Circutor Line-EDS-Cloud Manuale utente

INSTRUCTION MANUAL

(M231B01-03-19A)

Access point

line-EDS-Cloud

Instruction Manual

SAFETY PRECAUTIONS

DISCLAIMER

CIRCUTOR, SA reserves the right to make modi cations to the device or the unit speci ca-

tions set out in this instruction manual without prior notice.

CIRCUTOR, SA on its web site, supplies its customers with the latest versions of the device

speci cations and the most updated manuals.

www.circutor.com

CIRCUTOR, recommends using the original cables and accessories that are

supplied with the device.

DANGER

Warns of a risk, which could result in personal injury or material damage.

ATTENTION

Indicates that special attention should be paid to a speci c point.

Follow the warnings described in this manual with the symbols shown below.

If you must handle the unit for its installation, start-up or maintenance, the following

should be taken into consideration:

Incorrect handling or installation of the unit may result in injury to personnel as well as damage

to the unit. In particular, handling with voltages applied may result in electric shock, which may

cause death or serious injury to personnel. Defective installation or maintenance may also

lead to the risk of  re.

Read the manual carefully prior to connecting the unit. Follow all installation and maintenance

instructions throughout the unit’s working life. Pay special attention to the installation stan-

dards of the National Electrical Code.

Refer to the instruction manual before using the unit

In this manual, if the instructions marked with this symbol are not respected or carried out correctly, it can

result in injury or damage to the unit and /or installations.

CIRCUTOR, SA reserves the right to modify features or the product manual without prior noti cation.

Instruction Manual

line-EDS-Cloud

CONTENTS

SAFETY PRECAUTIONS ��3

DISCLAIMER ��3

CONTENTS��4

REVISION LOG��5

SYMBOLS��5

1�- VERIFICATION UPON RECEPTION�� 6

2�- PRODUCT DESCRIPTION��6

3�- INSTALLATION OF THE DEVICE�� 7

3�1�- PRELIMINARY RECOMMENDATIONS ��7

3�2�- INSTALLATION ��7

3�3�- 72 x 72 mm PANEL ADAPTER��8

3�4�- DEVICE TERMINALS��9

3�5�- EXPANSION WITH OTHER DEVICES��9

3�5�1�- Line-M-EXT-PS POWER ADAPTER��10

3�5�2�- INSTALLATION �� 11

3�6�- CONNECTION DIAGRAMS �� 13

4�- OPERATION ��14

4�1�- OPERATING PRINCIPLE��14

4�2�- LED INDICATORS ��14

4�3- DIGITAL OUTPUTS ��16

5�- COMMUNICATIONS��17

5�1- RS-485 COMMUNICATIONS��17

5�1�1�- CONNECTIONS��17

5�2- Wi-Fi COMMUNICATIONS ��18

5�2�1�- USAGE ENVIRONMENT AND HEALTH ��18

5�2�2�- Wi-Fi COMMUNICATIONS��18

6�- CONFIGURATION WEBSITE �� 19

6�1- CONFIGURATION OF THE line-EDS-Cloud DEVICE �� 20

6�1�1�- ETHERNET��21

6�1�2�- Wi-Fi ��21

6�1�3�- SYSTEM �� 22

6�2- CONFIGURATION OF THE DATA UPLOAD SYSTEM �� 22

6�3- CHECKING THE STATUS OF THE SYSTEM�� 32

6�3�1�- INFO��32

6�3�2�- STATISTICS��32

6�3�3�- UPDATE�� 33

6�3�4�- PASSWORD ��33

6�3�5�- RESET �� 34

6�3�6�- LOG �� 34

7�- TECHNICAL FEATURES ��35

8�- MAINTENANCE AND TECHNICAL SERVICE�� 37

9�- GUARANTEE��37

10�- CE CERTIFICATE��38

ANNEX A: CONFIGURATION OF THE CLOUD PLATFORMS �� 41

A�1- MyCircutor��41

A�2- AMAZON WEB SERVICES (AWS) �� 44

A�3- GOOGLE CLOUD IoT Core��51

line-EDS-Cloud

Instruction Manual

REVISION LOG

Table 1: Revision log�

Date Revision Description

05/20 M231B01-03-19A First Version

Note: The images on the devices are for illustrative use only and may differ from the original

device.

