Cisco RV180 Manuale utente

Altri manuali per RV180

4

Questo manuale è adatto per i seguenti modelli

1

Indice

Altri manuali Cisco Router di rete

Cisco

Cisco IR1101 Manuale

Cisco

Cisco ASR 903 Manuale utente

Cisco

Cisco VIC-2FXO - 3600 Voice Interface Card-Fxo... Istruzioni originali

Cisco

Cisco uBR924 Manuale utente

Cisco

Cisco Linksys WRT610N Manuale utente

Cisco

Cisco NCS 5500 Series Manuale utente

Cisco

Cisco ASR 900 Series Manuale utente

Cisco

Cisco 2431 - IAD Router Manuale

Cisco

Cisco 1417 Manuale utente

Cisco

Cisco 700 series Guida all'installazione

Cisco

Cisco 1760V Manuale utente

Cisco

Cisco o SOHO 77H Manuale utente

Cisco

Cisco 3640 Series Manuale utente

Cisco

Cisco 809 Guida rapida

Cisco

Cisco Nexus 9000 Series Manuale utente

Cisco

Cisco 851-K9 - 851 Integrated Services Router Manuale utente

Cisco

Cisco Catalyst 2960 Series Manuale utente

Cisco

Cisco 826 Manuale utente

Cisco

Cisco Linksys EA2700 Manuale utente

Cisco

Cisco Performance Routing Engine 5 Manuale utente

Cisco

Cisco ASR 1000 Series Manuale utente

Cisco

Cisco SPS2024 Manuale utente

Cisco

Cisco WRT54G Manuale utente

Cisco

Cisco ISR G2 Series Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

EnGenius

EnGenius ESR-9710 Manuale utente

LevelOne

LevelOne FBR-1416 Manuale utente

Dynacord

Dynacord Promatrix 6000 Manuale utente

Lorex

Lorex F5D8230-4 Manuale utente

WAN Configuration on RV180 AND RV180W

Objectives

This document explains how to configure the IPv4 WAN(Internet) for use with a Static IP on

the RV180 and RV180W.

Static IP is for use with internet providers who assign the user a permanent IP address.

Using a static IP is less secure because the IP address is always the same, however it is

more dependable for some services. Such as Voice over Internet Protocol(VOIP) or if you

using the computer for a server.

Applicable Devices

• RV180

• RV180W

Steps of Procedure

Step 1. Use the router configuration utility to choose Networking > WAN(Internet) > IPv4

WAN (internet). The IPv4 WAN (internet) page opens.

Step 2. Choose the Static IP option from the Internet Connection Type drop-down menu.

Step 3. Enter the information in the corresponding fields.

• IP Address— The IP address used by the WAN port.

• Subnet Mask— The sub-net mask used by the WAN port.

• Default Gateway

• Primary DNS Server

• Secondary DNS Server— (Optional) For use if you have a secondary DNS server in

place.

Step 3. Choose the MTU Type.

• Default— Default value is 1500 Bytes.

• Custom— Custom enable you to enter a custom MTU size(bytes) value in the MTU Size

field

Step 4. Choose the MAC Address Source from the drop-down list.

• Use Default Address— Uses the defaults MAC address.

• Use This Computer's Address— Uses the MAC address your computer currently has.

• Use this MAC— Allows you to enter a specific MAC Address.

• Enter a MAC address in the field.

Step 6. Click Save to save the changes.

PPPoE Configuration

NOTE: If you have a PPPoE connection, first create your PPPoE profile on the Networking

> WAN > PPPoE Profiles page.

Step 1. Use the router configuration utility to choose Networking > WAN(Internet) > IPv4

WAN (internet). The IPv4 WAN (internet) page opens.

Step 2. Choose the PPPoE option from the Internet Connection Type drop-down menu.

Step 3. Choose PPPoE Profile name to be used from the drop down menu.

Step 4. Choose the MTU Type.

• Default— Default value is 1500 Bytes.

• Custom— Custom enable you to enter a custom MTU size(bytes) value in the MTU Size

field.

Step 5. Choose the MAC Address Source from the drop-down list.

• Use Default Address— Uses the defaults MAC address.

• Use This Computer's Address— Uses the MAC address your computer currently has.

• Use this MAC— Allows you to enter a specific MAC Address.

Step 6. Click Save to save the changes.

PPTP Configuration

Step 1. Use the router configuration utility to choose Networking > WAN(Internet) > IPv4

WAN (internet). The IPv4 WAN (internet) page opens.

Step 2. Choose the PPTP option from the Internet Connection Type drop-down menu.

Step 3. Enter the Username and password in the User name and Password fields

respectively provided by the ISP.

Step 3. (Optional) Check Enable for MPPE Encryption.

Step 4. (Optional) Click Connection Type to idle Time and enter idle time in minutes.

Note: WAN (internet) Idle Time out will not work if Bonjour is enabled in Discover-Bonjour

Page.

Step 5. Enter the My IP Address provided by ISP.

• Server IP Address — Enter the PPTP server ip address.

Step 6. Choose the MTU Type.

• Default— Default value is 1500 Bytes.

• Custom— Custom enable you to enter a custom MTU size(bytes) value in the MTU Size

field.

Step 7. Choose the MAC Address Source from the drop-down list.

• Use Default Address— Uses the defaults MAC address.

• Use This Computer's Address— Uses the MAC address your computer currently has.

• Use this MAC— Allows you to enter a specific MAC Address.

Step 8. Click Save to save the changes.

L2TP Configuration

Step 1. Use the router configuration utility to choose Networking > WAN(Internet) > IPv4

WAN (internet). The IPv4 WAN (internet) page opens.

Step 2. Choose L2TP from Internet Connection Type drop-down menu.

Step 3. Enter Username and Password in the User name and Password fields

respectively provided by the ISP.