Choetech BH-T09 Manuale utente
Solar Energy TWS
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch
2
English
3 –12
Čeština
13 –22
Slovenčina
23 –32
Magyar
33 –42
Deutsch
43 –52
3
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before
first use and keep this user manual for future reference. Pay particular attention to the safety
instructions. If you have any questions or comments about the device, please contact the
customer line.
✉www.alza.co.uk/kontakt
✆+44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
4
Product overview
Choose the ear cap that suits you.
First time using
1. Tear off the
insulating film.
2. Put the earbuds into the
charging case and close the
lid to charge (the earbuds
are in charging state.
3. Open the cover of the charging case
and they will turn on and pair
automatically and will be prepared for
pairing to the phone (the indicator will
turn to red and blue alternately).
Warming notice: If earbuds are not turned on or there is no sound come out, please put the
earbud back into the charging case and close the lid again, make sure that earbuds are in
the charging state before opening the lid and taking out them to use (red/blue light flash
alternately).
Red & Blue flash
Solar Charging Panel
MFB Power Switch
Magnetic Contacts
Charging Indicator of Left Earbud
Charging Indicator of Right Earbud
Indicator Light of Charging Case
Earbud Cap
Microphone
5
4. The indicator of one earbud will go off and another will flash
red and blue light alternately (in pairing mode).
5. Turn on the Bluetooth function on your phone and search for
(BH-T09) and connect it.
Warm notice:
If indicators of both earbuds keep flashing red and blue, click either earbud’s power switch
twice. Then the indicator of one earbud will flash red and blue alternately, another will go off
(in pairing mode).
If you want to switch the Bluetooth connection to another device, please disable the Bluetooth
function in the previously connected device or delete the pairing name of “BH-T09” from the
original device. Then the pairing name of “BH-T09” can be searched in new device and
connected successfully.
Button control
Power on:
The earbuds will automatically turn on after opening the top lid of the charging case. Press
and hold the power switch for 5s then leave hold, the earbuds will turn on (not in the charging
compartment and is in the off state).
Power off:
Put the earbuds into the charging case and close the lid, they will automatically shut down.
While in the non-working state, press and hold the power switch for 5s, the two earbuds will
be turned off at the same time. Automatically shut down after not connected for more than 5
minutes.
Accept: L/R Earbud
Decline: L/R Earbud
Reject: L/R Earbud
Voice assistant:
L/R Earbud
Previous track:
L Earbud
Next track:
R Earbud
Indicator off
6
Volume: L Earbud
Volume+: R Earbud
Play/Pause:
L/R Earbud
Warm notice
For any single earbud, when it is in standalone mode, you can’t use it to play the previous
song or decrease the volume.
Siri and other voice assistant
iOS and part of the Android users can triple click the left or
right power switch to turn on the voice assistant.
The voice assistant will be automatically activated depends
in different OS in mobile system.
Restore factory setting
1. When the earbud is on with mobile phone unconnected
click the left and right power switch simultaneously four
times quickly. The red and blue lights will be on for 2
seconds and then it will clear its memory and the earbuds
will shut down.
2. Please delete all paired records on the phone and search
again for “BH-T09” on the Bluetooth of mobile phone and
reconnect.
L/R Earbud
L/R Earbud
Earbuds indicator
Charging for earbuds
Charging
Full battery
7
Status: Light
Turn on: Blue light flashes for 1 second then the red and blue light flash alternately
Turn off: Red light goes out after flashing for one second
Search earbuds: Red and blue light flash alternately
The earbuds connect successfully: After successful pairing, the light of the main ear
flashes alternately in red and blue
Connect with mobile phone successfully: Blue light of both earbuds flash once
circularly every 6s
Music play: No light
Low battery: Red light of earbud flashes once every 6s
Charging: Red light on
For battery: Red light off
Status: Light
L earbud in charging state: Charging indicator of L earbud turn white
L earbud in full battery state: Charging indicator of L earbud off
R earbud in charging state: Charging indicator of R earbud turn white
R earbud in full battery state: Charging indicator of R earbud off
Charging case in low battery state: When opening and closing the lid, the left and right
white lights flash three times at the same time and then go off
Charging case in charging state: Red light flashes
Charging case in full battery state: Red light keeps on
Steps of charging for earbuds:
Put the earbud in the charging case, and
the lid must be closed to charge it. They will
automatically turn off and disconnect when
the charging case lid is close.