SYMBOLS

Table 2: Symbols�

Symbol Description

In accordance with the relevant European directive.

In accordance with the CMiM directive.

Device covered by European Directive 2012/19/EC. At the end of its useful life, do not

leave the device in a household refuse bin. Follow local regulations on electronic equip-

ment recycling.

Direct current.

~Alternating current.

Instruction Manual

line-EDS-Cloud

1�- VERIFICATION UPON RECEPTION

Upon reception of the device check the following points:

a) The device meets the specications described in your order.

b) The device has not suffered any damage during transport.

c) Perform an external visual inspection of the device prior to switching it on.

d) Check that it has been delivered with the following:

- An installation guide

If any problem is noticed upon reception, immediately contact the transport

company and/or CIRCUTOR’s after-sales service�

2�- PRODUCT DESCRIPTION

line-EDS-Cloud is a device that works as connector between eld devices with Modbus RTU

or Modbus TCP communications and data collection systems in the cloud (Big Data).

The line-EDS-Cloud includes a Web page to congure the Modbus devices’ memory proles

or maps and select which variables are to be transferred to the Cloud systems.

The device features:

- 5 indication LEDs

- 2 digital outputs.

- RS-485 and Ethernet communications.

- Wi-Fi connection.

line-EDS-Cloud

Instruction Manual

3�- INSTALLATION OF THE DEVICE

3.1.- PRELIMINARY RECOMMENDATIONS

In order to use the device safely, personnel operating it must follow the safety

measures that comply with the standards of the country where it is to be installed;

operators must wear the required personal protective equipment (rubber gloves,

approved facial protection and ame-resistant clothing) to prevent injuries from

electric shock or arcs caused by exposure to current-carrying conductors, and

they must heed the various warnings indicated in this instruction manual.

The line-EDS-Cloud device must be installed by authorised, qualied personnel.

The power supply plug must be disconnected before handling, altering the connections or re-

placing the device. It is dangerous to handle the device while it is powered.

Cables must always be kept in perfect condition to avoid accidents or injury to personnel or

installations.

The manufacturer of the device is not responsible for any damage resulting from failure by the

user or installer to heed the warnings and/or recommendations set out in this manual, nor for

damage resulting from the use of non-original products or accessories or those made by other

manufacturers.

Do not use the device to perform any operation if you detect any anomaly or malfunction.

Before carrying out maintenance, repair or handling of any of the device’s con-

nections, the device must be disconnected from all power sources, both from the

device’s own power supply and the measurement’s.

Contact the after-sales service if you detect that the device is not working prop-

erly.

3.2.- INSTALLATION

The device must be installed on an electric panel or enclosure, at tached to a DIN rail (IEC

60715).

When the device is on, its terminals, opening covers or removing elements may

expose the user to parts that are hazardous to touch. Do not use the device until

it is fully installed.

The device must be connected to a power supply circuit protected by gl type (IEC 269) or M

type fuses, between 0.5 and 2A. It must be tted with a circuit-breaker or equivalent device to

disconnect the device from the mains supply.

The power supply circuit must be connected with a 1mm² minimum cross-section cable.

Instruction Manual

line-EDS-Cloud

3.3.- 72 x 72 mm PANEL ADAPTER

Note: The 72 x 72 mm panel adapter is a separately sold accessory.

CIRCUTOR has a panel adapter for the line-EDS-Cloud devices for their installation in 72 x

72 mm panels.

Figure 1 illustrates how the panel adapter connects to a line-EDS-Cloud.

Before installing the adapter, the device must be disconnected from all power

and measurement supplies.

