Chicago Electric 56708 Istruzioni per il montaggio

!"#$%&'()*$&+"(*&+$,)-)#$(./

01+1#&"2-&3$4+1#$&)#%&5##,%66333/5)-4"-7-$185#/9":

;:)1(&"2-&#$95<19)(&+2,,"-#&)#%&,-"*29#+2,,"-#=5)-4"-7-$185#/9":

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the

back of the manual near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference. 19i

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly an d se rv ic e may n ot b e in cl uded.

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

Page 2 >"-&#$95<19)(&?2$+#1"<+@&,($)+$&9)((&ABCCCBCDDBEFGF/ ITEM 56708

HI>;JK LM;NIJOL! PIO!J;!I!Q;H;JRM

J)4($&"7&Q"<#$<#+

Safety ......................................................... 2

Setup .......................................................... 8

Specifications ............................................. 8

Operation ................................................... 11

Maintenance .............................................. 14

Parts List and Diagram .............................. 18

Warranty .................................................... 20

SIN!O!T&HKP'LUH&I!V&V;>O!OJOL!H

This is the safety alert symbol. It is used to alert you to potential

personal injury hazards. Obey all safety messages that

follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,

will result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

Addresses practices not related to personal injury.

OPMLNJI!J&HI>;JK&O!>LNPIJOL!

T$<$-)(&M"3$-&J""(&H)7$#.&S)-<1<8+

N$)*&)((&+)7$#.&3)-<1<8+@&1<+#-29#1"<+@&1((2+#-)#1"<+&)<*&+,$91719)#1"<+&,-"W1*$*&31#5&#51+&,"3$-&#""(/&

Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.

H)W$&)((&3)-<1<8+&)<*&1<+#-29#1"<+&7"-&72#2-$&-$7$-$<9$/

The term “power tool” in the warnings refers to your mains-operated (corded)

power tool or battery-operated (cordless) power tool.

1. S"-X&)-$)&+)7$#.

a. Y$$,&3"-X&)-$)&9($)<&)<*&3$((&(1#/&

Cluttered or dark areas invite accidents.

b. V"&<"#&",$-)#$&,"3$-&#""(+&1<&$Z,("+1W$&

)#:"+,5$-$+@&+295&)+&1<&#5$&,-$+$<9$&"7&

7()::)4($&(1?21*+@&8)+$+&"-&*2+#/&Power tools

create sparks which may ignite the dust or fumes.

c. Y$$,&951(*-$<&)<*&4.+#)<*$-+&)3).&

351($&",$-)#1<8&)&,"3$-&#""(/&Distractions

can cause you to lose control.

2. ;($9#-19)(&+)7$#.

a. M"3$-&#""(&,(28+&:2+#&:)#95&#5$&"2#($#/&

!$W$-&:"*17.&#5$&,(28&1<&)<.&3)./&V"&<"#&2+$&

)<.&)*),#$-&,(28+&31#5&$)-#5$*&[8-"2<*$*\&

,"3$-&#""(+/&Unmodified plugs and matching

outlets will reduce risk of electric shock.

b. IW"1*&4"*.&9"<#)9#&31#5&$)-#5$*&"-&

8-"2<*$*&+2-7)9$+@&+295&)+&,1,$+@&

-)*1)#"-+@&-)<8$+&)<*&-$7-18$-)#"-+/&

There is an increased risk of electric shock

if your body is earthed or grounded.

c. V"&<"#&$Z,"+$&,"3$-&#""(+&#"&-)1<&"-&3$#&

9"<*1#1"<+/&Water entering a power tool

will increase the risk of electric shock.

Page 3>"-&#$95<19)(&?2$+#1"<+@&,($)+$&9)((&ABCCCBCDDBEFGF/ITEM 56708

HI>;JKLM;NIJOL!PIO!J;!I!Q; H;JRM

d. V"&<"#&)42+$&#5$&9"-*/&!$W$-&2+$&#5$&9"-*&

7"-&9)--.1<8@&,2((1<8&"-&2<,(2881<8&#5$&,"3$-&

#""(/&Y$$,&9"-*&)3).&7-":&5$)#@&"1(@&+5)-,&

$*8$+&"-&:"W1<8&,)-#+/&Damaged or entangled

cords increase the risk of electric shock.

e. S5$<&",$-)#1<8&)&,"3$-&#""(&"2#*""-+@&

2+$&)<&$Z#$<+1"<&9"-*&+21#)4($&7"-&"2#*""-&

2+$/&Use of a cord suitable for outdoor

use reduces the risk of electric shock.

f. O7&",$-)#1<8&)&,"3$-&#""(&1<&)&*):,&("9)#1"<&

1+&2<)W"1*)4($@&2+$&)&8-"2<*&7)2(#&91-921#&

1<#$--2,#$-&[T>QO\&,-"#$9#$*&+2,,(./&Use of

a GFCI reduces the risk of electric shock.

