Chicago Electric 67256 Manuale di installazione

MULTI-FUNCTION POWER TOOL

67256

SET UP AND OPERATING INSTRUCTIONS

Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

contained herein may be reproduced in any shape or form without the express written consent of

Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein. Tools required for

assembly and service may not be included.

For technical questions or replacement parts, please call 1-800-444-3353.

Revised Manual 10k

SKU 67256 For technical questions, please call 1-800-444-3353. Page 2

SAVE THIS MANUAL

Keep this manual for the safety

warnings and precautions, assembly,

operating, inspection, maintenance and

cleaning procedures. Write the product’s

serial number in the back of the manual

near the assembly diagram (or month

and year of purchase if product has no

number). Keep this manual and the

receipt in a safe and dry place for future

reference.

IMPORTANT SAFETY

INFORMATION

In this manual, on the labeling,

and all other information

provided with this product:

This is the safety alert

symbol. It is used to alert

you to potential personal

injury hazards. Obey all

safety messages that

follow this symbol to avoid

possible injury or death.

DANGER indicates

a hazardous

situation which, if not

avoided, will result in death or

serious injury.

WARNING

indicates a

hazardous situation which, if

not avoided, could result in

death or serious injury.

CAUTION, used

with the safety

alert symbol, indicates a

hazardous situation which, if

not avoided, could result in

minor or moderate injury.

NOTICE is used to

address practices

not related to personal injury.

CAUTION, without

the safety alert

symbol, is used to address

practices not related to

personal injury.

General Safety Warnings

WARNING Read all safety

warnings and instructions.

Failure to follow the warnings and

instructions may result in electric

shock, re and/or serious injury.

Save all warnings and

instructions for future reference.

The term ″power tool″ in the

warnings refers to your line-

operated (corded) power tool.

Work area safety1.

Keep work area clean and wella.

lit. Cluttered or dark areas invite

accidents.

Do not operate power tools inb.

explosive atmospheres, such as in

the presence of ammable liquids,

gases or dust. Power tools create

sparks which may ignite the dust or

fumes.

Keep children and bystandersc.

away while operating a power tool.

Distractions can cause you to lose

control.

SKU 67256 For technical questions, please call 1-800-444-3353. Page 3

Electrical safety2.

Power tool Plugs must match thea.

outlet. Never modify the Plug in

any way. Do not use any adapter

plugs with grounded power tools.

Unmodied plugs and matching

outlets will reduce risk of electric

shock.

Avoid body contact with groundedb.

surfaces such as pipes, radiators,

ranges and refrigerators. There is

an increased risk of electric shock if

your body is grounded.

Do not expose power tools to rainc.

or wet conditions. Water entering

a power tool will increase the risk of

electric shock.

Do not abuse the Power Cord.d.

Never use the Cord for carrying,

pulling or unplugging the power

tool. Keep Cord away from

heat, oil, sharp edges or moving

parts. Damaged or entangled cords

increase the risk of electric shock.

When operating a power toole.

outdoors, use an extension cord

suitable for outdoor use. Use of a

cord suitable for outdoor use reduces

the risk of electric shock.

If operating a power tool in a dampf.

location is unavoidable, use a

Ground Fault Circuit Interrupter

(GFCI) protected supply. Use of

a GFCI reduces the risk of electric

shock.

Personal safety3.

Stay alert, watch what you area.

doing and use common sense

when operating a power tool. Do

not use a power tool while you

are tired or under the inuence of

drugs, alcohol or medication. A

moment of inattention while operating

power tools may result in serious

personal injury.

Use personal protectiveb.

equipment. Always wear ANSI-

approved safety goggles. Safety

equipment such as NIOSH-approved

dust mask/respirator, NIOSH-

approved hearing protection, and

heavy duty work gloves will reduce

personal injuries.

Prevent unintentional starting.c.

Ensure the Power Switch is in the

off-position before connecting to

the power source or picking up or

carrying the tool. Carrying power

tools with your nger on the Power

Switch invites accidents.

