Cisco MX300 G2 Manuale di istruzioni

Installing Cisco TelePresence MX300 G2 - Floor Stand

This installation guide covers MX300 G2 with a floor stand.

Dimensions

Height: 1521 mm / 59.9 in.

Width: 1278mm / 50.4in.

Depth: 671 mm / 26.5in.

Weight total: 53kg / 117 lb

Weight monitor: 35kg / 78lb

Manpower

Two people working together are required to mount the

monitor to the base module.

Room setup

Explore the Meeting Room – London scenario on the Cisco Project

Workplace, http://www.cisco.com/go/projectworkplace, to find

inspiration and guidelines when preparing your office or meeting

room for video conferencing.

Documentation

The user documentation for this product, including compliance

and safety information, is available on the Cisco web site,

http://www.cisco.com/go/mx-docs

Installing Cisco TelePresence MX300 G2 - Floor Stand

• Floor stand base

• Column

• Base covers

• Screws for mounting the base

• Screwdriver

Back cover

Monitor

Accessories:

• Microphones

• Cables

• Screws for mounting

the monitor

• Gloves

Touch controller

Installing Cisco TelePresence MX300 G2 - Floor Stand

1Mounting the floor stand

4 × M6x16

Installing Cisco TelePresence MX300 G2 - Floor Stand

2Mounting the monitor

Use gloves when

handling the monitor.

Remove the cable

channel lid for now.

You need it in step 4.

The monitor may be tilting slightly

forward. If you gently pull it to a vertical

position, the screws enter more easily.

Front

4 × M6x16

Installing Cisco TelePresence MX300 G2 - Floor Stand

3Connecting the cables

For maintenance only

Reset to factory settings

Audio line output

Always use the provided

power cable.

The wall socket outlet must

be easily accessible after

installation.

Power switch

Audio line input

LAN **

Video input

(e.g. PC *)

Video output

(e.g. 2nd display *)

Power

(100-240 VAC,

50/60 Hz) Microphones

Touch

controller **

USB, for future use

HDMI

DVI-I

*Optional

** Use the cable that is labeled

with for the Touch controller;

use the cable that is labeled

with for the LAN

Installing Cisco TelePresence MX300 G2 - Floor Stand

5Starting up the system

• Connect to power and LAN/Ethernet.

• Switch on the system. The power switch is next

to the power connector at the rear side of the

system.

Wait while the unit starts up. Normally this takes a few minutes.

It may include automatic software upgrade and restart of the

Touch controller.

• If prompted, follow the instructions on the Touch controller to

set the language etc.

• If your system is not set up to be automatically provisioned,

you must configure the system before you can make your first

call. This is described in the Getting Started Guide, which is

available on the Cisco web site.

Never move the camera manually when power is switched on;

always use the camera control function on the Touch controller

to change the camera position.

4Leading out the cables

Snap on the cable

channel lid for strain relief.

Lead the cables in the cable slots. Lead them

out at the front or back as appropriate.

Lead the cables around the cable slot several

times if the cables are longer than you need.

Installing Cisco TelePresence MX300 G2 - Floor Stand

On our web site you will find an overview of the

worldwide Cisco contacts.

Go to: http://www.cisco.com/web/siteassets/contacts

Corporate Headquarters

Cisco Systems, Inc.

170 West Tasman Dr.

San Jose, CA 95134 USA

EMC Class A declaration

WARNING: This is a class A product. In a domestic environment

this product may cause radio interference in which case the

user may be required to take adequate measures.

声

明

此为

A级产品，在生活环境中，该产品可能会造成无线电干扰。在这种

情况下，可能需要用户对其干扰采取切实可行的措施。

WARNING: This is a class A product. In a domestic environment

this product may cause radio interference in which case the user

may be required to take adequate measures.

Lift this handle to

lock/unlock the back

cover. Use both

hands if required.

6Mounting the covers

Altri manuali per MX300 G2

Indice

Altri manuali Cisco Sistema di conferenza

Cisco

Cisco TelePresence SX20N Manuale utente

Cisco

Cisco TelePresence SX20 Manuale di servizio

Cisco

Cisco TelePresence SX10 Manuale di servizio

Cisco

Cisco EX90 Manuale utente

Cisco

Cisco UNIFIED COMMUNICATIONS UC320W Manuale di istruzioni

Cisco

Cisco TelePresence IX5000 Manuale utente

Cisco

Cisco Quick Set C20 Manuale di servizio

Cisco

Cisco Service Manual Manuale utente

Cisco

Cisco EX90 Manuale utente

Cisco

Cisco TelePresence DX80 Manuale utente

Cisco

Cisco Telepresence MX200 Manuale di servizio

Cisco

Cisco Webex DX70 Manuale di servizio

Cisco

Cisco Nexus 92300YC Manuale

Cisco

Cisco 3545 MCU Manuale di installazione e funzionamento

Cisco

Cisco TelePresence SX10 Manuale utente

Cisco

Cisco Webex Codec Pro Manuale utente

Cisco

Cisco EX60 Manuale utente

Cisco

Cisco Quick Set C20 Manuale di servizio

Cisco

Cisco Telepresence MX800 Manuale utente

Cisco

Cisco TelePresence System Codec C90 Manuale utente

Cisco

Cisco Quick Set C20 Manuale utente

Cisco

Cisco Webex Share Manuale utente

Cisco

Cisco MX200 G2 Manuale utente

Cisco

Cisco SX80 Manuale di servizio

Manuali Sistema di conferenza popolari di altre marche

Kramer

Kramer VIA GO Manuale utente

AVT

AVT MAGIC AC1 Go Manuale utente

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Manuale utente

Sony

Sony PCS-I150 Manuale utente

Middle Atlantic Products

Middle Atlantic Products VTC Series Manuale utente

Prentke Romich Company

Prentke Romich Company Vanguard Plus Guida

Speakerbus

Speakerbus iD 712 Manuale utente

Trelleborg

Trelleborg SafePilot CAT PRO Manuale utente

Sennheiser

Sennheiser ADN Manuale utente

ADTRAN

ADTRAN NetVanta 7100 Manuale utente

AINA

AINA PTT Voice Responder Manuale utente

Yamaha

Yamaha ProjectPhone PJP-100H Manuale utente

vissonic

vissonic VLI Series Manuale utente

Panasonic

Panasonic KX-VC500 Manuale utente

Poly

Poly Trio 8300 Manuale utente

Crestron

Crestron Mercury CCS-UCA-SMK Disegno dimensionale

Inmarsat

Inmarsat mini M Manuale utente

Tenveo

Tenveo ALL-IN-ONE Manuale utente