3. M$-+"<)(&+)7$#.

a. H#).&)($-#@&3)#95&35)#&."2&)-$&*"1<8&)<*&

2+$&9"::"<&+$<+$&35$<&",$-)#1<8&)&

,"3$-&#""(/&V"&<"#&2+$&)&,"3$-&#""(&351($&

."2&)-$&#1-$*&"-&2<*$-&#5$&1<7(2$<9$&"7&

*-28+@&)(9"5"(&"-&:$*19)#1"</&&A moment

of inattention while operating power tools

may result in serious personal injury.

b. R+$&,$-+"<)(&,-"#$9#1W$&$?21,:$<#/&I(3).+&

3$)-&$.$&,-"#$9#1"</&&Protective equipment

such as dust mask, non-skid safety shoes, hard

hat, or hearing protection used for appropriate

conditions will reduce personal injuries.

c. M-$W$<#&2<1<#$<#1"<)(&+#)-#1<8/&;<+2-$&#5$&

+31#95&1+&1<&#5$&"77B,"+1#1"<&4$7"-$&9"<<$9#1<8&

#"&,"3$-&+"2-9$&)<*6"-&4)##$-.&,)9X@&,19X1<8&

2,&"-&9)--.1<8&#5$&#""(/&Carrying power tools

with your finger on the switch or energizing power

tools that have the switch on invites accidents.

d. N$:"W$&)<.&)*]2+#1<8&X$.&"-&3-$<95&

4$7"-$&#2-<1<8&#5$&,"3$-&#""(&"</&&A wrench

or a key left attached to a rotating part of the

power tool may result in personal injury.

e. V"&<"#&"W$--$)95/&Y$$,&,-",$-&7""#1<8&)<*&

4)()<9$&)#&)((&#1:$+/ This enables better control

of the power tool in unexpected situations.

f. V-$++&,-",$-(./&V"&<"#&3$)-&(""+$&9("#51<8&

"-&]$3$(-./&Y$$,&."2-&5)1-@&9("#51<8&

)<*&8("W$+&)3).&7-":&:"W1<8&,)-#+/&&

Loose clothes, jewelry or long hair

can be caught in moving parts.

g. O7&*$W19$+&)-$&,-"W1*$*&7"-&#5$&9"<<$9#1"<&

"7&*2+#&$Z#-)9#1"<&)<*&9"(($9#1"<&

7)91(1#1$+@&$<+2-$&#5$+$&)-$&9"<<$9#$*&

)<*&,-",$-(.&2+$*/&&Use of dust collection

can reduce dust-related hazards.

h. V"&<"#&($#&7):1(1)-1#.&8)1<$*&7-":&7-$?2$<#&

2+$&"7&#""(+&)(("3&."2&#"&4$9":$&

9":,()9$<#&)<*&18<"-$&#""(&+)7$#.&

,-1<91,($+/&&A careless action can cause

severe injury within a fraction of a second.

i. Only use safety equipment that has been

approved by an appropriate standards agency.

Unapproved safety equipment may not provide

adequate protection. Eye protection must be

ANSI-approved and breathing protection

must be NIOSH-approved for the

specific hazards in the work area.

j. Avoid unintentional starting.

Prepare to begin work before turning on the tool.

k. Do not leave the tool unattended when

it is plugged into an electrical outlet.

Turn off the tool, and unplug it from its

electrical outlet before leaving.

l. This product is not a toy.

Keep it out of reach of children.

m. People with pacemakers should consult their

physician(s) before use. Electromagnetic fields

in close proximity to heart pacemaker could

cause pacemaker interference or pacemaker

failure. In addition, people with pacemakers

should:

• Avoid operating alone.

• Do not use with Trigger locked on.

• Properly maintain and inspect to avoid

electrical shock.

• Properly ground power cord.

Ground Fault Circuit Interrupter (GFCI)

should also be implemented – it prevents

sustained electrical shock.

n. The warnings, precautions, and instructions

discussed in this instruction manual cannot

cover all possible conditions and situations

that may occur. It must be understood by the

operator that common sense and caution are

factors which cannot be built into this product,

but must be supplied by the operator.

