Christ Elektronik Touch-it CE Manuale utente
Touch-it CE
Operating Instructions
www.christ-elektronik.de Tel.: +49 8331 8371-0
Touch-it CE
Low Power Panel PC
Different Housings
Sizes From 7” to 15”
Ready For Use
Touch-it CE
Operating Instructions
www.christ-elektronik.de Tel.: +49 8331 8371-0
Document No.
E461131
Revision
10
Date
28 Apr. 15
Address
Christ-Elektronik GmbH
Alpenstraße 34
DE-87700 Memmingen
Telephone
+49 (0)8331 8371 –0
Fax
+49 (0)8331 8371 –99
E-Mail
Internet
http://www.christ-elektronik.de
Copyright
No part of this documentation may in any form be reproduced, copied or
distributed by means of electronic systems without previous written permis-
sion by Christ-Elektronik GmbH. The translation into another language also
requires a written permission. This documentation may be exclusively en-
trusted to the owner of the installation or to the employees of Christ-
Elektronik GmbH.
Technical chang-
es
Christ-Elektronik GmbH reserves the right to change specifications, execu-
tions and technical data held within this document without prior notice.
Trademarks
Brand and product names are trademarks or registered trademarks of their
respective owners.
Touch-it CE
Operating Instructions
www.christ-elektronik.de Tel.: +49 8331 8371-0
Table of Contents
Page
1General ..............................................................................................................................................4
2Commissioning ................................................................................................................................7
2.1 Mounting.................................................................................................................................................... 7
2.1.1 Touch-it CE Open Frame ........................................................................................................7
2.1.2 Touch-it CE Front Panel ..........................................................................................................8
2.1.3 Touch-it CE VESA ..................................................................................................................9
2.2 Interfaces Connector Side ................................................................................................................. 10
3Software .........................................................................................................................................11
3.1 Microsoft Windows Mobile Device Center / Active Sync..................................................................... 11
3.2 General Information ................................................................................................................................ 13
3.2.1 Exploring the different interfaces that Windows CE offers .........................................................13
3.2.2 PC Connectivity over Ethernet ...............................................................................................14
3.2.3 Compilation / Debugging ....................................................................................................15
3.3 Flash Memory Layout............................................................................................................................... 17
3.4 Permanent Storage .................................................................................................................................. 18
3.4.1 Flash Disk ..........................................................................................................................19
3.4.2 MicroSD Card ....................................................................................................................19
3.4.3 USB HD .............................................................................................................................19
3.5 Registry .................................................................................................................................................... 20
3.6 Windows CE 6.0/ EC 7 Bootloader & Image Update.......................................................................... 21
3.6.1 Image Update via external memory (USB, SD).........................................................................21
3.6.2 Image Update via terminal connection ...................................................................................22
3.7 Running Applications at Startup (Autorun) ............................................................................................. 23
3.8 Adding Files to Desktop or Start Menu (AutoCopy)............................................................................... 23
3.9 Touch-it CE remote control ...................................................................................................................... 24
4Interfaces .........................................................................................................................................26
4.1 Power Supply Connector.................................................................................................................... 26
4.2Ethernet Connector ............................................................................................................................. 26
4.3 CAN Connector.................................................................................................................................... 27
4.4 COM1 (RS-232)...................................................................................................................................... 27
4.5 COM1 (RS-232, Touch-it CE Codesys) .............................................................................................. 28
4.6 COM2 (RS-485, Touch-it CE Codesys) .............................................................................................. 28
4.7 COM2 (RS-232 or RS-485) .................................................................................................................... 29
