Cinetics AXIS360 Manuale utente

Quick Start Guide

Basic set-up for your

Axis360 system

Table of Contents

1| Setting up Slide

slider assembly

attach belt to cart

attach ballhead to cart

connect motor to controller

attach slider to tripod(s)

2| Setting up Pan

option #1 for tripod mount

option #2 for slider mount

3| Setting up Tilt

4| Setting up Pan and Tilt

5| Setting up Slide and Pan

6| Setting up Slide, Pan, and Tilt

7| Quickstart Controller Settings

Parts

Optional: Shutter Release Cable

1 | Setup up Slide

Step 2. Remove end caps from rails (Figure 1)

Step 3. Remove outrigger leg from rails (Figure 2)

Step 4. Attach additional rails, screw together all the way

Step 5. Move rail brace to the center where the rails connect (Figure 3)

Step 6. Replace outrigger leg and end caps

Slider Assembly (The slider comes partially assembled)

Step 1. First take your slider and un-fold the outrigger legs by loosening the knobs. Position the legs so

your slider is standing. For ideal balance, you don’t want legs too narrow or too spread apart

Be sure to push outrigger legs all the way on, this is important for putting on the belt

See it in video here: https://vimeo.com/90878151

The side with the raised Cinetics lettering

is the brake, tighten or loosen to engage or

disengage brake. The other side is the

tensioner, tighten to make sure it is tight

enough to keep the weight of the camera

level on the rails without tightening too

much to restrict the slide.

1 | Setup up Slide cont.

Cart Overview

Attach the motor drive belt

TIP: It is important that the belt is taut and without any slack

Step 7. Take one end of the belt and loop it under the cart so you won’t have to thread it through later

(Figure 4)

Step 8. Push the belt loop down with your ﬁnger and lock into the cart hook. You want the grooved side

of the belt facing inward. Pull tight so there is no extra room around the hook (Figure 5)

Step 9. Put on brake to stop your cart from moving

Step 10. Loosen pulley tensioner and bring all the way forward (Figure 6)

See it in video here: https://vimeo.com/121074865

Attach the motor drive belt cont.

Step 11. Loop the belt around the pulley with the grooved side inward for grip (Figure 7)

Step 12. Thread belt under the cart and loop belt around the motor on the other end of the slider (Figure 8)

Step 13. Release brake on the cart by loosening the brake

TIP: To attach the other belt loop you can use your hand to push the cart toward the belt loop you are

hooking on, this will reduce any slack in the belt (Figure 9)

Step 14. Push the other belt loop down over the hook (Figure 10)

Step 15. Tighen pulley tensioner by pushing it away from the cart, then secure it by tightening the knob;

The belt should be taut (Figure 11)

1 | Setup up Slide cont.

Attach Ballhead to Cart

Step 16. Attach ballhead, you can use the one we provide or your own (Figure 12)

Step 17. Under cart use the silver screw to secure ballhead to cart, tighten with Hex Key (Figure 13)

Step 18. Screw Clamp onto ballhead and arca-style plate into your camera

Connect Motor to Controller

Step 19. Plug motor cable into Motor Port (Figure 14)

Step 20. Snap motor onto the Male Quick Connect piece next to the motor (Figure 15)

TIP: Snap the Quick Connect pieces together by ﬁrst positioning them together at an angle then

pushing downward and forward like popping on a bottle cap (Figure 16)

Step 21. Place camera on ballhead

Step 22. Connect camera cable to camera

Figure 12.

1 | Setup up Slide cont.

Figure 13.

Figure 14.

Figure 15. Figure 16. 6.

1 | Setup up Slide cont.

Attach Slider to Tripod(s)

You can mount the Axis360 on any tripod by connecting it to the rail brace or outrigger legs. The Rail

Brace has a 3/8"-16 thread and the Outrigger Legs have 1/4”- 20 threads. The Slider can be mounted

horizontally or vertically.

Figure 17. Figure 18.

Two Axis360 vertical slider setup on tripod

Parts Needed:

Arca-style plate

Motor

Ballhead

Controller

Tripod

There are two preferred setup options:

Option 1. Attachment for Tripod

Step 1. Attach Axis360 Motor to tripod (Figure 19 & 20)

Step 2. Place ballhead on Axis360 Motor and attach the clamp to it (Figure 21)

Step 3. Attach arca style plate to camera and slide into clamp

TIP: Make sure clamp is securely tightened

Step 4. Connect cable to controller Camera Port (Figure 14)

Step 5. Snap the controller onto the motor using the quick connect pieces (Figure 15, 16 & 21)

2 | Setup up Pan

For heavier cameras we recommend a sturdy ballhead. You can attach a clamp directly onto the

motor (instead of the ballhead).

Figure 19. Figure 20. Figure 21.

See it in video here: https://vimeo.com/101748664

Option 2. Attachment for Slider

This set up is preferred for mounting on the slider for a SLIDE AND PAN though it also works on a tripod.

Step 1. Separate ballhead from Male Quick Connect (Figure 22 & 23) and set aside

TIP: Make sure the ballhead grip is un-tightened. It’s easier to un-snap the piece when the ballhead is

connected to something such as a tripod

Step 2. Screw Threaded Male Quick Connect into Motor and snap ballhead onto that connector (Figure 24)

2 | Setup up Pan cont.

Connector

Piece

Figure 22. Figure 23.

Cinetics Quick Connect Pieces

Threaded Male Quick ConnectMale Quick Connect Female Quick Connect

Figure 24.

See it in video here: https://vimeo.com/97264416

Indice

Manuali Bicicletta popolari di altre marche

RAMBO

RAMBO R1000X2M-FF-BFD Manuale utente

Vermeiren

Vermeiren SAFARI Manuale utente

Velec

Velec A2/36V Manuale utente

Coswheel

Coswheel A-ONE Manuale utente

Betzold

Betzold 97869 Manuale utente

Cervélo

Cervélo S3 2019 Manuale utente

Tenways

Tenways AGO X Manuale utente

Festo

Festo EGSC-BS-KF Manuale elenco delle parti

Gio Electric

Gio Electric H1 Volt Manuale utente

GOGOBEST

GOGOBEST GM30 Manuale utente

DAHON

DAHON CIAO - 2009 Manuale utente

Aprimatic

Aprimatic ONDA 500 Guida rapida

MV Agusta

MV Agusta Lucky Explorer GRAVEL Manuale di istruzioni

Greyp

Greyp G6 Series Manuale utente

Babboe

Babboe Carve-E Manuale utente

Huka

Huka orthros Manuale utente

Xtracycle

Xtracycle Stoker 2021 Manuale utente

APRILIA

APRILIA DORSODURO 750 ABS 2015 Manuale utente

cinetics AXIS360 Manuale utente

Manuali Bicicletta popolari di altre marche