Circutor ePARK M-S2 Manuale utente
ePARK
INSTALLATION GUIDE
(M262A01-03-23A)
ePARK
2Installation guide
ePARK
3Installation guide
Disclaimer
Disclaimer
CIRCUTOR S.A.U. reserves the right to make modifications to the device or the unit specifications set
out in this instruction manual without prior notice.
CIRCUTOR S.A.U. on its web site, supplies its customers with the latest versions of the device speci-
fications and the most updated manuals.
www.circutor.com
Revision log
Date Revision Description
06/19 M262A01-03-19A Initial Version
11/19 M262A01-03-19B Changes in the following sections:
1.- 2.- 3.- 4.- 5.- 5.A.- 5.B.- 5.E.- 5.F.- 6.
09/20 M262A01-03-20A Changes in the following sections:
6.
04/21 M262A01-03-21A Changes in the following sections:
2.1.- 5.F.- 6.
06/21 M262A01-03-21B Changes in the following sections:
5.E.- 6.
10/21 M262A01-03-21C Changes in the following sections:
4.- 6.
10/21 M262A01-03-21D Changes in the following sections:
6.
07/23 M262A01-03-23A Changes in the following sections:
1.- 2.B.- 3.- 5.B.- 5.E.- 5.J.- 6.
ePARK
4Installation guide
ePARK
Installation guide
COPYRIGHT INFORMATION
This document is copyrighted, 2023 by CIRCUTOR S.A.U. All rights are reserved. CIRCUTOR S.A.U.
reserves the right to make improvements to the products described in this manual at any time
without notice.
No part of this manual can be reproduced, copied, translated or transmitted in any form or by any
means without the prior written permission of the original manufacturer. Information provided in
this manual is intended to be accurate and reliable. However, the original manufacturer assumes no
responsibility for its use, or for any infringements upon the rights of third parties at hat may result
from its use.
All other product names or trademarks are properties of their respective owners.
ePARK
5Installation guide
Contents
Disclaimer.......................................................................................................................................................... 3
Revision log....................................................................................................................................................... 3
Contents ............................................................................................................................................................ 5
1.- So, hello! ......................................................................................................................................................................6
2.- Before the installation .............................................................................................................................................8
A.- Important Safety Instructions .............................................................................................................8
B.- Electrical wiring considerations.......................................................................................................... 9
3.- Overview.................................................................................................................................................................... 10
4.- Dimensions ............................................................................................................................................................... 12
5.- Installation ................................................................................................................................................................ 14
A.- Requirements........................................................................................................................................15
B.- Opening................................................................................................................................................. 16
C.- Positioning.............................................................................................................................................17
D.- Fixing ..................................................................................................................................................... 18
E.- Wiring..................................................................................................................................................... 19
F.- Closing.....................................................................................................................................................21
6.- Technical Data ..........................................................................................................................................................24
Need help?...................................................................................................................................................... 27
Guarantee........................................................................................................................................................ 27
ePARK
6Installation guide
1So, hello!
ePARK
7Installation guide
This manual provides commissioning information about ePark, which has been designed and tested
to allow electric vehicle charging, specified in IEC 61851
This document has different sections such as step-by-step installation procedure and technical data.
THE FOLLOWING SYMBOLS ARE USED FOR IMPORTANT
SAFETY INFORMATION IN THIS DOCUMENT
ELECTRIC RISK
Necessary precautions shall be taken to prevent any electrical risk
while the operations are carried out within the unit.
Unit must be disconnected from any power source during
commissioning.
ATTENTION!
Indicates that the damage to property can occur if appropriate
precautions are not taken
• Complies with IEC 61851; Electric vehicle conductive charging system (IEC 61851-
1:2017 and IEC 61851-21-2).
• Complies with IEC 62196, Plugs, socket-outlets, vehicle couplers and vehicle inlets
(IEC 62196-1 and IEC 62196-2).