Figure 1: Installation of the panel adapter�

Table 3: Technical characteristics of the Panel Adapter�

Technical Specications

Protection degree IP40

Casing Self-extinguishing V0 plastic

68 mm

Figure 2: Cut in the panel�



line-EDS-Cloud

Instruction Manual

3.4.- DEVICE TERMINALS

Ethernet

Figure 3: Device terminals: Upper - Lower�

Table 4: List of terminals�

Device terminals

A1: Power supply 21: 1, Digital output 1

A2: Power supply 20: 2, Digital output 2

24: A+, RS-485 19: C, Common of digital outputs

23: S, GND for RS-485 Ethernet, Ethernet connection

22: B-, RS-485

3.5.- EXPANSION WITH OTHER DEVICES

The line-EDS-Cloud devices can be expanded with other devices in the line range, the line-

CVM and line-M expansion modules.

The line-EDS-Cloud and line-CVM devices enable up to 2 expansion modules to be directly

connected to their right-hand side(1).

line-EDS line-M line-M line-M line-M

line-CVM

Figure 4: line-EDS-Cloud and line CVM expansion module connection�

(1) Expansion module types: line-M-4IO-R, line-M-4IO-T, line-M-4IO-RV and line-M-4IO-A�

In installations with line-EDS-Cloud devices, a total of up to seven devices may be connected

to their right-hand side.

Instruction Manual

line-EDS-Cloud

line-EDS line-M line-M line-CVM line-M line-M line-CVM line-CVM

Figure 5: Typical installation of a line-EDS-Cloud with 7 devices�

Note: An installation may only be tted with one line-EDS-Cloud device.

Note: In installations without line-EDS-Cloud devices, only one line-CVM device may ne in-

stalled.

Note: All line-EDS-Cloud and line-CVM devices must be connected to the auxiliary power

supply.

3�5�1�- Line-M-EXT-PS POWER ADAPTER

Line-M-EXT-PS is a power adapter belonging to the line family of devices. The module con-

nects to the left-hand side of the devices to be fed. It can supply up to 10 VA, allowing it to power

a limited number of devices.

The maximum set it can supply is: 1 line-EDS-Cloud + 1 line-CVM + 1 line-M (Figure 6).

line-EDS line-M

line-M-EXT-PS line-CVM

Figure 6: Maximum set a line-M-EXT-PS can supply�

Multiple line-M-EXT-PS devices can be connected to supply sets with power above 10VA. Each

line-M-EXT-PS will power the devices connected to its right-hand side (Figure 7).

line-EDS line-M line-M line-CVM line-M line-M line-CVM line-CVM

line-M-EXT-PS line-M-EXT-PS line-M-EXT-PS

Figure 7: Multiple line-M-EXT-PS connection�

Note: None of the line-EDS-Cloud or line-CVM devices should be connected to the auxiliary

power supply.

line-EDS-Cloud

Instruction Manual

Altri manuali per line-EDS-Cloud

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Circutor Portale

Circutor

Circutor airLINK Manuale utente

Circutor

Circutor LR1RS+ Manuale utente

Circutor

Circutor airBRIDGE RS485 Manuale utente

Manuali Portale popolari di altre marche

LST

LST M500RFE-AS Manuale utente

Kinnex

Kinnex Media Gateway Manuale utente

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuale utente

Telsey

Telsey CPVA 500 - SIP Manuale utente

RTA

RTA 460A-NNA4 Scheda tecnica

Shaw

Shaw Gateway HDPVR Manuale utente

ABB

ABB VSN900 Guida rapida

Commander

Commander Pulse Manuale utente

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuale utente

NETGEAR

NETGEAR C6300BD Manuale utente

Amit

Amit CDW531AM Manuale utente

HMS

HMS Netbiter EasyConnect EC150 Manuale utente

Huawei

Huawei EchoLife HG620 Manuale utente

AT&T

AT&T U-verse 3801 Manuale per l'uso e la cura

Logic IO

Logic IO RTCU MX2 turbo Manuale utente

Suttle

Suttle MediaMAX MXM-521 Manuale utente

Circutor line-EDS-Cloud Manuale utente

Manuali Portale popolari di altre marche