CipherLab 5000 Manuale utente
CipherLab
5000/5100
Hardware Manual
Version 1.02
Sep. 13, 06
Reserved.
This page is a reverse of the preceding page; they are for identifying a draft version.
When the document is converted to PDF, they are to be replaced by the designed
cover and a blank page. To identify version of a PDF document, use the stamp tool.
(Draft / Final / For Public Release / Revised … etc.)
Statements
STATEMENTS
Copyright
© Syntech Information Co., Ltd. 2004 All rights reserved.
This document, as well as any software included, may not be reproduced, stored in
retrieval system or transmitted, in any form or by any means, without prior written
consent of the copyright owners.
Trademark
The logo is a registered trademark of Syntech Information Co., Ltd.
Disclaimer of Liability
Efforts have been made to ensure the accuracy of the information presented in this
document. In the interest of improving internal design, operational function, and/or
reliability, Syntech reserves the right to make changes to the products described in this
document without prior notice. Syntech does not assume any liability that may occur
due to the use or application of the product(s) or circuit layout(s) described herein.
Statements
Statements:
FCC Regulations & Technical Standards
FCC Regulations
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
zReorient or relocate the receiving antenna.
zIncrease the separation between the equipment and receiver.
zConnect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
zConsult the dealer or an experienced radio/TV technician for help.
Technical Standards
This equipment has been tested and found in compliance with the following technical
standards:
zLow Voltage Directive (LVD) – EN 60950
zElectromagnetic Compatibility (EMC) – EN 55022, EN 55024, EN 61000
Table of Contents
CONTENTS
REVISION HISTORY......................................................................................I
PREFACE..................................................................................................III
CARE &MAINTENANCE ..............................................................................1
GETTING READY ........................................................................................2
1. INTRODUCING 5000/5100.......................................................................3
1.1 Product Highlights ............................................................................................. 3
1.2 Nomenclature...................................................................................................... 4
1.2.1 Inside Enclosures........................................................................................5
1.2.2 Dimensions..................................................................................................6
1.3 Features .............................................................................................................. 7
1.3.1 Power ..........................................................................................................7
1.3.2 CPU...........................................................................................................10
1.3.3 Memory & Calendar ..................................................................................10
1.3.4 Keyboard...................................................................................................12
1.3.5 LCD ...........................................................................................................13
1.3.6 Status LEDs ..............................................................................................14
1.3.7 Buzzer.......................................................................................................14
1.3.8 Readers.....................................................................................................14
1.3.9 Digital Inputs..............................................................................................15
1.3.10 Digital Outputs.........................................................................................16
1.3.11 RS-232 ....................................................................................................17
1.3.12 RS-485 ....................................................................................................18
1.3.13 Ethernet...................................................................................................20
1.3.14 Programming Support .............................................................................21
1.4 Unpacking the package.................................................................................... 22
1.5 Options .............................................................................................................. 22
Tables of Contents
Contents:
Section 2 ~4.3
2. INSTALLING 5000/5100........................................................................23
2.1 Setting up the terminal..................................................................................... 23
2.2 Wiring................................................................................................................ 28
2.2.1 Pin Assignments........................................................................................29
2.2.2 RS-232 ......................................................................................................31
2.2.3 RS-485 ......................................................................................................32
2.2.4 Digital Inputs/Outputs................................................................................34
3. SYSTEM ARCHITECTURE.......................................................................35
3.1 Operation .......................................................................................................... 36
3.2 Download .......................................................................................................... 37
3.3 Management ..................................................................................................... 38
4. CONFIGURING 5000/5100 ....................................................................39
4.1 Identifying current menu ................................................................................. 39
4.2 Selecting from menus....................................................................................... 40
4.3 System Menu..................................................................................................... 42
4.3.1 Information ................................................................................................43
4.3.2 Settings .....................................................................................................44
4.3.3 Tests..........................................................................................................48
4.3.4 Memory .....................................................................................................50
4.3.5 Power ........................................................................................................51
4.3.6 Load Program............................................................................................52
4.3.7 NET Menu.................................................................................................53
Table of Contents
Contents:
Section 4.4 ~
4.4 Program Manager ............................................................................................ 59
4.4.1 Download ..................................................................................................60
4.4.2 Activate......................................................................................................63
4.4.3 Version ......................................................................................................64
4.5 Kernel Menu..................................................................................................... 65
4.5.1 Information ................................................................................................66
4.5.2 Load Program............................................................................................67
4.5.3 Kernel Update ...........................................................................................68
4.5.4 Test & Calibrate.........................................................................................68
5. MANAGING 5000/5100.........................................................................69
5.1 For proprietary applications ............................................................................ 70
5.2 For custom applications................................................................................... 70
SPECIFICATIONS ......................................................................................71
TROUBLESHOOTING .................................................................................73
APPENDIX I–MOUNTING TEMPLATE .........................................................75
List of Tables
Contents:
Tables
Table 1: Power consumption................................................................................8
Table 2: Memory explained................................................................................10
Table 3: Keypad explained.................................................................................12
Table 4: Display formats.....................................................................................13
Table 5: Types of readers ..................................................................................14
Table 6: Decide resistance value.......................................................................15
Table 7: Optional accessories............................................................................22
Table 8: Stages of installation............................................................................23
Table 9: Types of interfaces...............................................................................28
Table 10: Pin Assignment of JP2.......................................................................29
Table 11: Pin Assignment of JP3.......................................................................30
Table 12: D/I groups...........................................................................................34
Table 13: D/O groups.........................................................................................34
Table 14: Purposes of software modules/menus ...............................................36
Table 15: Application programs..........................................................................37
Table 16: Management programs ......................................................................38
Table 17: Function keys used in selecting from menus......................................40
Table 18: Default system settings......................................................................44
Table 19: Downloading interfaces......................................................................52
Table 20: Listing of multiple programs and font .................................................60
Table 21: Downloading spare programs ............................................................61
Table 22: Downloading active program or font...................................................62
Table 23: Device code explained.......................................................................66
List of Figures
Contents:
Figures
Figure 1: References for setting up system..........................................................2
Figure 2: Nomenclature of terminal......................................................................4
Figure 3: Components inside terminal..................................................................5
Figure 4: Physical dimensions..............................................................................6
Figure 5: Installing battery pack ...........................................................................9
Figure 6: Installing memory card........................................................................11
Figure 7: Keypad layout .....................................................................................12
Figure 8: D/I sample circuit.................................................................................15
Figure 9: An example of RS-232 connection......................................................17
Figure 10: RS-485 topology ...............................................................................18
Figure 11: An example of RS-485 connection....................................................19
Figure 12: An example for Ethernet networking.................................................20
Figure 13: Installing Ethernet card .....................................................................21
Figure 14: Drilling holes & assembling cables....................................................24
Figure 15: Mounting to wall................................................................................25
Figure 16: Wiring & connecting..........................................................................26
Figure 17: Assembling enclosures.....................................................................27
Figure 18: Terminal blocks.................................................................................28
Figure 19: RS-232 wiring....................................................................................31
Figure 20: Terminator’s switch...........................................................................32
Figure 21: RS-485 wiring....................................................................................33
Figure 22: System Architecture..........................................................................35
Figure 23: Function keys as menu indicators.....................................................41
Figure 24: System Menu ....................................................................................42
Figure 25: Program Manager menu ...................................................................59
Figure 26: Kernel Menu......................................................................................65
Figure 27: Remote management........................................................................69
Figure 28: Mounting template.............................................................................75
Questo manuale è adatto per i seguenti modelli
1
Indice