• Standards: 2014/35/UE, LVD;2014/30/UE, EMC
• Complies with the Electrical (Safety of) Equipment Regulations 2016 and the
Electromagnetic Compatibility Regulations 2016
• RFID complies with ISO 14443A/B
• The 4G modem complies with CE/RED regulations and the Radio Equipment
Regulations of 2017.
1So, hello!
ePARK
8Installation guide
A Important Safety Instructions
Read carefully all the instructions before starting in order to
ensure properly installation of the Charge Point.
The Charge Point is designed for installation in indoor and outdoor areas. For each of the different
conditions of installation, the unit must be installed safely and ensure adequate protection.
• Charge Point must not be installed in areas where
there is potential risk of explosions.
• Do not perform any repair o manipulation of
the unit while it is energized.
• Do not install the Charge Point where falling
objects may damage the equipment.
• Only trained and qualified personnel should
have access to low-voltage electrical parts
inside the unit.
• The surface where the Charge Point is placed must
withstand the mechanical forces.
• Check the installation annually by qualified
technician.
• This unit is no shall be used for anything other
purpose than electric vehicle charging modes as
are expected in IEC 61851.
• Remove from service any item that has
a fault that could be dangerous for users
(broken plugs, caps that don’t close...).
• Do not modify this unit. If modified, CIRCUTOR will
reject all responsibility and the warranty will be
void.
• Use only CIRCUTOR supplied spare parts.
• Comply strictly with electrical safety regulations
according to your country.
• Do not use this product if the enclosure or
the EV connector is broken, cracked, open, or
shows any other indication of damage.
• Do not use any adapter, except those approved by
the EV manufacturer.
Refer to 6.- TECHNICAL DATA section for more information about environmental installation
conditions.
2Before the installation
ePARK
9Installation guide
B Electrical wiring considerations
Take into consideration this section before start wiring connec-
tions of the Charge Point.
1.- ELECTRICAL PROTECTIONS
It is possible that the Charge Point does not include electrical protection elements.
If this device has internal electrical protections, they are installed in each socket to protect the user
against electrical failure, in accordance with the international standard IEC 61851-1:2017.
In order to guarantee the total protection of the users and the installation (power supply line
included) in front of any electrical hazard, it is mandatory to install a main circuit breaker (MCB) and
a residual current device (RCD) upstream of the charger.
These electrical protections and the rest of the installation have to be aligned with the local and
national rules. The selectivity of the protections has to be guaranteed at all times.
3.- POWER SUPPLY LINE DIMENSIONING
The dimensioning of the input power supply line of the Charge Point must be checked by a qualified
electrician. Note that various factors such as cable length between distribution board and Charge
Point, maximum output current of the Charge Point may have influence of the selected cable.
In such cases, increasing the cable cross-section it is required to adapt the temperature resistance
of the power supply line.
3.- MAXIMUM OUTPUT CURRENT
Please refer to the TECHNICAL DATA section to consult the default factory settings from maximum
output current of the Charge Point.
If the power supply is less than maximum output current and adjustment to a lower nominal current
needs to be performed.
2Before the installation
ePARK
10 Installation guide
What’s included:
Installation
Guide
Charge Point Installation
Guide
Allen wrench
2.5 mm
3Overview
Questo manuale è adatto per i seguenti modelli
7
Indice
Altri manuali Circutor Accessori per automobili
Circutor
Circutor Wallbox ePark Series Manuale utente
Circutor
Circutor URBAN Manuale utente
Circutor
Circutor Raption 150 Series Manuale utente
Circutor
Circutor URBAN M11 Manuale utente
Circutor
Circutor Raption Series Manuale utente
Circutor
Circutor URBAN Series Manuale utente
Circutor
Circutor Raption 50 Series Manuale utente
Circutor
Circutor Wallbox eNext Series Manuale utente
Circutor
Circutor URBAN WB DC Series Manuale utente
Circutor
Circutor Raption 50 HV Manuale utente