4. M"3$-&#""(&2+$&)<*&9)-$

a. V"&<"#&7"-9$&#5$&,"3$-&#""(/&R+$&#5$&9"--$9#&

,"3$-&#""(&7"-&."2-&),,(19)#1"</&&The correct

power tool will do the job better and safer

at the rate for which it was designed.

b. V"&<"#&2+$&#5$&,"3$-&#""(&17&#5$&+31#95&

*"$+&<"#&#2-<&1#&"<&)<*&"77/&&Any power

tool that cannot be controlled with the switch

is dangerous and must be repaired.

c. V1+9"<<$9#&#5$&,(28&7-":&#5$&,"3$-&

+"2-9$&)<*6"-&-$:"W$&#5$&4)##$-.&,)9X@&

17&*$#)95)4($@&7-":&#5$&,"3$-&#""(&4$7"-$&

:)X1<8&)<.&)*]2+#:$<#+@&95)<81<8&

)99$++"-1$+@&"-&+#"-1<8&,"3$-&#""(+/&&

Such preventive safety measures reduce the

risk of starting the power tool accidentally.

d. H#"-$&1*($&,"3$-&#""(+&"2#&"7&#5$&-$)95&"7&

951(*-$<&)<*&*"&<"#&)(("3&,$-+"<+&2<7):1(1)-&

31#5&#5$&,"3$-&#""(&"-&#5$+$&1<+#-29#1"<+&

#"&",$-)#$&#5$&,"3$-&#""(/&&Power tools are

dangerous in the hands of untrained users.

Page 4 >"-&#$95<19)(&?2$+#1"<+@&,($)+$&9)((&ABCCCBCDDBEFGF/ ITEM 56708

HI>;JK LM;NIJOL! PIO!J;!I!Q;H;JRM

e. P)1<#)1<&,"3$-&#""(+&)<*&)99$++"-1$+/&

Q5$9X&7"-&:1+)(18<:$<#&"-&41<*1<8&"7&:"W1<8&

,)-#+@&4-$)X)8$&"7&,)-#+&)<*&)<.&"#5$-&

9"<*1#1"<&#5)#&:).&)77$9#&#5$&,"3$-&#""(^+&

",$-)#1"</&O7&*):)8$*@&5)W$&#5$&,"3$-&#""(&

-$,)1-$*&4$7"-$&2+$/&&Many accidents are

caused by poorly maintained power tools.

f. Y$$,&92##1<8&#""(+&+5)-,&)<*&9($)</&&Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

g. R+$&#5$&,"3$-&#""(@&)99$++"-1$+&)<*&#""(&41#+&

$#9/&1<&)99"-*)<9$&31#5&#5$+$&1<+#-29#1"<+@&

#)X1<8&1<#"&)99"2<#&#5$&3"-X1<8&9"<*1#1"<+&

)<*&#5$&3"-X&#"&4$&,$-7"-:$*/&&Use of the

power tool for operations different from those

intended could result in a hazardous situation.

h. Y$$,&5)<*($+&)<*&8-)+,1<8&+2-7)9$+&

*-.@&9($)<&)<*&7-$$&7-":&"1(&)<*&8-$)+$/&&

Slippery handles and grasping surfaces

do not allow for safe handling and control

of the tool in unexpected situations.

5. H$-W19$

a. _)W$&."2-&,"3$-&#""(&+$-W19$*&4.&)&

?2)(171$*&-$,)1-&,$-+"<&2+1<8&"<(.&1*$<#19)(&

-$,()9$:$<#&,)-#+/&&This will ensure that

the safety of the power tool is maintained.

b. Maintain labels and nameplates on the tool.

These carry important safety information.

If unreadable or missing, contact

Harbor Freight Tools for a replacement.

6. H)7$#.&1<+#-29#1"<+&7"-&:1#-$&+)3+

a. P1#-$&+)3+&)-$&1<#$<*$*&#"&92#&3""*&"-&

3""*B(1X$&,-"*29#+@&#5$.&9)<<"#&4$&2+$*&

31#5&)4-)+1W$&92#B"77&35$$(+&7"-&92##1<8&

7$--"2+&:)#$-1)(&+295&)+&4)-+@&-"*+@&+#2*+@&

$#9/&Abrasive dust causes moving parts

such as the lower guard to jam. Sparks from

abrasive cutting will burn the lower guard,

the kerf insert and other plastic parts.