Remove any adjusting key ord.

wrench before turning the power

tool on. A wrench or a key left

attached to an oscillating part of the

power tool may result in personal

injury.

Do not overreach. Keep propere.

footing and balance at all times.

This enables better control of the

power tool in unexpected situations.

Dress properly. Do not wear loosef.

clothing or jewelry. Keep your

hair, clothing and gloves away

from moving parts. Loose clothes,

jewelry or long hair can be caught in

moving parts.

Power tool use and care4.

Do not force the power tool. Usea.

the correct power tool for your

application. The correct power tool

will do the job better and safer at the

rate for which it was designed.

Do not use the power tool if theb.

Power Switch does not turn it on

SKU 67256 For technical questions, please call 1-800-444-3353. Page 4

and off. Any power tool that cannot

be controlled with the Switch is

dangerous and must be repaired.

Disconnect the Power Cord fromc.

the power source before making

any adjustments, changing

accessories, or storing the power

tool. Such preventive safety

measures reduce the risk of starting

the power tool accidentally.

Store idle power tools out ofd.

the reach of children and do not

allow persons unfamiliar with the

power tool or these instructions

to operate the power tool. Power

tools are dangerous in the hands of

untrained users.

Maintain power tools. Checke.

for misalignment or binding of

moving parts, breakage of parts

and any other condition that may

affect the power tool’s operation.

If damaged, have the power

tool repaired before use. Many

accidents are caused by poorly

maintained power tools.

Keep cutting accessories sharpf.

and clean. Properly maintained

cutting accessories with sharp cutting

edges are less likely to bind and are

easier to control.

Use the power tool and itsg.

accessories in accordance with

these instructions, taking into

account the working conditions

and the work to be performed.

Use of the power tool for operations

different from those intended could

result in a hazardous situation.

Service5.

Have your power tool serviced bya.

a qualied repair person using

only identical replacement parts.

This will ensure that the safety of the

power tool is maintained.

Specic Safety Warnings

Maintain labels and nameplates on1.

the power tool. These carry important

safety information. If unreadable or

missing, contact Harbor Freight Tools

for a replacement.

CAUTION: Avoid accidental injury.2.



from the oscillating Angled Scraper

(4), Blades (501, 503), and Sanding

Pad (502) when operating the Tool.

Avoid unintentional starting. Prepare3.

to begin work before turning on the

power tool.

Do not lay the power tool down until4.

it has come to a complete stop.

Moving parts can grab the surface

and pull the tool out of your control.

When using a handheld power tool,5.



both hands to resist starting torque.

Do not leave the power tool6.

unattended when it is plugged into

an electrical outlet. Turn off the tool,

and unplug it from its electrical outlet

before leaving.

This product is not a toy. Keep it out7.

of reach of children.

People with pacemakers should8.

consult their physician(s) before



proximity to heart pacemaker could

cause pacemaker interference or

pacemaker failure. In addition,

people with pacemakers should:



SKU 67256 For technical questions, please call 1-800-444-3353. Page 5



on.



avoid electrical shock.



grounded. Ground Fault Circuit

Interrupter (GFCI) should also be

implemented – it prevents sustained

electrical shock.

Some dust created by power9.

sanding, sawing, grinding, drilling,

and other construction activities,

contains chemicals known [to the

State of California] to cause cancer,

birth defects or other reproductive

harm. Some examples of these

chemicals are:





cement or other masonry products



chemically treated lumber

Your risk from these exposures

varies, depending on how often you

do this type of work. To reduce your

exposure to these chemicals: work in

a well ventilated area, and work with

approved safety equipment, such as

those dust masks that are specially



particles. (California Health & Safety

Code § 25249.5, et seq.)

Handling the Power Cord on this10.

product will expose you to lead,

a chemical known to the State of

California to cause cancer, and

birth defects or other reproductive

harm. Wash hands after handling.

