Cisco Small Business RV215W Manuale utente

Quick Start Guide

Cisco RV215W Wireless-N VPN Firewall

Package Contents

•Wireless-N VPN Firewall

•Ethernet Cable

•Power Adapter

•Quick Start Guide

•Documentation and Software on CD-ROM

2 Cisco RV215W Wireless-N VPN Firewall

Welcome

Thank you for choosing the Cisco RV215W Wireless-N VPN Firewall.

This guide describes how to physically install your Cisco RV215W and

launch the web-based Device Manager.

Mounting the Cisco RV215W

Placement Tips

To prevent the firewall from overheating or being damaged:

• Ambient Temperature—Do not operate it in an area that exceeds an

ambient temperature of 104°F (40°C).

•AirFlow—Be sure that there is adequate air flow around the firewall.

• Mechanical Loading—Be sure that the firewall is level and stable to

avoid any hazardous conditions.

Place the device on a flat surface so that it sits on its four rubber feet.

Cisco RV215W Features

Front Panel

Power Solid green when the device is powered on and

booted.

Flashes green when the device is booting or

loading the firmware.

USB Solid green when the USB dongle is recognized

and the USB drive is ready.

Flashes green every second when the USB

dongle is successfully connected to the Internet

Service Provider (ISP) and the port is receiving

and sending data.

Flashes every 3 seconds when an error is

detected and the USB dongle is not recognized.

Off when no USB device is connected.

Cisco RV215W Wireless-N VPN Firewall 3

Back Panel

RESET—The RESET button has two functions:

•To reboot the unit and retain the current configuration, press and hold

RESET for at least 3, but no more than 10 seconds, by using a paper clip

or a pen tip.

•To reboot the unit and restore the factory default configuration, press

and hold in the RESET button for more than 10 seconds. Changes you

have made to the Cisco RV215W configuration are lost.

LAN (1-4)—RJ-45 device connections to link local area network devices,

such as PCs, print servers, or switches, to the firewall.

WAN (Internet)—Internet device connection for connecting the firewall to a

wide area network device, such as a cable or DSL modem.

POWER—Switch that toggles power to the device on or off.

12VDC—Power port that connects the firewall to the provided 12VDC

power adapter.

WAN Solid green when the firewall is connected to the

Internet by using a wired connection.

Off when it is not connected to the Internet or it is

connected by using a USB dongle.

Flashes when it is sending or receiving data over

the wired connection.

Wireless Off when the wireless radio is disabled (switched

off).

Flashes green when the wireless radio is

transmitting or receiving data.

The button, when held for 5 seconds or more,

switches the wireless radio on or off. The button

and the LED is solid green when the wireless

radio is enabled (switched on).

LAN (1-4) The numbered lights correspond to the LAN

ports on the back panel.

Lit green when the corresponding port is

connected to a device. Flashes green when the

port is sending or receiving data.

4 Cisco RV215W Wireless-N VPN Firewall

Side Panel

USB—Type A USB port on the right side of the housing that supports

3G/4G/LTE USB dongles.

Connecting the Equipment

You must connect a PC to the firewall by using an Ethernet cable to

perform the initial configuration. After the initial configuration,

administrative tasks can be performed through the network or by using a

wireless connection.

To connect a PC to the Cisco RV215W for initial configuration:

Step 1 Power off all equipment, including the cable or DSL modem, the PC,

and the Cisco RV215W.

Step 2 Use an Ethernet cable to connect your cable or DSL modem to the

WAN port on the firewall.

Step 3 Connect another Ethernet cable from one of the LAN (Ethernet)

ports to the Ethernet port on the PC.

Step 4 Power on the cable or DSL modem and wait until the connection is

active.

Step 5 Connect the power adapter to the firewall 12VDC port.

Caution Use only the power adapter that is supplied with the firewall.

Using a different power adapter could damage the device.

The POWER button is on by default. The power light on the front

panel is solid green when the power adapter is connected

properly and the firewall is finished booting.

Step 6 Plug the other end of the adapter into an electrical outlet. Use the

plug (supplied) specific to your country.

Step 7 Continue with the instructions in the Using the Setup Wizard to

configure the firewall.

Cisco RV215W Wireless-N VPN Firewall 5

Using the Setup Wizard

The Setup Wizard and Device Manager are supported on Microsoft

Internet Explorer 6.0 or later, Mozilla Firefox 3.0 or later, and Apple Safari 3.0

or later. To configure the firewall by using the Setup Wizard:

Step 1 Power on the PC that you connected to the LAN1 port in Step 3 of

the Connecting the Equipment section. Your PC becomes a DHCP

client of the firewall and receives an IP address in the 192.168.1.xxx

range.

Step 2 Launch a web browser window on your PC.

Step 3 In the address bar, enter the default IP address of the firewall,

192.168.1.1. A site security certificate message displays. The

Cisco RV215W uses a self-signed security certificate. This

message appears because the firewall is not known to your PC.

Step 4 Click Continue to this website (or the option shown on your

particular web browser) to continue. The login page appears.

Step 5 Enter the username and password. The default username is cisco.

The default password is cisco. Passwords are case sensitive.

Step 6 Click Log In. The Router Setup Wizard is launched.

Step 7 Follow the on-screen instructions to set up your firewall. The

Router Setup Wizard tries to automatically detect and configure

your connection. If it is unable to do so, it might ask you for some

information about your Internet connection. Contact your ISP for

this information.