b. R+$&9():,+&#"&+2,,"-#&#5$&3"-X,1$9$&

35$<$W$-&,"++14($/&O7&+2,,"-#1<8&#5$&

3"-X,1$9$&4.&5)<*@&."2&:2+#&)(3).+&X$$,&

."2-&5)<*&)#&($)+#&A``&::&7-":&$1#5$-&+1*$&

"7&#5$&+)3&4()*$/&V"&<"#&2+$&#51+&+)3&#"&

92#&,1$9$+&#5)#&)-$&#""&+:)((&#"&4$&+$92-$(.&

9():,$*&"-&5$(*&4.&5)<*/ If your hand is

placed too close to the saw blade, there is an

increased risk of injury from blade contact.

c. J5$&3"-X,1$9$&:2+#&4$&+#)#1"<)-.&)<*&

9():,$*&"-&5$(*&)8)1<+#&4"#5&#5$&7$<9$&

)<*&#5$&#)4($/&V"&<"#&7$$*&#5$&3"-X,1$9$&

into the blade or cut ″freehand″ in any way.

Unrestrained or moving workpieces could

be thrown at high speeds, causing injury.

d. M2+5&#5$&+)3&#5-"285&#5$&3"-X,1$9$/&V"&

<"#&,2((&#5$&+)3&#5-"285&#5$&3"-X,1$9$/&J"&

:)X$&)&92#@&-)1+$&#5$&+)3&5$)*&)<*&,2((&1#&"2#&

"W$-&#5$&3"-X,1$9$&31#5"2#&92##1<8@&+#)-#&#5$&

:"#"-@&,-$++&#5$&+)3&5$)*&*"3<&)<*&,2+5&

#5$&+)3&#5-"285&#5$&3"-X,1$9$/ Cutting on

the pull stroke is likely to cause the saw blade

to climb on top of the workpiece and violently

throw the blade assembly towards the operator.

e. !$W$-&9-"++&."2-&5)<*&"W$-&#5$&1<#$<*$*&

(1<$&"7&92##1<8&$1#5$-&1<&7-"<#&"-&4$51<*&

#5$&+)3&4()*$/&Supporting the workpiece

″cross handed″ i.e. holding the workpiece

to the right of the saw blade with your left

hand or vice versa is very dangerous.

f. V"&<"#&-$)95&4$51<*&#5$&7$<9$&31#5&$1#5$-&

5)<*&9("+$-&#5)<&A``&::&7-":&$1#5$-&

+1*$&"7&#5$&+)3&4()*$@&#"&-$:"W$&3""*&

+9-),+@&"-&7"-&)<.&"#5$-&-$)+"<&351($&

#5$&4()*$&1+&+,1<<1<8/&The proximity of the

spinning saw blade to your hand may not be

obvious and you may be seriously injured.

g. O<+,$9#&."2-&3"-X,1$9$&4$7"-$&92##1<8/&O7&#5$&

3"-X,1$9$&1+&4"3$*&"-&3)-,$*@&9():,&1#&31#5&

#5$&"2#+1*$&4"3$*&7)9$&#"3)-*&#5$&7$<9$/&

I(3).+&:)X$&9$-#)1<&#5)#&#5$-$&1+&<"&8),&

4$#3$$<&#5$&3"-X,1$9$@&7$<9$&)<*&#)4($&)("<8&

#5$&(1<$&"7&#5$&92#/&Bent or warped workpieces

can twist or shift and may cause binding on the

spinning saw blade while cutting. There should

be no nails or foreign objects in the workpiece.

h. V"&<"#&2+$&#5$&+)3&2<#1(&#5$&#)4($&1+&9($)-&

"7&)((&#""(+@&3""*&+9-),+@&$#9/@&$Z9$,#&7"-&

#5$&3"-X,1$9$/&Small debris or loose pieces

of wood or other objects that contact the

revolving blade can be thrown with high speed.

i. Q2#&"<(.&"<$&3"-X,1$9$&)#&)&#1:$/&

Stacked multiple workpieces cannot be

adequately clamped or braced and may

bind on the blade or shift during cutting.

j. ;<+2-$&#5$&:1#-$&+)3&1+&:"2<#$*&"-&,()9$*&

"<&)&($W$(@&71-:&3"-X&+2-7)9$&4$7"-$&2+$/&

A level and firm work surface reduces the

risk of the mitre saw becoming unstable.