(California Health & Safety Code §

25249.5, et seq.)

The warnings, precautions,11.

and instructions discussed in

this instruction manual cannot

cover all possible conditions and

situations that may occur. It must

be understood by the operator that

common sense and caution are

factors which cannot be built into this

product, but must be supplied by the

operator.

Vibration Safety

This power tool vibrates during use.



vibration may cause temporary or

permanent physical injury, particularly

to the hands, arms and shoulders. To



injury:

Anyone using vibrating power tools1.

regularly or for an extended period





ups to ensure medical problems are

not being caused or worsened from

use. Pregnant women or people

who have impaired blood circulation

to the hand, past hand injuries,

nervous system disorders, diabetes,

or Raynaud’s Disease should not

use this tool. If you feel any medical

or physical symptoms related to

vibration (such as tingling, numbness,



medical advice as soon as possible.

Do not smoke during use. Nicotine2.

reduces the blood supply to the





Wear suitable gloves to reduce the3.

vibration effects on the user.

Use power tools with the lowest4.

vibration when there is a choice

between different processes.

SKU 67256 For technical questions, please call 1-800-444-3353. Page 6

5.

day of work.

Grip the power tool as lightly as6.

possible (while still keeping safe



To reduce vibration, maintain the7.

power tool as explained in this

manual. If any abnormal vibration

occurs, stop use immediately.

SAVE THESE

INSTRUCTIONS.

GROUNDING

TO PREVENT

ELECTRIC SHOCK

AND DEATH FROM

INCORRECT GROUNDING

WIRE CONNECTION:

Check with a qualied

electrician if you are in doubt

as to whether the outlet is

properly grounded. Do not

modify the Power Cord Plug

provided with the tool. Never

remove the grounding prong

from the Plug. Do not use the

tool if the Power Cord or Plug

is damaged. If damaged, have

it repaired by a service facility

before use. If the Plug will not

t the outlet, have a proper

outlet installed by a qualied

electrician.

Double Insulated Tools: Tools

with Two Prong Plugs

Tools marked “Double Insulated”1.

do not require grounding. They

have a special double insulation



requirements and complies with the

applicable standards of Underwriters



Standard Association, and the

National Electrical Code.

(See Outlets for 2-Prong Plug.)

Double insulated tools may be used2.

in either of the 120 volt outlets shown

in the preceding illustration.

(See Outlets for 2-Prong Plug.)

Extension Cords

Grounded tools require a three wire1.

extension cord. Double Insulated

tools can use either a two or three

wire extension cord.

As the distance from the supply2.

outlet increases, you must use a

heavier gauge extension cord. Using

extension cords with inadequately

sized wire causes a serious drop in

voltage, resulting in loss of power and

possible tool damage.

(See Table A, next page.)

SKU 67256 For technical questions, please call 1-800-444-3353. Page 7

The smaller the gauge number of the3.

wire, the greater the capacity of the

cord. For example, a 14 gauge cord

can carry a higher current than a 16

gauge cord. (See Table A.)

When using more than one extension4.

cord to make up the total length,

make sure each cord contains at

least the minimum wire size required.

(See Table A.)

If you are using one extension cord5.

for more than one tool, add the

nameplate amperes and use the sum

to determine the required minimum

cord size. (See Table A.)

If you are using an extension cord6.

outdoors, make sure it is marked with



indicate it is acceptable for outdoor

use.

Make sure the extension cord is7.

properly wired and in good electrical

condition. Always replace a damaged

extension cord or have it repaired by



Protect the extension cords from8.

sharp objects, excessive heat, and

damp or wet areas.

RECOMMENDED MINIMUM WIRE

GAUGE FOR EXTENSION CORDS*

(120/240 VOLT)

NAMEPLATE

AMPERES

(at full load)

EXTENSION CORD

LENGTH

25’

50’

75’

100’

150’

0 – 2.0 18 18 18 18 16

2.1 – 3.4 18 18 18 16 14

3.5 – 5.0 18 18 16 14 12

5.1 – 7.0 18 16 14 12 12

7.1 – 12.0 18 14 12 10 

TABLE A

* Based on limiting the line

voltage drop to ve volts at

150% of the rated amperes.

