Chord DAVE Manuale utente

Chord Electronics

Product Communication | English

The Pumphouse, Farleigh Lane, East Farleigh, Kent, ME16 9NB, Great Britain.

+44 (0) 1622 721444

info@chordelectronics.co.uk

chordelectronics.co.uk

DAVE

Manual

V.1.1

Chord Electronics

DAVE | Manual

2 // 35

Contents 0.0

1.0 Safety instructions 03

1.1 Introduction 04

1.2 Protection against liquids & heat 05

1.3 Dismantling & radio 06

frequency interference

1.4 Connecting your equipment 07

2.0 Warranty 08

2.1 Warranty period & registering 09

your purchase

2.2 Making a claim & warranty exclusions 10

0.0 Contents

3.0 Getting to know DAVE 11

3.1 Getting to know DAVE 12

3.2 The front panel 13

3.4 The rear panel 14

3.5 The remote control 15

4.0 Setting up DAVE 16

4.1 Placement 17

4.2 Connecting your source to 18

DAVE

4.3 Connecting a BLU MK II or

Hugo M Scaler to DAVE 19

4.4 Connecting a preampliﬁer/

ampliﬁer to DAVE 20

4.5 Powering DAVE 21

5.0 How to navigate the menus 22

5.1 The screen & navigating the menu 23

5.2 Sample rate 24

6.0 Playback modes 25

6.1 Playback modes 26

6.2 Headphone mode 27

6.3 Preampliﬁcation mode 28

6.4 DAC mode 29

7.0 Playback modes 30

7.1 DSD and PCM mode 31

7.2 Crossfeed 32

7.3 Settings memory & galvanic isolation 33

7.4 Display messages 34

Chord Electronics

DAVE | Manual

1.1 Introduction

1.2 Protection against liquids & heat

1.3 Dismantling & radio frequency interference

1.4 Connecting your equipment

1.0 Safety

instructions

Safety instructions 1.0

3 // 35

Chord Electronics

DAVE | Manual

4 // 35

Introduction 1.1

DAVE is an incredibly

powerful and versatile

digital-to-analogue

convertor preampliﬁer and

headphone ampliﬁer.

Before operation, we strongly

advise you read this user manual

thoroughly.

We also recommend that you

store this user manual, along with

your original receipt of purchase,

in a safe place should you require

assistance in the future.

1.1 Introduction

1.2 Protection against

liquids & heat

1.3 Dismantling & radio frequency

interference

1.4 Connecting your equipment

Chord Electronics

DAVE | Manual

Protection against

liquids & heat

1.2

DAVE is not protected

against liquids of any

kind. Never place

containers of liquid on DAVE.

Never allow DAVE to come

into contact with moisture or

liquids; doing so could result

in electrocution or damage to

DAVE’s internal circuitry.

Be aware that liquids, including

water that has dried, can leave

minerals that can aect the

PCB and other components,

which could eventually lead to

oxidisation and short-circuiting.

If DAVE comes into contact

with moisture or liquids,

immediately disconnect from

the power supply and connected

equipment, and contact Chord

Electronics for further advice.

DAVE has internal

thermal protection

which will shut down

the unit in the event of excessive

temperatures being reached.

Never operate DAVE near

sources of heat or naked ﬂames

as this will decrease the lifespan

of the internal components.

It is advised that you do not

operate DAVE in an area of direct

sunlight or on top of signiﬁcant

heat-producing devices.

Please be aware that it is entirely

normal for DAVE to become

warm during use.

If you are concerned about the

temperatures, please switch the

device o or consider a dierent

placement.

1.1 Introduction

1.2 Protection against

liquids & heat

1.3 Dismantling & radio frequency

interference

1.4 Connecting your equipment

5 // 35

Chord Electronics

DAVE | Manual

6 // 35

There are no user-

serviceable components

within DAVE or its power

supply. Dangerous voltages/

currents exist within DAVE and

its power supply, posing a severe

risk of electrocution and/or ﬁre.

Never attempt to

open, dismantle or

apply internal third-

party devices to it or insert

anything other than the listed

interconnects or headphone

adapters within this user manual.

If DAVE develops a fault or the

casework becomes damaged,

immediately disconnect from

the power supply and connected

equipment, and contact Chord

Electronics for further advice.

1.1 Introduction

1.2 Protection against

liquids & heat

1.3 Dismantling & radio frequency

interference

1.4 Connecting your equipment

Dismantling & radio

frequency interference

1.3

With a thick, solid aluminium

chassis, DAVE’s casework

largely protects the sensitive

internal circuitry from radio

frequency interference. However,

for optimal performance, it is

recommended that the following

points are observed:

1. Consider placing DAVE away

from wireless routers.