k. M()<&."2-&3"-X/&;W$-.&#1:$&."2&95)<8$&#5$&

4$W$(&"-&:1#-$&)<8($&+$##1<8@&:)X$&+2-$&#5$&

)*]2+#)4($&7$<9$&1+&+$#&9"--$9#(.&#"&+2,,"-#&

#5$&3"-X,1$9$&)<*&31((&<"#&1<#$-7$-$&31#5&

#5$&4()*$&"-&#5$&82)-*1<8&+.+#$:/&Without

turning the tool ″ON″ and with no workpiece

on the table, move the saw blade through a

complete simulated cut to assure there will be

no interference or danger of cutting the fence.

l. M-"W1*$&)*$?2)#$&+2,,"-#&+295&)+&#)4($&

$Z#$<+1"<+@&+)3&5"-+$+@&$#9/&7"-&)&3"-X,1$9$&

#5)#&1+&31*$-&"-&("<8$-&#5)<&#5$&#)4($&#",/&

Workpieces longer or wider than the mitre saw

table can tip if not securely supported. If the

cut-off piece or workpiece tips, it can lift the

lower guard or be thrown by the spinning blade.

Page 5>"-&#$95<19)(&?2$+#1"<+@&,($)+$&9)((&ABCCCBCDDBEFGF/ITEM 56708

HI>;JKLM;NIJOL!PIO!J;!I!Q; H;JRM

m. V"&<"#&2+$&)<"#5$-&,$-+"<&)+&)&+24+#1#2#$&

7"-&)&#)4($&$Z#$<+1"<&"-&)+&)**1#1"<)(&

+2,,"-#/&Unstable support for the workpiece

can cause the blade to bind or the workpiece

to shift during the cutting operation pulling

you and the helper into the spinning blade.

n. J5$&92#B"77&,1$9$&:2+#&<"#&4$&])::$*&"-&

,-$++$*&4.&)<.&:$)<+&)8)1<+#&#5$&+,1<<1<8&

+)3&4()*$/&If confined, i.e. using length

stops, the cut-off piece could get wedged

against them blade and thrown violently.

o. I(3).+&2+$&)&9():,&"-&)&71Z#2-$&*$+18<$*&

#"&,-",$-(.&+2,,"-#&-"2<*&:)#$-1)(&+295&)+&

-"*+&"-&#241<8/&Rods have a tendency to roll

while being cut, causing the blade to ″bite″ and

pull the work with your hand into the blade.

p. U$#&#5$&4()*$&-$)95&72((&+,$$*&4$7"-$&

9"<#)9#1<8&#5$&3"-X,1$9$/&This will reduce

the risk of the workpiece being thrown.

q. O7&#5$&3"-X,1$9$&"-&4()*$&4$9":$+&])::$*@&

#2-<&#5$&:1#-$&+)3&"77/&S)1#&7"-&)((&:"W1<8&

,)-#+&#"&+#",&)<*&*1+9"<<$9#&#5$&,(28&

7-":&#5$&,"3$-&+"2-9$&)<*6"-&-$:"W$&

#5$&4)##$-.&,)9X/&J5$<&3"-X&#"&7-$$&#5$&

])::$*&:)#$-1)(/&Continued sawing with

a jammed workpiece could cause loss of

control or damage to the .mitre saw.

r. I7#$-&71<1+51<8&#5$&92#@&-$($)+$&#5$&+31#95@&

5"(*&#5$&+)3&5$)*&*"3<&)<*&3)1#&7"-&

#5$&4()*$&#"&+#",&4$7"-$&-$:"W1<8&#5$&

92#B"77&,1$9$/&Reaching with your hand

near the coasting blade is dangerous.

s. _"(*&#5$&5)<*($&71-:(.&35$<&:)X1<8&)<&

1<9":,($#$&92#&"-&35$<&-$($)+1<8&#5$&+31#95&

4$7"-$&#5$&+)3&5$)*&1+&9":,($#$(.&1<&#5$&

*"3<&,"+1#1"</&The braking action of the

saw may cause the saw head to be suddenly

pulled downward, causing a risk of injury.

7. 014-)#1"<&H)7$#.

This tool vibrates during use.

Repeated or long-term exposure to vibration may

cause temporary or permanent physical injury,

particularly to the hands, arms and shoulders.

To reduce the risk of vibration-related injury:

a. Anyone using vibrating tools regularly or for

an extended period should first be examined

by a doctor and then have regular medical

check-ups to ensure medical problems are not

being caused or worsened from use. Pregnant

women or people who have impaired blood

circulation to the hand, past hand injuries,

nervous system disorders, diabetes, or

Raynaud’s Disease should not use this tool.

