Cisco SGE2000 Manuale utente
LINKSYS ONE COMMUNICATIONS SOLUTION
SGE2000/SGE2000P Gigabit Ethernet
Switch Reference Guide
December 2007
© 2006-2007 Copyright 2006-2007, Cisco Systems, Inc.
Specifications are subject to change without notice.
Linksys, the Cisco Systems logo, the Linksys Logo, and the Linksys One logo are registered trademarks of Cisco Systems,
Inc. All other trademarks mentioned in this document are the property of their respective owners.
Document Revision History
Revision Date Description
1.0 December 2007 Added switch stacking information.
1
Contents
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Contents
Contents
Chapter 1: Getting Started . . . . . . . . . . . . . . . . . . . 1
Starting the Application 1
Understanding the Interface 4
Device Representation 5
Using the Linksys Management Buttons 6
Using Screen and Table Options 7
Adding Device Information 7
Modifying Device Information 7
Deleting Device Information 8
Resetting the Device 9
Logging Off The Device 9
Chapter 2: Managing Device Information . . . . . . . . . . . . . 11
Understanding the Device Zoom View 11
Defining General System Information 12
SGE 2000P System Information 12
Managing Stacks 13
Building Automatically-Configured Stacks 14
Building a New Stack 14
Adding Units to a Running Stack 14
Building Manually-Configured Stacks 14
Building a New Stack 14
Adding Units to a Running Stack 14
Understanding Stack Resiliency 15
Understanding Advanced Stacking 15
Unit IDs 15
Stack Master 15
Stack Backup Master 15
Stack Members 16
Master-Enabled Units 16
Unit ID Allocation 16
Stack Unit Startup Process 17
Master Discovery Process 17
Master Election Process 17
Unit ID Allocation and Duplicate Unit ID Conflict Resolution 18
Configuring Units and Ports 19
Setting the Unit’s Operational Mode 19
Configuring the Stack Master and Unit ID 19
Resetting the Unit to Factory Default Mode 21
Understanding LED Indicators 21
Stack Troubleshooting and Maintenance 21
Replacing a Failed Member Stack Unit in an Operational Stack 21
Replacing a Failed Stack Master Unit in an Operational Stack 23
2Contents
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Contents
Splitting a Stack 24
The Stack Master and Backup Master Units Remain in a Group 24
The Stack Master or the Backup Master Unit Remains in a Group 24
Neither the Stack Master Unit or the Backup Master Unit Remains in the Group 25
Merging Two Stacks 26
Understanding Stacking Cable Failure 27
Inserting Too Many Units into a Stack 27
Inserting a Standalone Unit into a Running Stack 28
Viewing Device Health 28
Chapter 3: Managing Power-over-Ethernet Devices . . . . . . . . . 31
DefiningPoE System Information 31
Chapter 4: Configuring Device Security . . . . . . . . . . . . . . 37
Passwords Management 38
Defining User Authentication 38
Defining Authentication 40
Defining Profiles 40
Mapping Profiles 42
Defining TACACS+ 43
Defining RADIUS 47
Defining Access Method 51
Defining Access Profiles 51
Defining Profile Rules 54
Defining Traffic Control 60
Defining Storm Control 60
Defining Port Security 62
Defining 802.1x 66
Defining 802.1X Properties 67
Defining Port Authentication 68
Defining Multiple Hosts 71
Defining Authenticated Host 74
Defining Access Control 75
Defining MAC Based ACL 75
Defining IP Based ACL 77
Defining ACL Binding 84
Defining DOS Prevention 85
Global Settings 85
Defining Martian Addresses 87
Chapter 5: Configuring Device Interfaces . . . . . . . . . . . . . 89
Defining Port Settings 89
Defining LAG Management 94
Defining LAG Settings 96
Configuring LACP 99
3
Contents
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Contents
Chapter 6: Configuring VLANs . . . . . . . . . . . . . . . . 103
Defining VLAN Properties 104
Defining VLAN Membership 106
Defining Interface Settings 108
Configuring GVRP Settings 111
Protocol Group 114
Protocol Port 116
Chapter 7: Configuring IP Information . . . . . . . . . . . . . 119
Domain Name System 120
Defining DNS Server 120
Host Mapping 122
Configuring Layer 2 124
Configuring IP Addressing: 124
IP Interface 124
ARP 125
Configuring Layer 3 129
Configuring IP Addressing 129
IP Interface 129
ARP Proxy 132
UDP Relay 133
DHCP Relay 136
ARP 137
Defining IP Routing 140
Chapter 8: Defining Address Tables . . . . . . . . . . . . . . 143
Defining Static Addresses 144
Defining Dynamic Addresses 146
Chapter 9: Configuring Multicast Forwarding . . . . . . . . . . 149
IGMP Snooping 149
Defining Multicast Bridging Groups 152
Defining Multicast Forwarding 155
Chapter 10: Configuring Spanning Tree . . . . . . . . . . . . . 157
Defining STP on Interfaces 158
Defining Interface Settings 160
Defining Rapid Spanning Tree 164
Defining Multiple Spanning Tree 168
Defining MSTP Properties 169
Instance to VLAN 170
Instance Settings 170
Interface Settings 171
Chapter 11: Configuring SNMP . . . . . . . . . . . . . . . . 177
SNMP v1 and v2 177
4Contents
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Contents
SNMP v3 177
Configuring SNMP Security 178