4.8 USB Type A ............................................................................................................................................. 30
4.9 USB Mini Type B Extern ......................................................................................................................... 30
4.10 Connector ............................................................................................................................................. 31
4.11 MircoSD .................................................................................................................................................. 31
4.12 I/O Connector ...................................................................................................................................... 32
5Pointers ...........................................................................................................................................33
5.1 Used symbols........................................................................................................................................... 33
5.2 General pointers...................................................................................................................................... 33
5.3 Safety pointers ...................................................................................................................................... 34
5.4 Maintenance plan ............................................................................................................................... 35
5.5 Repairs .................................................................................................................................................... 35
5.6 Cleaning ................................................................................................................................................ 36
Touch-it CE
Operating Instructions
www.christ-elektronik.de Tel.: +49 8331 8371-0
1 General
OVERVIEW
Series
Touch-it CE
Housing
Open Frame
Open Frame glass
Front Panel
Front Panel glass
VESA
VESA glass
Touch
Foil Touch, analog resistive
Projected Capacitive Touch
Sizes (Display)
7” –15”
CPU
NVIDIA® Tegra™ 2 T20 Dual Core 1.0 GHz Cortex-A9
NVIDIA® Tegra™ 3 T30 Quad Core 1.4 GHz Cortex-A9
Touch-it CE
Operating Instructions
www.christ-elektronik.de Tel.: +49 8331 8371-0
SYSTEM
CPU
NVIDIA® Tegra™ 2 T20 Dual Core 1.0 GHz Cortex-A9
Graphic
Integrated Ultra-low power NVIDIA GeForce GPU
Video Decoder
H.264, WMV9 VC-1, MPEG-4, MPEG-2, H.263, DiVX, XviD
Memory
256 MB DDR2 RAM
512 MB DDR2 RAM (optional)
Storage
512 MB NAND FLASH
1 GB NAND FLASH (optional)
Operating System
Windows Embedded Compact 7 Pro
Linux (optional)
SYSTEM
CPU
NVIDIA® Tegra™ 3 T30 Quad Core 1.4 GHz Cortex-A9
Graphic
Integrated Ultra-low power NVIDIA GeForce GPU
Video Decoder
H.264, WMV9 VC-1, MPEG-4, MPEG-2, H.263, DiVX, XviD
Memory
1 GB DDR3 RAM
Storage
4 GB NAND FLASH
MicroSD
Operating System
Windows Embedded Compact 7 Pro
Linux (optional)
POWER SUPPLY
Supply Voltage
24 VDC ± 20%
Power Consumption
See specific datasheet
Power Switch
No
Touch-it CE
Operating Instructions
www.christ-elektronik.de Tel.: +49 8331 8371-0
MECHANICAL & ENVIRONMENTAL
Open Frame
Open Frame glass
Housing Front
Without Frame
Without Frame
Housing
Stainless Steel
Stainless Steel
Cooling
Passive
Passive
Protection Class
IP20
IP20
Operating Temperature
0 ~ 50 °C
0 ~ 50 °C
Front Panel
Front Panel glass
Housing Front
Aluminium frame /
naturally anodized
Glass, black frame
Housing
Stainless steel
Stainless steel
Cooling
Passive
Active
Protection Class
IP20 (IP 65 front)
IP20 (IP 65 front)
Operating Temperature
0 ~ 50 °C
0 ~ 50 °C
VESA
VESA glass
Housing Front
---
Glass, black frame
Housing
Aluminium / anodized silver,
chemically shined
Aluminium / anodized silver,
chemically shined
Cooling
Passive
Passive
Protection Class
IP20 (IP 65 front)
IP20 (IP 65 front)
Operating Temperature
0 ~ 50 °C
0 ~ 50 °C
Dimensions
See specific datasheet
Weight
See specific datasheet
Storage Temperature
-10 ~ 70 °C
Humidity
5 ~ 80% (non condensing)
Certification
CE, EN55022, EN55024, DIN EN ISO 9001
Touch-it CE
Operating Instructions
www.christ-elektronik.de Tel.: +49 8331 8371-0
2 Commissioning
2.1 Mounting
2.1.1 Touch-it CE Open Frame
The variant Touch-it CE Open Frame is designed for customer specific mounting.
Each Open Frame Panel has its own cut-out drawing.
For example:
For the appropriated drawing see the specific data sheet.
Touch-it CE
Operating Instructions
www.christ-elektronik.de Tel.: +49 8331 8371-0
2.1.2 Touch-it CE Front Panel
The variant Touch-it CE Front Panel is designed for front mounting.
Each Front Panel has its own cut-out drawing.
For the appropriated drawing see the specific data sheet.
To clamp the Front Panel into the cut-out you can use the attached fasting clamps.
Fasting Clamp
CAUTION!
For the best installation result the use of all provided fasting clamps
is highly recommended. Depending on individual installation cir-
cumstances a new IP rating may be considered.
Touch-it CE
Operating Instructions
www.christ-elektronik.de Tel.: +49 8331 8371-0
2.1.3 Touch-it CE VESA
The variant Touch-it CE VESA is designed for VESA MIS-D, 75, C mounts.
Some panels can also be mounted with VESA MIS-D, 100, C.
Suitable mounting variants are:
VESA Desk Stand Arm Mounting System VESA-SA75
Touch-it CE
Operating Instructions
www.christ-elektronik.de Tel.: +49 8331 8371-0
2.2 Interfaces Connector Side
USB
2 x USB Host (Type A)
1 x Mini USB OTG (Type B) (optional)
Ethernet
1 x 100Mbit Ethernet
2 x 100Mbit Ethernet (optional)
Communication
1 x RS-232
1 x RS-232 or RS-485
1 x CAN (optional)
8 x I/Os (optional)
Mass Storage
1 x microSD up to 32GB
Power Connector
Phoenix
Connector side Touch-it CE completely
Connector side Touch-it CE standard
Connector side Touch-it CE CODESYS ready
These are the standard interface configurations. Others are possible.
For the correct interface configuration see the specific data sheet.
All interfaces are described in the chapter Interfaces.
Indice
Altri manuali Christ Elektronik Pannello touch