If you feel any symptoms related to

vibration (such as tingling, numbness,

and white or blue fingers), seek medical

advice as soon as possible.

b. Do not smoke during use. Nicotine reduces

the blood supply to the hands and fingers,

increasing the risk of vibration-related injury.

c. Wear suitable gloves to reduce the

vibration effects on the user.

d. Use tools with the lowest vibration

when there is a choice.

e. Include vibration-free periods each day of work.

f. Grip tool as lightly as possible (while still keeping

safe control of it). Let the tool do the work.

g. To reduce vibration, maintain the tool as

explained in this manual. If any abnormal

vibration occurs, stop use immediately.

Page 6 >"-&#$95<19)(&?2$+#1"<+@&,($)+$&9)((&ABCCCBCDDBEFGF/ ITEM 56708

HI>;JK LM;NIJOL! PIO!J;!I!Q;H;JRM

T-"2<*1<8

JL&MN;0;!J&;U;QJNOQ&H_LQY&I!V&V;IJ_&>NLP&

O!QLNN;QJ&TNLR!VO!T&SON;&QL!!;QJOL!%&

Q5$9X&31#5&)&?2)(171$*&$($9#-191)<&17&."2&)-$&1<&*"24#&)+&#"&35$#5$-&#5$&"2#($#&1+&,-",$-(.&

8-"2<*$*/&&V"&<"#&:"*17.&#5$&,"3$-&9"-*&,(28&,-"W1*$*&31#5&#5$&#""(/&&!$W$-&-$:"W$&#5$&

8-"2<*1<8&,-"<8&7-":&#5$&,(28/&&V"&<"#&2+$&#5$&#""(&17&#5$&,"3$-&9"-*&"-&,(28&1+&*):)8$*/&&O7&*):)8$*@&5)W$&

1#&-$,)1-$*&4.&)&+$-W19$&7)91(1#.&4$7"-$&2+$/&&O7&#5$&,(28&31((&<"#&71#&#5$&"2#($#@&5)W$&)&,-",$-&"2#($#&1<+#)(($*&4.&

)&?2)(171$*&$($9#-191)</

T-"2<*$*&J""(+%&J""(+&31#5&J5-$$&M-"<8&M(28+

aBM-"<8&M(28&)<*&L2#($#

1. Tools marked with “Grounding Required” have

a three wire cord and three prong grounding

plug. The plug must be connected to a properly

grounded outlet. If the tool should electrically

malfunction or break down, grounding provides

a low resistance path to carry electricity

away from the user, reducing the risk of

electric shock. [H$$&aBM-"<8&M(28&)<*&L2#($#/\

2. The grounding prong in the plug is connected

through the green wire inside the cord to the

grounding system in the tool. The green wire

in the cord must be the only wire connected to

the tool’s grounding system and must never

be attached to an electrically “live” terminal.

[H$$&aBM-"<8&M(28&)<*&L2#($#/\

3. The tool must be plugged into an appropriate

outlet, properly installed and grounded in

accordance with all codes and ordinances.

The plug and outlet should look like those in the

preceding illustration.

[H$$&aBM-"<8&M(28&)<*&L2#($#/\

Page 7>"-&#$95<19)(&?2$+#1"<+@&,($)+$&9)((&ABCCCBCDDBEFGF/ITEM 56708

HI>;JKLM;NIJOL!PIO!J;!I!Q; H;JRM

;Z#$<+1"<&Q"-*+

1. Grounded tools require a three

wire extension cord. Double Insulated tools can

use either a two or three wire extension cord.

2. As the distance from the supply outlet

increases, you must use a heavier gauge

extension cord. Using extension cords with

inadequately sized wire causes a serious

drop in voltage, resulting in loss of power

and possible tool damage. [H$$&J)4($&I/\

3. The smaller the gauge number of the wire, the

greater the capacity of the cord. For example,

a 14 gauge cord can carry a higher current

than a 16 gauge cord. [H$$&J)4($&I/\

4. When using more than one extension cord

to make up the total length, make sure

each cord contains at least the minimum

wire size required. [H$$&J)4($&I/\

5. If you are using one extension cord for more

than one tool, add the nameplate&amperes

and use the sum to determine the required

minimum cord size. [H$$&J)4($&I/\

6. If you are using an extension cord

outdoors, make sure it is marked with the

suffix “W-A” (“W” in Canada) to indicate

it is acceptable for outdoor use.

