Never open the housing of the device. Failure to do so could
cause a potentially fatal electric shock.
Repair work is required if the device was dropped or has been damaged in any way, for
example, if the device housing was damaged, liquid or objects penetrated the device
interior, or if it was exposed to rain or moisture. Repairs are also required if the device
does not work properly.
If smoke, unusual noises or odors are detected, immediately switch off and unplug the
device from the power source. If this occurs, do not continue to use the device and have it
checked out by a qualified person. All repair work must be carried out by qualified
personnel.
Disconnect the device from the power source before cleaning.
There is a risk of electric shock.
Only use a clean, dry cloth for cleaning. Never use any corrosive liquids (alkalis, acids,
thinners, solvents, etc.).
Place of installation and operating environment
The following measures support the proper functioning of the device and extend its service life:
•Only position the device on a stable, flat surface and do not place any objects on the
device. The device is not suitable for use in rooms with high temperature or humidity
(e.g., bathrooms) or with high levels of dust (e.g., workshops).
•The device is very large and heavy. It must only be placed on fitted furniture which is
sufficiently strong to support it. The furniture must be wide enough so that the device
does not protrude beyond the edges of the furniture. Alternatively, it can be wall
mounted. For this purpose, use a suitable mounting frame and follow the
recommendations of the manufacturer.
•Operating temperature and humidity: 5 ºC to 35 ºC, max. 80 % RH.
•Make sure that the air circulates freely (do not place the device on shelves, on a thick
carpet or bed, or anywhere, where the ventilation slots would be obstructed. Leave at
least 10 cm clearance on all sides).
•Do not expose the device to direct heat sources (e.g., heaters).
•Do not expose the device to direct sunlight or bright artificial light.
•Avoid contact with water sprays or drips and aggressive fluids. Never operate the
device near water. In particular, the device must never be immersed. Do not place any
containers containing liquid such as drinks, vases, etc. on or next to the device.
•Never place the device near magnetic fields (e.g., loudspeakers).
•CAUTION! Always keep candles and open flames away from this product to avoid the
risk of fire.
•Do not allow foreign bodies to penetrate the device.
•Do not subject the device to significant temperature fluctuations, as this can cause
condensation and short-circuits.
•Do not subject the device to excessive shocks or vibrations.
•Only connect the TV set to a properly installed, easily accessible power socket whose
voltage corresponds to that on the type plate.
