User Guide
5
FiveButtonHandControl
Thefivebuttonhand control has the same function buttons as the three
buttonhandcontrolwiththeadditionofatraversingfunction.
The traversing function is controlled by the red buttons, on the handset. The
buttons are colour coded with a solid red arrow and an outline red arrow.
These colours correspond to the direction travel arrows on the underside of
the hoist case.
To control the direction of the hoist, view the coloured direction arrows
mounted on the hoist and press the button on the hand control which
corresponds in colour to the arrow on the hoist.
The reset button is the red button in the top right hand corner on the handset.
It resets the hoist for normal operation e.g after an alarm signal (refer to
troubleshootingsectiononpage8).
SevenButtonHandControl
Thesevenbuttonhandcontrolhas the same function buttons as the five
buttonhand control, with the addition ofthe tracking for the X-Y system.
The tracking X-Y function is controlled by the blue buttons, on the handset.
The buttons are colour coded with a solid blue arrow and an outline blue
arrow. These colours correspond to the direction travel arrows on the
underside of the hoist case.
To control the direction of the hoist, view the coloured direction arrows
mounted on the hoist and press the button on the hand control which
corresponds in colour to the arrow on the hoist.
The reset button is the red button in the top right hand corner on the handset.
It resets the hoist for normal operation e.g after an alarm signal (refer to
troubleshootingsectiononpage8).
Emergency Stop
Thered pull cord provides an
emergency cut out. If the cord
is pulled once then the
emergency stop is activated.
To reset, pull the short piece of
cord located on the top face of
thehoist.Proceedto press the
redresetbuttonlocatedonthe
handset.Threebeepssound
when the hoist is then reset and
readytouse.
Fig1.