2. Separate DAVE from

ampliﬁers using toroidal

transformers.

3. Operate mobile phones at

a distance to avoid

interference.

Although the unit is

largely shielded, it

can generate radio

frequency interference that

may have an eect on analogue

radio and television reception.

Please consider moving DAVE to

a dierent location should this

happen.

Chord Electronics

DAVE | Manual

Before connecting DAVE to any

third-party equipment, consult

the manufacturer’s user guide to

conﬁrm compatibility.

When connecting DAVE to any

equipment, make sure that all

devices are o, including DAVE.

Once connected, switch all

equipment on starting with

the source and ending with the

ampliﬁcation.

Initially, operate DAVE on its

lowest volume setting, gently

increasing to a comfortable

listening level.

Never operate DAVE at excessive

volume levels; permanent hearing

damage and/or loss can occur.

DAVE does not have internal

batteries and, therefore, must

be permanently connected to a

source of power.

The included 10-amp IEC power

cable plugs into DAVE.

Do not disconnect DAVE from

the power cable without ﬁrst

switching the unit o to avoid

any damage.

1.1 Introduction

1.2 Protection against

liquids & heat

1.3 Dismantling & radio frequency

interference

1.4 Connecting your equipment

Connecting your equipment 1.4

Never disconnect the

power cable during

operation. Only

disconnect when DAVE

is o. If the power cable

is disconnected during

operation, there is a risk

of damage to connected

equipment.

7 // 35

Chord Electronics

DAVE | Manual

2.1 Warranty period & registering your purchase

2.2 Making a claim & warranty exclusions

2.0 Warranty

Warranty 2.0

8 // 35

Chord Electronics

DAVE | Manual

9 // 35

2.1 Warranty period & registering

your purchase

2.2 Making a claim & warranty

exclusions

Warranty period & registering

your purchase

2.1

At point of sale, Chord

Electronics Ltd. provides DAVE

with a comprehensive ﬁve-year

warranty* which covers defects

in materials and workmanship

through fair wear and tear. The

warranty will be void if any other

PSU other than that supplied is

used.

*The warranty is transferable

with proof of purchase, however,

warranty on ex-demonstration

units begins from the retailer‘s

date of purchase.

Please use the form

below to record the

details of your purchase

in the event that these are

required at a later date. We

further advise that all purchases

are registered with Chord

Electronics at: chordelectronics.

co.uk/register-product/

RETAILER:

PURCHASE PRICE:

UNIT COLOUR:

DATE OF PURCHASE:

TRANSACTION ID:

Chord Electronics

DAVE | Manual

In the unlikely event of a claim,

your ﬁrst point of contact should

be your supplying dealer. If

this is not possible, you must

provide Chord Electronics with

the details of the claim, including

your original proof of purchase

and serial number, in order to

validate the nature of the repair.

Upon receipt, Chord Electronics

will make an assessment within

30 days and provide a reasonable

solution.

All warranty repairs must be

carried out by Chord Electronics

or an approved service centre, to

guarantee the quality and safety

of the repair.

WARRANTY EXCLUSIONS: The

warranty does not cover connected

equipment, personal injury or

development natural patina of the

metalwork and will be null and void

if the following is applied: wilful

neglect; modiﬁcation or tampering

of the product; improper use of the

product; acts of God; damage caused

by a connected device; mechanical

shock; ﬁre or application of excessive

heat or repair/modiﬁcation by a non-

authorised third-party vendor.

2.1 Warranty period & registering

your purchase

2.2 Making a claim & warranty

exclusions

Making a claim

& warranty exclusions

2.2

10 // 35

Altri manuali per DAVE

Indice

Altri manuali Chord Amplificatore

Manuali Amplificatore popolari di altre marche

ASTRO

ASTRO HVO V40 P Manuale utente

Marantz

Marantz SUPERSCOPE BLA-545 Istruzioni per il montaggio

NAD

NAD CI980 Manuale utente

Technics

Technics SE-CH770 Manuale utente

Harman Kardon

Harman Kardon HK6300 Manuale utente

NAD

NAD T975 Manuale utente

McIntosh

McIntosh MA6850 Manuale utente

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manuale utente

Viatron

Viatron Autrix Manuale utente

GME

GME GA9800 Manuale utente

Atlas

Atlas CP700 Manuale utente

Roland

Roland KC-1000 Manuale utente

Pyle

Pyle PFMRA350BW Manuale utente

Advantage

Advantage S-250 Manuale utente

IRT Electronics

IRT Electronics DVA-3007 Manuale utente

Dimavery

Dimavery BA-100 Series Manuale utente

Sony

Sony XM-S400D Manuale utente

Schertler

Schertler ROY X Manuale utente