Chicago Pneumatic CP86500 Manuale utente

CP86300 / CP86500 / CP86750 / CP86100 - Instructions for lifting and lowering the table

www.cp.com

SAFETY INSTRUCTIONS

• Never exceed the rated capacity of the press.

• Keep unauthorised persons, particularly children, away from the work area.

• Do not introduce hands or any other part of the body in the work area.

• Always use ocular and facial protection.

• Never wear baggy clothes, ties, watches, rings, chains, etc. when using the

press.

• Long hair should be tied up.

• Prior to use, make sure the press is securely anchored.

• Use appropriate guarding to contain any pieces that may break or fly apart

when applying force.

• Use only press accessories having a capacity rating equal to or greater than

the capacity of the press.

• Verify lift cables are slack before pressing on the bolster.

• Avoid off-center loads.

• The V-blocks must be used in pair, not by piece!

• Only one person at a time should operate the press.

• The operator must wear protective cloth, gloves, safety helmet, shoes and

ear protector during operating.

• To avoid accidents, always be aware of any on-going work on the machine.

Also, always stay focused on the job to be done.

Page 1/2

WARNING

Lower lock pins

Table

Upper lock pins

Winch

Cable

Safety

8940174875 Rev.02 - 02/2017

CP86300 / CP86500 / CP86750 / CP86100 - Instructions for lifting and lowering the table

www.cp.com

Page 2/2

Lifting the table

•

WARNING

While lifting the table, the 2

lower lock pins must remain in position.

1. Remove the upper lock pins.

2. Lift the table using the winch and adjust the height of the

table to allow the positionning of the lock pins in the holes.

3. Insert the upper lock pins with the safety pins.

4. Remove and Insert the lower lock pins to a new position.

Insert the safety pins.

5. Always operate the winch in order to release tension

of the cables.

Caution

When using the press,

The cables must always be loose. The cables

must not carry any load.

Lowering the table

1. Remove and insert the 2 lower lock pins to a new

postion.

WARNING

While lowering the table, the 2

lower lock pins must remain in lock position.

2. Apply tension on the table using the winch and remove

the upper lock pins.

3. Lower the table using the winch and adjust the height

of the table to allow the positionning of the lock pins.

4. Insert the upper lock pins with the safety pins.

5. Always operate the winch in order to release tension

of the cables.

Caution

When using the press,

The cables must always be loose. The cables

must not carry any load.

INSTRUCTIONS FOR MOVING THE TABLE

Caution

Never lower or lift the table with a load, the table must be free of load.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Chicago Pneumatic Utensili elettrici

Chicago Pneumatic

Chicago Pneumatic CP611 Series Manuale utente

Chicago Pneumatic

Chicago Pneumatic CP 1210 Guida alla manutenzione e all'assistenza

Chicago Pneumatic

Chicago Pneumatic MS 690 Guida alla manutenzione e all'assistenza

Chicago Pneumatic

Chicago Pneumatic CP 1230 SPDR Guida alla manutenzione e all'assistenza

Chicago Pneumatic

Chicago Pneumatic AF LF 1/4 Manuale utente

Chicago Pneumatic

Chicago Pneumatic CP7600C Series Manuale utente

Chicago Pneumatic

Chicago Pneumatic CP7600xC Series Manuale utente

Chicago Pneumatic

Chicago Pneumatic CP3109-13AC Manuale utente

Chicago Pneumatic

Chicago Pneumatic CP826 Manuale utente

Chicago Pneumatic

Chicago Pneumatic CP7778 Series Manuale utente

Chicago Pneumatic

Chicago Pneumatic CP7829H Manuale utente

Chicago Pneumatic

Chicago Pneumatic CP826 Manuale utente

Chicago Pneumatic

Chicago Pneumatic CP797 Series Manuale utente

Chicago Pneumatic

Chicago Pneumatic PT052-T7000-I10S Manuale utente

Chicago Pneumatic

Chicago Pneumatic CP8848-2 Manuale utente

Chicago Pneumatic

Chicago Pneumatic CP7600 C Series Manuale utente

Chicago Pneumatic

Chicago Pneumatic CP86750 Manuale utente

Chicago Pneumatic

Chicago Pneumatic CP785 Series Manuale utente

Chicago Pneumatic

Chicago Pneumatic CP6613 Foglio di istruzioni

Chicago Pneumatic

Chicago Pneumatic CP86150 Manuale utente

Chicago Pneumatic

Chicago Pneumatic CP9964-71 Manuale utente

Chicago Pneumatic

Chicago Pneumatic Chicago Pneumatic CP8745 Manuale utente

Chicago Pneumatic

Chicago Pneumatic CP8609-B Foglio di istruzioni

Chicago Pneumatic

Chicago Pneumatic B15B Manuale utente

Manuali Utensili elettrici popolari di altre marche

AEG

AEG OMNI-JS Manuale utente

SIP

SIP 01533 Manuale utente

Ribimex

Ribimex PRS499 Manuale utente

3M Fiber Optic Connector Crimp Tool Manuale utente

Ryobi

Ryobi P524 Manuale utente

ROJEK

ROJEK FSN 300A Manuale utente

Kemper

Kemper 1740PRO Manuale utente

WABCO

WABCO OptiTire Manuale utente

EINHELL

EINHELL TE-MS 18/210 Li Manuale utente

Orgapack

Orgapack OR-T 85 Guida rapida

TOUGHCUT

TOUGHCUT Diamond 400 Manuale utente

Yaros

Yaros PB-3603 Manuale utente

Fein

Fein BSS 2.0 E Guida all'installazione

Baileigh Industrial

Baileigh Industrial SS-2725 Manuale utente

Milwaukee

Milwaukee 2674-20 Manuale utente

Fein

Fein BLs 1.6 Manuale utente

Princess

Princess Electric Multi Sharpener Manuale utente

FOREDOM

FOREDOM K.1050 Manuale