Defining Engine ID 178
Defining SNMP Views 179
Defining SNMP Users 181
Define SNMP Groups 183
Defining SNMP Communities 185
Defining Trap Management 189
Defining Trap Settings 189
Configuring Station Management 190
Defining SNMP Filter Settings 196
Chapter 12: Configuring Quality of Service . . . . . . . . . . . .199
Defining General Settings 200
Defining CoS 201
Defining Queue 202
Mapping CoS to Queue 204
Mapping DSCP to Queue 205
Configuring Bandwidth 205
Defining Advanced Mode 208
Configuring DSCP Mapping 208
Defining Class Mapping 209
Defining Aggregate Policer 211
Configuring Policy Table 214
Defining Policy Binding 217
Defining QoS Basic Mode 219
Chapter 13: Managing System Files . . . . . . . . . . . . . . .221
File Management Overview 221
Firmware Upgrade 222
Save Configuration 223
Copy Files 224
Active Image 225
Chapter 14: Managing System Logs . . . . . . . . . . . . . . .227
Enabling System Logs 227
Viewing the Device Memory Logs 229
Clearing Message Logs 229
Viewing the Flash Logs 230
Clearing Message Logs 230
Viewing Remote Logs 231
Chapter 15: Configuring System Time . . . . . . . . . . . . . .235
Defining System Time 236
Defining SNTP Settings 238
Defining SNTP Authentication 240
5
Contents
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Contents
Chapter 16: Viewing Statistics . . . . . . . . . . . . . . . . . 243
Viewing Ethernet Statistics 243
Defining Ethernet Interface 243
Resetting Interface Statistics Counters 245
Viewing Etherlike Statistics 245
Resetting Etherlike Statistics Counters 247
Viewing GVRP Statistics 247
Resetting GVRP Statistics Counters 249
Viewing EAP Statistics 249
Managing RMON Statistics 252
Viewing RMON Statistics 253
Resetting RMON Statistics Counters 254
Configuring RMON History 255
Defining RMON History Control 255
Viewing the RMON History Table 258
Configuring RMON Events 259
Defining RMON Events Control 259
Viewing the RMON Events Logs 262
Defining RMON Alarms 263
Chapter 17: Managing Device Diagnostics . . . . . . . . . . . . 269
Viewing Integrated Cable Tests 269
Performing Optical Tests 271
Configuring Port Mirroring 272
Defining CPU Utilization 275
Appendix A: Linksys One Contact Information . . . . . . . . . . 277
6Contents
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Contents
1
Chapter 1: Getting Started
Starting the Application
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Chapter
1
Getting Started
This section provides an introduction to the user interface, and includes the following topics:
• Starting the Application
•Understanding the Interface
• Using the Linksys Management Buttons
• Using Screen and Table Options
• Resetting the Device
• Logging Off The Device
Starting the Application
This section contains information for starting the Linksys User Interface.
Note By default, the IP address of the device is assigned dynamically. The IP address can be changed.
It is recommended to configure the IP address statically, if the system is in stack mode, in order to
prevent the user from disconnecting from the network in the event of master switchover.
To open the User Interface:
1. Open a web browser.
2. Enter the device’s IP address in the address bar and press Enter. An Appendix 1, "Enter Network
Password Page" opens:
2Chapter 1: Getting Started
Starting the Application
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Chapter
1
Enter Network Password Page
3. Enter a user name and password. The default user name is "admin". The device is not configured
with a default password, and can be configured without entering a password. Passwords are both
case sensitive and alpha-numeric.
4. Click Login The Embedded Web System Home Page opens:
Note If you have logged in automatically via the Service Router user interface, the Tree and Device
views appear and allow you to navigate through the various areas of the web interface. However,
the following page will appear within the frame provided by the Service Router user interface.
Altri manuali per SGE2000
3
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali Cisco Router di rete
Cisco
Cisco vEdge Series Manuale
Cisco
Cisco Linksys WRT54GCV2 Manuale utente
Cisco
Cisco Small Business RV315W Manuale utente
Cisco
Cisco CRS Manuale operativo
Cisco
Cisco ASR 14000 Series Manuale di installazione
Cisco
Cisco ASR 9000 Serie Manuale utente
Cisco
Cisco SOHO 91 Manuale utente
Cisco
Cisco RVS4000 - Gigabit Security Router Manuale di istruzioni
Cisco
Cisco cBR 8 Manuale utente
Cisco
Cisco Linksys WRT54G3GV2-ST Manuale utente
Cisco
Cisco 800 Series Guida
Cisco
Cisco RV130 Manuale di installazione e funzionamento
Cisco
Cisco 1721 - VPN Security Router Bundle Manuale
Cisco
Cisco RV016 - Small Business - 10/100 VPN Router Manuale di istruzioni
Cisco
Cisco 5100 Manuale
Cisco
Cisco ASR-920-12SZ-IM Manuale utente
Cisco
Cisco CGR 1240 Manuale utente
Cisco
Cisco 2801 - Integrated Services Router Manuale utente
Cisco
Cisco 10000 Series Manuale utente
Cisco
Cisco uBR7100 Series Manuale