7. Make sure the extension cord is properly wired

and in good electrical condition. Always replace

a damaged extension cord or have it repaired

by a qualified electrician before using it.

8. Protect the extension cords from sharp objects,

excessive heat, and damp or wet areas.

JI'U;&I%&&N;QLPP;!V;V&PO!OPRP&SON;&

TIRT;&>LN&;bJ;!HOL!&QLNVHc&[Ad`6de`&0LUJ\

!IP;MUIJ;

IPM;N;H

[)#&72((&(")*\

;bJ;!HOL!&QLNV&

U;!TJ_

dEf E`f FEf A``f AE`f

0 – 2.0 18 18 18 18 16

2.1 – 3.4 18 18 18 16 14

3.5 – 5.0 18 18 16 14 12

5.1 – 7.0 18 16 14 12 12

7.1 – 12.0 18 14 12 10 -

12.1 – 16.0 14 12 10 - -

16.1 – 20.0 12 10 - - -

c&')+$*&"<&(1:1#1<8&#5$&(1<$&W"(#)8$&*-",&#"&71W$&W"(#+&)#&

AE`g&"7&#5$&-)#$*&):,$-$+/

H.:4"("8.

Double Insulated

0Volts

hAlternating Current

IAmperes

n0 xxxx/min. No Load Revolutions per Minute (RPM)

WARNING marking concerning Risk

of Eye Injury. Wear ANSI-approved

safety goggles with side shields.

Read the manual before

set-up and/or use.

WARNING marking

concerning Risk of Fire.

Do not cover ventilation ducts.

Keep flammable objects away.

WARNING marking concerning

Risk of Electric Shock.

Properly connect power cord

to appropriate outlet.

Page 8 >"-&#$95<19)(&?2$+#1"<+@&,($)+$&9)((&ABCCCBCDDBEFGF/ ITEM 56708

HI>;JK LM;NIJOL! PIO!J;!I!Q;H;JRM

H,$91719)#1"<+

Motor 120 VAC / 60 Hz / 15 A

5,000 RPM

Arbor Diameter 5/8″

Recommended

Blade Type

General Purpose

with Carbide Tips

Blade Diameter 10″

Cutting Capacity

At 90°: 2-3/4″ Deep x

12″ Wide. At 45°: 1-9/16″

Deep x 8-1/4″ Wide.

Positive Table Stops 0°, 15°, 22.5°, 30° and

45° Right and Left

Positive Bevel Stops 0° and 45° Left only

Blade Tilt Range

0° – 45° Right

and Left Miter

0° – 45° left

Scale 1° per scale mark

U1+#&"7&Q"<#$<#+

V$+9-1,#1"< i#.

Compound Sliding Miter Saw 1

Table Extensions 2

Dust Collection Bag 1

Wrench 1

Page 9>"-&#$95<19)(&?2$+#1"<+@&,($)+$&9)((&ABCCCBCDDBEFGF/ITEM 56708

HI>;JKLM;NIJOL!PIO!J;!I!Q; H;JRM

H$#2,&B&'$7"-$&R+$%

N$)*&#5$&;!JON;&OPMLNJI!J&HI>;JK&O!>LNPIJOL!&+$9#1"<&&

)#&#5$&4$81<<1<8&"7&#51+&:)<2)(&1<9(2*1<8&)((&#$Z#&2<*$-&+245$)*1<8+&#5$-$1<&&

4$7"-$&+$#&2,&"-&2+$&"7&#51+&,-"*29#/

SIN!O!T

JL&MN;0;!J&H;NOLRH&O!jRNK&>NLP&IQQOV;!JIU&LM;NIJOL!%&

J2-<&#5$&M"3$-&H31#95&"7&#5$&#""(&#"&1#+&kL>>l&,"+1#1"<&)<*&2<,(28&#5$&#""(&7-":&1#+&

$($9#-19)(&"2#($#&4$7"-$&)++$:4(1<8&"-&:)X1<8&)<.&)*]2+#:$<#+&#"&#5$&#""(/

!"#$% For additional information regarding the parts listed in the following pages,

refer to the Assembly Diagram near the end of this manual.

I++$:4(.

I##)951<8&#5$&;Z#$<+1"<&H2,,"-#+&

)<*&P1#$-&U"9X&_)<*($

1. Insert the ends of the Extension Supports into

the holes in the sides of the Base. Tighten the

Wing Screws to hold the Extensions in place.

The upper edge of the Extensions will be level

with the surface of the saw. This provides a

wider base for the work material to rest on.

2. Thread the Miter Lock Handle into

the Plate until securely in place.