Symbology

Double Insulated

Canadian Standards Association



V~ Volts Alternating Current

AAmperes

n0xxxx/min.



(RPM)

SPECIFICATIONS

Electrical Input 120 V~ / 60 Hz / 1.6 A

 19,000 OPM

Sanding Pad Dimensions 3” Triangle

Accessories

Sanding Pad (Qty 1)

Sanding Sheet (Qty 2)

Angled Cutter Blade

(Qty 1)

Angled Scraper (Qty 1)

Half Moon Cutter Blade

(Qty 1)

UNPACKING

When unpacking, check to make sure

that the item is intact and undamaged. If

any parts are missing or broken, please

call Harbor Freight Tools at



REV 09f, 10b, 10e

SKU 67256 For technical questions, please call 1-800-444-3353. Page 8

COMPONENTS

Angled Scraper (4)

Tool

Angled Cutter

Blade (501)

Half Moon Cutter Blade (503)

(not shown):

Two replacement

Carbon Brushes (40)

Sanding

Sheets (504)

Sanding

Pad

(502)

Hex Wrench (505)

Power Switch (44)

OFF

Small Washer (2)



Cap Screw (1)

Spindle (5)

Figure A

ASSEMBLY INSTRUCTIONS

Read the ENTIRE IMPORTANT

SAFETY INFORMATION

section at the beginning of this

manual including all text under

subheadings therein before set

up or use of this product.

TO PREVENT

SERIOUS INJURY

FROM ACCIDENTAL

OPERATION:

Turn the Power Switch (44) off

and unplug the tool from its

electrical outlet before

assembly.

Note: For additional information regarding

the parts listed in the following pages,

refer to the Assembly Diagram near

the end of this manual.

Turn the Power Switch off and unplug1.

the tool.

Attachment

[Angled

Scraper (4)]

Spindle

(5)

Figure B

2. Place the attachment over the

Spindle (5), shoulder facing away



the attachment with the pins on the

Spindle shoulder.

(See Figure B.)

Figure C

Attachments (with the exception of

the long Angled Cutter Blades) may

REV 10e

SKU 67256 For technical questions, please call 1-800-444-3353. Page 9

be mounted at angles up to 90° left or

right.

Figure D

Angled Cutter Blade (501)

Note: The long Angled Cutter Blade (501)

should only be used in the straight

ahead position. (See Figure D.)

Place Large

Washer,

cupped side

down

Figure E

3. Slide the Small Washer (2), then the



Screw (1). Make sure the cupped



the tool. While holding the attachment

over the pins on the tool, thread the

Cap Screw in place. (See Figure E.)

Torque to 10 ft-lbs

Figure F

4. Tighten the cap screw onto the

Spindle using the provided hex key.

Torque rmly (approximately 10

ft-lbs). After securing, the attachment

should not move on the spindle. If it

can move with the power off, remount

it, making sure that the holes on the

attachment line up with the pins on

the spindle. Tighten the cap screw

securely.

REV 10e

SKU 67256 For technical questions, please call 1-800-444-3353. Page 10

OPERATING INSTRUCTIONS

Read the ENTIRE IMPORTANT

SAFETY INFORMATION

section at the beginning of this

manual including all text under

subheadings therein before set

up or use of this product.

Work Piece and Work Area Set Up

Designate a work area that is clean1.



allow access by children or pets to

prevent injury and distraction.

Route the Power Cord (46) along a2.

safe route to reach the work area

without creating a tripping hazard or

exposing the Power Cord to possible

damage. The Power Cord must

reach the work area with enough

extra length to allow free movement

while working.

Secure loose work pieces using3.

a vise or clamps (not included) to

prevent movement while working.

