4-13 Work mode.
1. Long press “ ” key for 3 seconds to display “add caller ”
2. Press “ ” key to select “work mode ”
3. Press “ ” to confirm, screen displays “single key”and “multi-key”
4. Select the one you want and Press “ ” to confirm.
5. When done, press “ ” to exit the programming mode.
5-13 Display Mode
1. Long press “ ” key for 3 seconds to display “add caller ”
2. Press “ ” key to select “display mode ”
3. Press “ ” to confirm, screen displays “live view”“queue view”
4. Select the one you want then press “ ” to confirm. “live view”means, when
No.1 No.2 No.3 are called in turn, screen displays 0003 0002 0001. Latest call
number displays on the top of screen. “queue view”means, when No.1 No.2 No.3
are called in turn, screen displays 0001 0002 0003. Earliest call number displays
on the top of the screen.
5. When done, press “ ” to exit the programming mode.
6-13 Prompt mode
1. Long press “ ” key for 3 seconds to display “add caller”
2. Press “ ” key to select “prompt mode ”
3. Press “ ” to confirm, screen displays “light” ” vibration” ” sound”
4. Select the prompt mode you want and Press “ ” to confirm
6. When done, press “ ” to exit the programming mode.
7-13 Prompt timing
1. Long press “ ” key for 3 seconds to display “add caller”
2. Press “ ” key to select “prompt timing”. You can choose from 01-99 seconds.
00 means prompt all the time without stopping until the watch is turned off
3. Choose the time you want, and press “ ” to confirm.
4. When done, press “ ” to exit the programming mode.
8-13 Remove timing
1. Long press “ ” key for 3 seconds to display “add caller”
2. Press “ ” key to select “remove timing”
3. Press “ ” to confirm. You can choose from 00-99. 00 means cycle mode, all number
will display on the screen until canceled. For 01-99 it means, the time delay until the
number disappear automatically.
4. Choose the number you want. Press “Press “ ” key to confirm
5. When done, press “ ” to exit the programming mode.
9-13 Cycle timing
1. Long press “ ” key for 3 seconds to display “add caller”
2. Press “ ” key to select “cycle timing”
3. Press “ ” to confirm, You can choose from 00-99. For example, if you choose 10
seconds. It means for each 10 seconds, the numbers will cycle one time.
4. Choose the number you want. Press “Press “ ” key to confirm
5. When done, press “ ” to exit the programming mode.
10-13 Date &Time
1. Long press “ ” key for 3seconds to display “add caller”
2. Press “ ” key to select “date & time”
3. Press “ ” to confirm. You will see current time (hours; minutes; seconds and
DD/MM/YY). Use “ ” keys to navigate. Use “ ” key to move from hours to
minutes to seconds and to days to month to year.
4. Press “ ” to exit the programming mode.
