Chicago Pneumatic CP8006 Manuale utente
Cordless Worklight
Baladeuse sans-l
Arbeitslampe
AUS charger: 8940171490
EU charger: 8940171491
UK charger: 8940171492
US charger: 8940171493
Lightercord: 8940171494
Half / Full / ashing / OFF
Charging signal
Signal de charge
Ladesignal
CP8006
IP65
30 LEDS
2250 lux
WWW.CP.COM 8940171495 Rev: 01 (03-2013)
Lighting
Power Power Battery
Type Weight Power Mode Battery
Capacity Safety Charging
Time Working Time Charger input Lightersocket
Charger Input
Charger
Output
[Lux] [W] / [g] / [Ah] IP [h] [h] [V & Hz] [V] [V & A]
CP8006 2250
@ 50cm 9 Li-Ion 370
Half Power
Full Power
Flashing
2.2 65 3.5h 6
(Full Power)
AC 100~240V
50/60 Hz DC 12 V DC
5V-1A
CP8006
Declaration of conformity
We : CHICAGO PNEUMATIC Tool Co. 1800 Overview Drive Rock Hill, SC 29730 - USA
Declare that the product(s): Worklight
Machine type(s) : CP8006
Origin of the product : Taiwan
is in conformity with the requirements of the council Directives on the approximation of the laws of the Member States relating : to 2006/95/EC, 2004/108/EC and
2006/66/EC
Name and position of issuer : Bruno BLANCHET ( General Manager)
Place & Date : Saint-Herblain, 04/03/2013
Technical le available from EU headquarter. Bruno Blanchet General manager LLC CP Technocenter 38, rue Bobby Sands - BP10273 44800 Saint Herblain - France
Copyright 2013, Chicago Pneumatic Tool Co. LLC
All rights reserved. Any unauthorized use or copying of the contents or part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers and
drawings. Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability.
Disposal
• The disposal of this equipment must follow the legislation of the respective country.
• All damaged, badly worn or improperly functioning devices MUST BE TAKEN OUT OF OPERATION.
• Repair only by technical maintenance staff.
Safety Requirement:
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs withearthed (grounded) power tools.
Unmodied plugs and matching outlets will reduce risk of electric shock.
Avoid body contact with ear thed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord awayfrom heat, oil, sharp edges or moving
parts. Damaged or entangled Cords increase the risk of electric shock.
If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk
of electric shock.
WWW.CP.COM
1. 2. 3.
Indice
Altri manuali Chicago Pneumatic Luce da lavoro
