Chord 2go Manuale utente
Chord Electronics
Product Communication | English
The Pumphouse, Farleigh Lane, East Farleigh, Kent,
ME16 9NB. Great Britain.
+44 (0) 1622 721 444
info@chordelectronics.co.uk
chordelectronics.co.uk
2go
Manual
-
V.1.0
Chord Electronics
2go | User manual
2
1 Content
1 Introduction 3
2 Registering 2go 4
3 Updating 2go 4
4 Product description 5
5 Charging 2go 8
6 Connecting 2go to Hugo 2 9
7 Powering on 2go 10
8 GoFigure app – Configuration 11
9 Configuration menu 13
10 Connection methods 14
11 Audio playback 17
12 Manual configuration 20
13 Browser configuration 23
14 GoFigure app – Extra features 25
15 Technical Specifications 27
Chord Electronics
2go | User manual
3
2 Introduction
This user manual is intended for 2go users. It contains all the information necessary to safely and
successfully use 2go and consists of two sections:
•The user manual describes 2go and provides the essential user instructions.
•The extended manual contains information that is not directly related to everyday use.
2.1 Safety
Please take note of the following safety instructions before using 2go:
•Never allow 2go to come into contact with water or other liquids.
•Never spray cleaner onto 2go. Only use a clean microfibre cloth to clean the casing.
•Before using this product you must read the safetly document included in the box.
2.2 Warranty
2go comes with a comprehensive 3 year warranty. To activate this warranty, please register your 2go via
the Chord Electronics website: www.chordelectronics.co.uk/register-product
Chord Electronics
2go | User manual
4
3 Registering 2go
2go comes with a three-year warranty
that covers defects in materials and
workmanship through fair wear
and tear.
•Register your 2go via the Chord Electronics website: www.chordelectronics.co.uk/register-product
•We recommend you register your product as it’s the first important step in protecting your
investment and helps us to provide you with the best possible after-sales support.
4 Updating 2go
New firmware is periodically issued to guarantee high performance and introduce new features to 2go.
These updates can be found in the GoFigure app.
1. In the Settings tab 4of the GoFigure app, press Device Settings.
2. Press Firmware Update and select the update you wish to install.
2go can also be updated via manual configuration:
•Select “Firmware update” by pressing the Configuration button B(see chapter 9).
NOTICE The GoFigure app will not actively notify you of new updates. Check the app regularly to
keep your 2go up to date.
NOTICE Updates can only be downloaded when 2go is connected to a network with internet access.
Chord Electronics
2go | User manual
5
5 Product description
2go is a portable music streamer and player. Combined with Hugo 2, it can wirelessly stream from
connected devices and play back audio via Roon, AirPlay or from a Micro SD card, all with smartphone
control. 2go provides access to hi-fi sound quality at home or on-the-go, via Wi-Fi, Bluetooth or LAN.
5.1 Main parts
Please take a moment to familiarize yourself with 2go’s main parts:
ABD
CEFJK L O
MN
G H
ALocking hex screw FCharge status LED LUSB cable
BON/OFF / Configuration button GMicro USB charging port MConnector pins
CNetwork status LED HMicroSD slot (left) NAllen wrench
DEthernet port JMicroSD slot (right) OEthernet cable
E2go status LED KWi-Fi / Bluetooth antenna
Chord Electronics
2go | User manual
6
5.2 Status LEDs
2go uses three LEDs to communicate feedback:
• 2go status LED E
• Network status LED C
• Charge status LED F
These LEDs emit various colours to communicate 2go’s status:
2go status LED Network status LED
Flashing
2go is in Hotspot mode and is available as
a Wi-Fi connection for an external device.
Flashing
2go is searching for a known Wi-Fi
network.
Flashing
2go has successfully read the inserted
MicroSD card. 2go has established a Wi-Fi connection.
Flashing
2go cannot read the inserted MicroSD
card.
2go has established an Ethernet
connection.
Flashing
2go has successfully paired via Bluetooth. 2go is booting.
Flashing fast
Refreshing SD card database.
Flashing slowly
2go is updating its firmware.
2go is charging.
Chord Electronics
2go | User manual
7
5.3 Battery level
When 2go is switched on, the charge status LED Fwill glow in 1 of 4 colours to indicate the battery
level:
Flashing
Charging 100-75% 75-50% 50-25% 25-5% 5-0%
NOTICE The microprocessor remains active when 2go is switched o. This causes the battery to
slowly empty over time.
TIP The battery level is also displayed in the Home menu of the GoFigure app (see chapter 6).
5.4 Audio playback
2go can play back audio from the following sources:
•DLNA
– As a server
– Tidal (via Gofigure)
– Qobuz (via Gofigure)
•Internet radio (via Gofigure)
•MPD
•Bluetooth Audio (A2DP)
•Roon
•Airplay
•MicroSD cards (Up to maximum
capacity 4TB)
Chord Electronics
2go | User manual
8
6 Charging 2go
2go can be charged with the provided USB cable Lor the charger supplied with Hugo 2. It takes
about 5 hours to charge 2go. 2go and Hugo 2 can be charged simultaneously, with a charge time of
about 8 hours.
NOTICE When using a dierent charger, make sure it can supply at least 1A to charge 2go. To charge
2go and Hugo 2 simultaneously, an input of at least 2A is required. Using a 1A charger to charge both
devices simultaneously will result in only Hugo 2 being charged.
TIP We recommend that you fully charge 2go before using it for the first time.
TIP 2go can be charged while playing back audio, but this increases the charging time.
To charge 2go:
1. Insert the USB cable Lor Hugo 2 charger into the Micro USB charging port G.
2. Insert the other end of the USB cable Lor Hugo 2 charger into a suitable power outlet or adapter.
2go will start to charge and the charge status LED Fand 2go status LED Ewill emit a solid white
light.
Chord Electronics
2go | User manual
9
7 Connecting 2go to Hugo 2
To connect 2go to Hugo 2:
1. Screw the connector pins Minto
the front of Hugo 2 until finger tight.
NOTE: please do not over-tighten as this
will damage your Hugo 2
2. Gently attach 2go to Hugo 2.
3. Tighten 2go’s locking hex screws
Awith the provided Allen wrench
N.
4. If your two devices are not
connecting with ease, please slightly
loosen the connector pins half a turn
and re-join the two devices
NOTICE
Chord Electronics
2go | User manual
10
8 Powering on 2go
To power on 2go:
1. Attach 2go to Hugo 2 (see chapter 4).
2. Press and hold the ‘config’ button Bfor 2 seconds.
or
3. Press and hold the power button of Hugo2 until the buttons start to glow. 2go will now automatically
switch on.
4. Wait approximately 15 seconds. The Network status LED Cwill remain Orange whilst booting up
(please wait). When fully booted the LED will then show the current network status (see section 2.2).
TIP We recommend using a 2go case to protect the connection between the two devices.
8.1 Powering o
To power o 2go:
1. Press and hold the ‘config’ button Bfor 5 seconds.
or
2. Press and hold the power button of Hugo 2. This switches both devices o.
3. Wait 20 seconds for 2go to power o.
Altri manuali per 2go
1
Indice
Altri manuali Chord Sintonizzatore TV
