Cisco MX200 G2 Manuale utente

Installing Cisco TelePresence MX200 G2 - Wheel Base

This installation guide covers MX200 G2 with a wheel base.

Dimensions

Height: 1480mm / 58.3in.

Width: 995 mm / 39.2 in.

Depth: 715 mm / 28.0in.

Weight total: 33 kg / 73 lb

Weight monitor: 24 kg / 53lb

Manpower

Two people working together are required to mount the

monitor to the base module.

Room setup

Explore the Cisco Project Workplace website to

find inspiration and guidelines when preparing your

office or meeting room for video conferencing,

http://www.cisco.com/go/projectworkplace

Documentation

Cisco Spark: Visit the Cisco Spark help site to find

more information about Spark registered room

systems, http://help.ciscospark.com

Other services: Visit the Cisco web site to find user

guides and compliance and safety information for

the video system, http://www.cisco.com/go/mx-docs

Installing Cisco TelePresence MX200 G2 - Wheel Base

• Wheel base

• Column

• Screws for

the base

• Screwdriver

Accessories:

• Microphone(s)

• Cables

• Screws for mounting the monitor

• Gloves

Monitor

Back cover

Touch controller

Installing Cisco TelePresence MX200 G2 - Wheel Base

Optional

It is possible to replace the wheels with rubber pads.

The rubber pads are kept underneath the wheel

base, and must be moved to their correct position.

M5x8 (Allen key, 3 mm)

1Mount the wheel base

You may place the column on the empty

wheel base box as illustrated. Then it is

easier to enter the screws from below.

4 ×

4 × M6x20

Installing Cisco TelePresence MX200 G2 - Wheel Base

2Mount the monitor

The monitor may be tilting slightly

forward. If you gently pull it to a vertical

position, the screws enter more easily.

Front

Use gloves when

handling the monitor.

Remove the cable

channel lid for now.

You need it in step 4.

4 × M6x16

Installing Cisco TelePresence MX200 G2 - Wheel Base

3Connect the cables

Thread the cables up

through the hole in the base.

For maintenance only

Reset to factory

settings

Audio line output

Always use the provided

power cable.

The wall socket outlet must

be easily accessible after

installation.

Power switch Audio line input

LAN1

Video input2

(e.g. PC)

Video output2

(e.g. 2nd display)

Power (100-240 VAC, 50/60 Hz)

Touch

controller1

USB, for future use

HDMI

DVI-I

Microphone3

2nd microphone2, 3

1Use the cable that is labeled

with for the Touch controller;

use the cable that is labeled

with for the LAN

2Optional

3Always use the provided

Cisco TelePresence Table

Microphone 20

Installing Cisco TelePresence MX200 G2 - Wheel Base

• Connect to power and LAN/Ethernet.

• Switch on the system. The power switch is

placed next to the power connector at the

rear side of the system.

Wait while the unit starts up. Normally this takes a few

minutes. It may include automatic software upgrade and

restart of the Touch controller.

• Follow the instructions on the Touch controller.

Cisco Spark: To find more information on how to

get started with Spark registered systems, visit

http://help.ciscospark.com and look for Getting Started

articles for room systems.

Other services: For further information on set-up and

configuration, download the Getting Started Guide from the

Cisco web site, http://www.cisco.com/go/mx-docs

Never move the camera manually when power is switched

on; always use the camera control function on the Touch

controller to change the camera position.

5Start up the system

Snap on the cable

channel lid for strain relief.

Lead the cables out at the

front or back as appropriate.

4Snap on the cable channel lid

Installing Cisco TelePresence MX200 G2 - Wheel Base

EMC Class A declaration

WARNING: This is a class A product. In a domestic environment this

product may cause radio interference in which case the user may be

required to take adequate measures.

声明

此为

A级产品，在生活环境中，该产品可能会造成无线电干扰。在这种

情况下，可能需要用户对其干扰采取切实可行的措施。

WARNING: This is a class A product. In a domestic environment

this product may cause radio interference in which case the user

may be required to take adequate measures.

6Mount the back cover

Wind up the cables on the hook on the

back cover when rolling the unit. Also

hang the Touch controller on the hook.

Lift this handle to

lock/unlock the back

cover. Use both

hands if required.

Cisco has more than 200 offices worldwide.

Find an overview of the offices on the Cisco web site at

http://www.cisco.com/go/offices

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or

its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to

this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the

property of their respective owners. The use of the word partner does not imply a

partnership relationship between Cisco and any other company. (1110R)

Altri manuali per MX200 G2

Indice

Altri manuali Cisco Sistema di conferenza

Cisco

Cisco TelePresence SX20 Istruzioni per il montaggio

Cisco

Cisco SX80 Manuale utente

Cisco

Cisco Webex Room 70 Panorama Manuale utente

Cisco

Cisco MX200 G2 Manuale di servizio

Cisco

Cisco TelePresence SX20 Manuale di servizio

Cisco

Cisco TelePresence MX700 Manuale di servizio

Cisco

Cisco TelePresence EX Series Manuale utente

Cisco

Cisco EX60 Manuale utente

Cisco

Cisco TelePresence DX70 Manuale utente

Cisco

Cisco Webex Room Kit Mini Manuale utente

Cisco

Cisco Webex DX70 Manuale di servizio

Cisco

Cisco TelePresence DX80 Manuale utente

Cisco

Cisco TelePresence SX10 Manuale utente

Cisco

Cisco Quick Set C20 Manuale utente

Cisco

Cisco TelePresence System Codec C40 Manuale di servizio

Cisco

Cisco TelePresence SX10 Manuale utente

Cisco

Cisco TelePresence SX20 Manuale utente

Cisco

Cisco EX60 Manuale utente

Cisco

Cisco SX80 Manuale di servizio

Cisco

Cisco TelePresence DX80 Manuale utente

Cisco

Cisco TelePresence MX700 Manuale utente

Cisco

Cisco Webex Room Kit Mini Manuale utente

Cisco

Cisco TelePresence System Codec C90 Manuale di istruzioni

Cisco

Cisco TelePresence Manuale utente

Manuali Sistema di conferenza popolari di altre marche

Kramer

Kramer VIA GO Manuale utente

AVT

AVT MAGIC AC1 Go Manuale utente

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Manuale utente

Sony

Sony PCS-I150 Manuale utente

Middle Atlantic Products

Middle Atlantic Products VTC Series Manuale utente

Prentke Romich Company

Prentke Romich Company Vanguard Plus Guida

Speakerbus

Speakerbus iD 712 Manuale utente

Trelleborg

Trelleborg SafePilot CAT PRO Manuale utente

Sennheiser

Sennheiser ADN Manuale utente

ADTRAN

ADTRAN NetVanta 7100 Manuale utente

AINA

AINA PTT Voice Responder Manuale utente

Yamaha

Yamaha ProjectPhone PJP-100H Manuale utente

vissonic

vissonic VLI Series Manuale utente

Panasonic

Panasonic KX-VC500 Manuale utente

Poly

Poly Trio 8300 Manuale utente

Crestron

Crestron Mercury CCS-UCA-SMK Disegno dimensionale

Inmarsat

Inmarsat mini M Manuale utente

Tenveo

Tenveo ALL-IN-ONE Manuale utente