General Operating Instructions

With the tool unplugged, mount the1.

desired attachment in place.

Pull the Power Switch (44) back to2.

its off position. Then plug the Power

Cord (46) into the nearest 120 volt,

grounded electrical outlet.

To turn on the tool, slide the Power3.

Switch (44) forward.

Do not allow contact between4.

the Sanding Sheet (504), Angled

Scraper (4), or Blade (501, 503) and

workpiece until the tool is running at

full speed.

Avoid contact with foreign objects5.

such as metal screws and nails when

sanding, scraping, or cutting.

Do not apply excessive pressure6.

on the tool. Allow the tool to do the

work.

7.

allow it to completely stop before

setting it down. Then unplug the tool

from its electrical outlet.

To replace the Sanding Sheet, simply8.

pull it off the pad and press a new

sheet in place.

Prior to storing the tool, remove the9.

attachment and wipe it clean. Store

the Tool in a clean, dry, safe location

out of reach of children and other

unauthorized persons.

REV 10e

Indice

Altri manuali Chicago Electric Levigatrice

Chicago Electric

Chicago Electric 90820 Manuale utente

Chicago Electric

Chicago Electric 62216 Manuale di istruzioni originale

Chicago Electric

Chicago Electric 41213 Manuale utente

Chicago Electric

Chicago Electric 62297 Istruzioni per il montaggio

Chicago Electric

Chicago Electric 90045 Manuale di installazione

Chicago Electric

Chicago Electric 41213 Manuale di installazione

Chicago Electric

Chicago Electric 92623 Manuale utente

Chicago Electric

Chicago Electric 66615 Manuale di installazione

Chicago Electric

Chicago Electric 92158 Manuale elenco delle parti

Chicago Electric

Chicago Electric CHICAGO 46507 Manuale utente

Chicago Electric

Chicago Electric 92158 Istruzioni per il montaggio

Chicago Electric

Chicago Electric 69924 Istruzioni per il montaggio

Chicago Electric

Chicago Electric 96435 Manuale di installazione

Chicago Electric

Chicago Electric 45813 Manuale utente

Chicago Electric

Chicago Electric 69917 Istruzioni per il montaggio

Chicago Electric

Chicago Electric 66891 Manuale di installazione

Chicago Electric

Chicago Electric 69696 Istruzioni per il montaggio

Chicago Electric

Chicago Electric 69820 Istruzioni per il montaggio

Chicago Electric

Chicago Electric 95020 Manuale utente

Chicago Electric

Chicago Electric 42864 Manuale elenco delle parti

Chicago Electric

Chicago Electric 97593 Manuale di installazione

Chicago Electric

Chicago Electric 92194 Manuale utente

Chicago Electric

Chicago Electric 43424 Assembly and Manuale utente

Chicago Electric

Chicago Electric 90045 Manuale utente

Manuali Levigatrice popolari di altre marche

Oliver

Oliver 6305 Manuale utente

Jet

Jet 22-44 Pro-3 Manuale di servizio

Makita

Makita M9204 Manuale

Makita

Makita M9204 Manuale utente

Craftsman

Craftsman 351.215131 Manuale utente

Clarke

Clarke Woodworker CBS1-5B Manuale di istruzioni

Chicago Pneumatic

Chicago Pneumatic CP9778 Manuale utente

Nitto Kohki

Nitto Kohki BB-20 Manuale utente

Ferm

Ferm FEOS-135 Manuale utente

Unior

Unior 1510 Manuale utente

stayer

stayer ls1200 Manuale utente

Jet

Jet JSG-96 Manuale di servizio

Parkside

Parkside PDS 290 B2 Manuale utente

Status

Status XPA Series Manuale utente

Clarke

Clarke EZ Sand Manuale utente

Craftsman

Craftsman 113.22521 Manuale utente

Craftsman

Craftsman 113.225831 Manuale utente

CLAS

CLAS OP 1429 Manuale utente