpoint
Checkpoint Quantum LightSpeed Appliance QLS250 Manuale di istruzioni per l'installazione
Checkpoint
Checkpoint UTM-1 Edge W16 Manuale utente
Checkpoint
Checkpoint TE1000X Manuale utente
Checkpoint
Checkpoint Smart-1 series Manuale utente
Checkpoint
Checkpoint 2200 Manuale di istruzioni
Checkpoint
Checkpoint UTM-1 1050 Manuale utente
Checkpoint
Checkpoint Quantum LightSpeed Appliance QLS250 Manuale di istruzioni
Checkpoint
Checkpoint SMB 1500 Series Manuale utente
Checkpoint
Checkpoint 600 Manuale utente
Checkpoint
Checkpoint 1100 Manuale utente
Checkpoint
Checkpoint 4000 Series Manuale utente
Checkpoint
Checkpoint QUANTUM LIGHTSPEED Manuale utente
Checkpoint
Checkpoint M2 Manuale utente
Checkpoint
Checkpoint 4000 Series Manuale utente
Checkpoint
Checkpoint 500W Manuale utente
Checkpoint
Checkpoint 4200 Manuale utente