I##)951<8&#5$&V2+#&Q"(($9#1"<&')8

3. The Dust Collection Bag slips over the Dust Outlet

behind the Blade Housing Assembly. Sawdust

created by cutting is captured in the bag.

P"2<#1<8&#5$&H)3

1. The Miter Saw must be mounted on a support

before use. This may be a commercially

available support or home made saw table.

2. There are bolt holes provided in each of the

four legs of the base. These should be firmly

mounted using bolts (not included) to your

saw stand or saw table (not included).

3. This will help prevent tipping or movement of

the saw, preventing injury. Also, the use of a

saw table will make it easier to efficiently handle

work materials and make more accurate cuts.

Page 10 >"-&#$95<19)(&?2$+#1"<+@&,($)+$&9)((&ABCCCBCDDBEFGF/ ITEM 56708

HI>;JK LM;NIJOL! PIO!J;!I!Q;H;JRM

>182-$&I%&&Q":,"<$<#+

J-188$-

J-188$-&

U"9X

'()*$

U"3$-&

T2)-*

'$W$(&I<8($&

O<*19)#"-

>$<9$

H(1*1<8&

>$<9$

P1#$-&U"9X&

_)<*($

P1#$-&

_)<*($

P1#$-&I<8($&

O<*19)#"-

J)4($

S"-X,1$9$&

;Z#$<+1"<&

H2,,"-#

S"-X,1$9$&

;Z#$<+1"<&

H2,,"-#

Y$-7&

'")-*

V2+#&')8

Q():,

Indice

Altri manuali Chicago Electric Sega

Chicago Electric

Chicago Electric 98199 Manuale di installazione

Chicago Electric

Chicago Electric 90891 Manuale di installazione

Chicago Electric

Chicago Electric 61608 Manuale utente

Chicago Electric

Chicago Electric 42624 Manuale utente

Chicago Electric

Chicago Electric 97200 Manuale di installazione

Chicago Electric

Chicago Electric 68988 Istruzioni per il montaggio

Chicago Electric

Chicago Electric 14 Industrial Cut-off Saw 68104 Istruzioni per l'installazione

Chicago Electric

Chicago Electric 46737 Manuale utente

Chicago Electric

Chicago Electric 98089 Manuale di installazione

Chicago Electric

Chicago Electric 91995 Manuale di installazione

Chicago Electric

Chicago Electric 38941 Manuale elenco delle parti

Chicago Electric

Chicago Electric 61481 Istruzioni per il montaggio

Chicago Electric

Chicago Electric 42818 Manuale utente

Chicago Electric

Chicago Electric 68298 Manuale utente

Chicago Electric

Chicago Electric 94245 Manuale utente

Chicago Electric

Chicago Electric ITEM 69684 Istruzioni per il montaggio

Chicago Electric

Chicago Electric 97580 Manuale di installazione

Chicago Electric

Chicago Electric 91938 Manuale utente

Chicago Electric

Chicago Electric 3733 Manuale utente

Chicago Electric

Chicago Electric 36595 Manuale utente

Chicago Electric

Chicago Electric 94596 Manuale elenco delle parti

Chicago Electric

Chicago Electric 98194 Manuale di installazione

Chicago Electric

Chicago Electric 69078 Manuale utente

Chicago Electric

Chicago Electric Professional Series 60608 Manuale di istruzioni

Manuali Sega popolari di altre marche

RIDGID

RIDGID BS1400 Manuale utente

ATIKA

ATIKA BWS 400-2 Manuale utente

RGC

RGC FS20 Manuale utente

Makita

Makita M2300 Manuale utente

IMET Spa

IMET Spa BASIC 300 PLUS SHI Manuale utente

IMET Spa

IMET Spa SIRIO 370 AF-E Manuale utente

Optimum

Optimum OPTisaw CS 275 Manuale utente

Makita

Makita BPB180 Manuale utente

Stihl

Stihl MS 462 C-M Manuale utente

AEG

AEG TS 250 K Manuale utente

Meec tools

Meec tools 004665 Manuale utente

Makita

Makita LS1018L Manuale utente

Ryobi

Ryobi RCS1400 Manuale utente

DeWalt

DeWalt DCS391 Manuale utente

Sealey

Sealey SA72 Manuale utente

skilsaw

skilsaw SPT88 Istruzioni per il montaggio

Urrea

Urrea SI810 Dimensioni e guida di installazione

EINHELL

EINHELL BKG 210/1 Manuale utente