Step 8 Change the password as instructed by the Router Setup Wizard or

follow the instructions the Changing the Administrator Username

and Password section. You are required to log into the device with

the new username and password.

The Device Manager Getting Started page appears. It displays the

most common configuration tasks.

Step 9 Click one of the listed tasks or a task listed in the navigation bar to

complete the configuration.

Step10 Save any additional configuration changes and log out of Device

Manager.

6 Cisco RV215W Wireless-N VPN Firewall

Changing the Administrator Username and Password

To change the administrator username and password on the firewall:

Step 1 From the Getting Started page, select Change Default

Administrator Password or select Administration > Users.

Step 2 Check Edit Admin Settings.

Step 3 Enter a new username in Administrator Account Settings. We

recommend that you do not use cisco.

Step 4 Enter the old password.

Step 5 Enter the new password. Passwords should not contain dictionary

words from any language or be the default password. They should

contain a mix of uppercase and lowercase letters, numbers, and

symbols. Passwords must be at least 8 but no more than 30

characters in length.

Step 6 Enter the new password again to confirm.

Step 7 Click Save.

Cisco RV215W Wireless-N VPN Firewall 7

Where to Go From Here

For EU lot 26 related test result, please check this web page:

www.cisco.com/go/eu-lot26-results.

Support

Cisco Support

Community

www.cisco.com/go/smallbizsupport

Cisco Support and

Resources

www.cisco.com/go/smallbizhelp

Phone Support Contacts www.cisco.com/en/US/support/

tsd_cisco_small_business

_support_center_contacts.html

Cisco Firmware

Downloads

www.cisco.com/go/smallbizfirmware

Select a link to download firmware for Cisco

products. No login is required.

Cisco Open Source

Requests

www.cisco.com/go/

smallbiz_opensource_request

Cisco Partner Central

(Partner Login Required)

www.cisco.com/web/partners/sell/smb

Product Documentation

Cisco RV215W

Administration Guide

www.cisco.com/go/rv215w

Americas Headquarters

Cisco Systems, Inc.

www.cisco.com

Cisco has more than 200 offices worldwide.

Addresses, phone numbers, and fax numbers

are listed on the Cisco website at

www.cisco.com/go/offices.

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates

in the U.S. and other countries. To view a list of Ciscotrademarks, go to this URL:

www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their

respective owners. The use of the word partner does not imply a partnership relationship

between Cisco and any other company. (1110R)

78-20778-03C0

Printed in China PRC

Altri manuali per Small Business RV215W

Indice

Altri manuali Cisco Firewall

Cisco

Cisco 5505 - ASA Firewall Edition Bundle Manuale

Cisco

Cisco LightStream 1010 Istruzioni per l'installazione

Cisco

Cisco 3100 Series Manuale

Cisco

Cisco Small Business RV215W Manuale di istruzioni

Cisco

Cisco Small Business RV220W Manuale utente

Cisco

Cisco RV110W Manuale di istruzioni

Cisco

Cisco Firepower 1600 Manuale

Cisco

Cisco 2100 Series Manuale utente

Cisco

Cisco ASA 5506-X Istruzioni per l'installazione

Cisco

Cisco M170 Manuale utente

Cisco

Cisco Spam Manuale utente

Cisco

Cisco Small Business RV220W Manuale di istruzioni

Cisco

Cisco ASA 5506-X Manuale utente

Cisco

Cisco Firepower 1010 Manuale

Cisco

Cisco PIX 501 Manuale utente

Cisco

Cisco C170 Manuale utente

Cisco

Cisco ASA 5550 Series Manuale utente

Cisco

Cisco RV110W Manuale utente

Cisco

Cisco Cisco ASA 5510 Manuale utente

Cisco

Cisco RV120W Manuale utente

Cisco

Cisco 5505 - ASA Firewall Edition Bundle Manuale utente

Cisco

Cisco Small Business RV215W Manuale utente

Cisco

Cisco FirePOWER 7000 Manuale utente

Cisco

Cisco RV110W Manuale utente

Manuali Firewall popolari di altre marche

Fortinet

Fortinet FortiGate Voice Series Manuale utente

ADTRAN

ADTRAN NetVanta 2300 Manuale utente

SecureLogix

SecureLogix ETM System Manuale utente

NETGEAR

NETGEAR ProSafe FVX538 Manuale utente

Lanner

Lanner FW-8877 Manuale utente

Huawei

Huawei USG6000 Series Manuale di installazione e funzionamento

H3C

H3C SecPath F5000-AI-15 Manuale utente

Nexcom

Nexcom DNA 1150 Manuale utente

Fortinet

Fortinet FortiGate-60 series Manuale utente

Draytek

Draytek Vigor2860 Series Manuale utente

Lanner electronics

Lanner electronics FW-7650 Series Manuale utente

Swisscom

Swisscom Internet Backup Manuale utente

SonicWALL

SonicWALL NSa 5700 Manuale utente

DPtech

DPtech FW1000 SERIES Manuale utente

FEITIAN

FEITIAN MultiPass FIDO Manuale utente

EBLOCKER

EBLOCKER PRO Manuale utente

GTA

GTA GB-200 Manuale utente

Trend Micro

Trend Micro Deep Edge Manuale utente