
CHANGING CYLINDERS
This barbecue is designed for use with propane cylinders of 19 kg in weight. WHEN
CHANGING cylinders follow the instructions in order as noted below.
a) Turn ‘OFF’ the barbecue by first turning the cylinder valve on the gas
bottle in a clockwise direction.
b) Turn ‘OFF’ clockwise both gas taps situated at the ends of the barbecue.
c) Extinguish all naked lights, cigarettes and other sources of ignition in the
vicinity of the barbecue.
d) The regulator can now be disconnected from the gas cylinder valve by
turning clockwise with the aid of the cylinder spanner provided.
e) Screw the black cylinder sealing plug into cylinder valve on the empty
cylinder by turning anticlockwise with a screwdriver.
f) Ensure that the cylinder valve on the full cylinder is turned ‘OFF’ by
turning in a clockwise direction. Remove the black sealing plug from the
cylinder valve by turning clockwise with a screwdriver.
WARNING: THE CHANGING OF CYLINDERS MUST BE CARRIED OUT
IN A FLAME FREE ENVIRONMENT.
The following paragraphs headed CONNECTING THE REGULATOR,
POSITIONING THE GAS CYLINDER, and LIGHTING THE BARBECUE must be
carried out in strict sequence.
CONNECTING THE REGULATOR
Check that the hose is completely over the nozzles on the regulator and on the
barbecue and that it is secured firmly in place with a hose clip at each end. Examine
the flexible hose regularly and get your dealer to fit new hose if perished, worn or
damaged in any way.
LPG ATTACKS NATURAL RUBBER –ONLY USE HOSE TO BS:3212 TYPE
2 SUPPLIED BY YOUR DEALER.
When connecting the regulator to the cylinder avoid undue twisting of the flexible
hose. The approved regulator supplied with this barbecue is preset at 1.0 bar and is
for use on ‘PROPANE ONLY’. THE LEAFLET IS ATTACHED TO THE
REGULATOR. THIS MUST BE READ THOROUGHLY AND THE
CONNECTING INSTRUCTIONS FOLLOWED EXACTLY. THE CYLINDER