Chill Solutions CSXC-1 Manuale utente
CSXC-1 Wall Mount
Installation Guide
This kit will allow you to
mount your CSXC-1 chiller
on any appropriate surface.
Please read all
instructions before
attemping to install
and enlist the help of a
professional if you are
unsure about any part of
the installation procedure.
Chill Solutions is not
responsible for damage
resulting from improper
installation
Components included in the mounting kit:
- [1x] Base Bracket
- [2x] Stainless Bolts
- [2x] Drywall Anchors
- [2x] Stainless Screws
1
2
3
4
1
2
3
4
Using the bracket ( ), or
printable template on page
3 of this manual as a guide,
make a mark on the wall for
each outer screw hole.
1
Screw drywall anchor ( )
into the wall at both marked
locations. Ensure anchors are
screwed in completely and sit
flush. (Skip this step if not
mounting to drywall)
2
Attach the bracket ( ), to
the CSXC-1 base using two
stainless steel bolts ( ).
Don’t overtighten!
3
1
3
1
2
Using two stainless steel
screws ( ), attach the chiller/
bracket to the wall. The
screws should thread directly
into the drywall anchors (if
attaching unit to drywall) if
moutning to wood or other
sturdy material the bracket
can be attached directly with
screws.
4
4
IMPORTANT:
The chiller can be installed in
any orientation.
DO NOT install inside a sealed
cabinet! The unit needs adequate
ventilation to work properly.
mounting holes
(4.8” apart)
Altri manuali Chill Solutions Refrigeratore
