Cisco Meraki Go Istruzioni operative

Meraki Go - Troubleshooting Tools

Meraki Go provides multiple Troubleshooting Tools to assist you in performing troubleshooting on your network. This document will go over each of the tools,

how they should be used, and what actions you can take from them.

Accessing Troubleshooting Tools

To access the troubleshooting tools, you’ll want to browse to the Hardware section on the bottom navigation bar. From there, you can select the access point

that you want to troubleshoot. On the hardware details page, you should see a section called Troubleshooting tools.

Test Connection

The Test Connection tool allows you to validate that the access point is able to either

a. reach the Meraki Go cloud, or

b. reach a specific website that you have specified

The tool will return both average latency and loss rate, and in a situation where neither of these are in an ideal state, will provide some actionable items you can

take.

Blink LED

Sometime you may have forgotten which access point is installed where, and need to identify it without wanting to remove it from the wall. In this situation, the

Blink LED tool will allow you to set the LED that is installed on each Meraki Go access point to blink, making it identifiable.

Reboot

If you ever feel the need to remotely turn your Meraki Go access point off and on again, you are able to do so with the Reboot tool. If any clients are connected