Charging case indicator
Indicator Light of charging case
Charging indicator of right earbud
Charging indicator of left earbud
8
Charging case
Please use a charger with an output with an output voltage of DC5V/1A to charge the
charging case. You can also use a computer USB or other USB interface charger to charge
(must choose a charger certified by a regular manufacturer).
Solar energy
Charging under the sun. Solar charging case in the sun without AC
power, direct conversion of sunlight energy into DC electrical energy
for charging. This is a necessary companion for people who love to
travel, outdoor sports people and business workers. And it can
completely eliminate the lack of power, power outages, outdoor
activities occasionally run out of batter trouble.
Specifications
Version:
v5.3 + EDR
Support:
HFP, HSP, A2DP, AVRCP
Transmission distance:
10 m
Frequency range:
2.402 GHz~2.480 GHz
Speaker:
8 mm * 2
Impedance:
16 Ω
Standby time:
60 hours
Talk time:
4 hours
Playing time:
4 hours
Earbud battery capacity:
40 mAh
Fully charged time:
1 hour
Charging case battery capacity:
600 mAh
Charging time of charging case:
About 1.5 hours
Weight (single earbud):
4.0 g
9
Notice:
1. If the charging case is out of power, it may cause the earbuds to fail to shut down and
remain connected to the phone even when they are placed in the charging case. So
please remember to charge the charging case in time.
2. If there is noise, broken sound, or low sound, please take off the silicone ear cap and
wipe it with a cotton swab.
3. If the earbud is not charged properly, wipe the charging column with a cotton swab, and
then charge it again.
Attentions
Please make sure that the products are dry. If there is water droplet on the surface, please
wipe it with a dry cloth before putting them back into the charging case to avoid damaging
the device.
1. Do not use corrosive liquid to clean this product.
2. If it comes into contact with chemicals, please rub it with a damp cloth wet with
clean water.
3. Do not use this product under extreme circumstances for temperature below -10˚C or
above 60˚C.
4. To avoid explosion, please do not throw this product into fire.
5. To avoid scratches, please do not touch the earbuds, with sharp objects.
6. Do not insert objects into the earbuds, otherwise it would cause damage to the internal
components.
7. Do not disassemble the earbud.
8. Please keep regular charge to earbuds, don’t leave them become empty battery status to
keep their lifetime.
9. Please do not charge products with power adapter over 2 A current. Excessive current
may cause the damage to battery.
Battery WARNING!
There is a built-in lithium battery in this product. To avoid explosion, do not
expose the product to strong sunlight, fire or throw it into fire.
For FAQs and more information, please visit: Choetech/support
10
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need
repair or other services during the warranty period, contact the product seller directly, you
must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which
the claimed claim may not be recognized:
Using the product for any purpose other than that for which the product is intended or
failing to follow the instructions for maintenance, operation, and service of the product.
Damage to the product by a natural disaster, the intervention of an unauthorized person
or mechanically through the fault of the buyer (e.g., during transport, cleaning by
inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as batteries,
etc.).
Exposure to adverse external influences, such as sunlight and other radiation or
electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic
discharge voltage (including lightning), faulty supply or input voltage and inappropriate
polarity of this voltage, chemical processes such as used power supplies, etc.
If anyone has made modifications, modifications, alterations to the design or adaptation
to change or extend the functions of the product compared to the purchased design or
use of non-original components.
Indice
Lingue:
