CIRCLE CIR315C Manuale utente
Subject to change without prior notice info@abcircle.com
www.abcircle.com
CIR315C Contactless Smart Card Reader
User Manual
CIR315C – User Manual [email protected]
Version 0.00.03 www.abcircle.com
Page 2 of 7
Driver installation Procedure
* Driver signed by Microsoft and WHQL, user can install the driver with Window Update. In case that
cannot install via Window Update, please process the below steps to Manual installation
Hardware requires:
CIR315C
PC with OS windows 7 or above
Software requires:
CIR315 Driver Package
Steps:
1. Install driver by running Setup.exe
2. Follow the on-screen instructions to install the driver to the system.
3. Connect CIR315C to PC
4. If the device name under Device manager is “CIR315 CL”, it shows the driver is
correctly installed
CIR315C – User Manual [email protected]
Version 0.00.03 www.abcircle.com
Page 3 of 7
Operation Example
Hardware requires:
CIR315C
PC with OS windows 7 or above
Mifare 1k Test Card
Software requires:
Any PCSC Application (e.g. APDU.exe)
Steps:
1. Plug in the reader into the PC
2. Open “APDU.exe”
CIR315C – User Manual [email protected]
Version 0.00.03 www.abcircle.com
Page 4 of 7
3. Tag Test card on CIR315C
Select “T1”, Message = “ff 82 00 00 06 ff ff ff ff ff ff”
4. Press “2. Connect”
CIR315C – User Manual [email protected]
Version 0.00.03 www.abcircle.com
Page 5 of 7
5. Press “3. Transmit”
6. Result will be shown on the “Answer from the card:”
CIR315C – User Manual [email protected]
Version 0.00.03 www.abcircle.com
Page 6 of 7
Parameter Sheet
Device
AB Circle’s CIR315C
Contactless Smart Card Interface
Standard ISO/IEC 14443 Type A & B, ISO/IEC 18092, ISO/IEC 15693
Protocol T=CL (translated to T=1 for PC/SC compliance)
Operating Frequency 13.56 Mhz
Supported Card Types ISO/IEC14443-4 A & 4B Cards, ISO/IEC15693-3 Cards,
MIFARE series: Classic/ PLUS/ Ultralight/ Ultralight C/
DESFire/ DESFire EV1/ DESFire EV2, etc
FeliCa (Standard/ Lite/ Plug), Calypso, J-LIS Cards,
NFC Forum Tag type 1/2/3/4/5
Speed 106/ 212/ 424/ 848kbps (Default: 106kps)
Reading Distance Up to 50 mm (depending on tag type)
Extended APDU Support
Physical Characteristics
Dimensions 24.0 x 72.0 x 10.0 mm (no clip)
Weight 13.0g (± 5 g)
Casing White ABS
Host Interface
Power Supply USB Bus-powered
Current Consumption <250 mA (Operating), <50mA (Standby)
USB Standard USB 2.0 Full Speed (12 Mbps)
USB Connector Type Default: Type A, Optional: Type C
Human Interface
LED 1 LED: Blue (Operation Status)
Software and Driver
Firmware Upgradeable Support, via USB
Driver
CCID
Application Programming Interface
(API)
PC/SC
Operating Conditions
Operating Temperature -10 °C – 55 °C
Operating Humidity Max. 95% (non-condensing)
Storage Temperature -20 °C – 70 °C
Meantime Between Failure (MTBF) 600,000 hours
CIR315C – User Manual [email protected]
Version 0.00.03 www.abcircle.com
Page 7 of 7
Compliance/ Certifications
Standards/ Systems ISO/IEC14443, ISO/IEC18092, ISO/IEC15693,
ISO/IEC7816 (SAM slot), USB 2.0 Full Speed, CCID,
Microsoft® WHQL
Regulatory/ Environmental EN62368, CE, FCC, VCCI, MIC, RoHS3, REACH
Operational Environment
Supported Operating Systems Windows® 7 and above, Linux®, Mac OS® 10.12 and
above, Android™ 6.0 and above
Ordering Information
Produce Code CIR315C-01: USB Type A Connector,
CIR315C-02: USB Type C Connector (Optional)
Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority
to operate the equipment.
NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the
user authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The End user must follow
the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Indice
Altri manuali CIRCLE Lettore di schede
