Cisco MS410-16 Manuale utente

MS410 Series Installation Guide

Models

Model number Description

MS410-16

Layer-3 16-port 1Gbe SFP and 2-port

10Gbe SFP+ aggregation switch with 1

management interface and hot-swappable power

supplies / fans

MS410-32

Layer-3 32-port 1Gbe SFP and 4-port 10Gbe

SFP+ aggregation switch with 1 management

interface and hot-swappable power supplies / fans

Package contents

In addition to the MS switch, the following are provided (mounting kit provided with 1U models only):

Rack Mount Kit includes:

• US 12-24 mounting screws and cage nuts, 5 of each

• INTL M5 mounting screws and cage nuts, 5 of each

• INTL M6 mounting screws and cage nuts, 5 of each

• Mounting washers

MS410-16 Series front panel

MS410-32 Series front panel

Power input The MS comes standard with US power cord. EU/

UK/AU power cords may be ordered separately.

MS410 Series Back Panel

Ports and Status Indicators

The MS uses LEDs to inform the user of the device's status. When the device powers on, the main LED will be amber.

Additional functions are described below, from left to right.

Item Function LED Status Meaning

1 Restore N/A

Restore button to clear

switch IP and local

configuration settings

2 Fan Orange

One or more of the

system fans has

malfunctioned or is

missing

3 Power (PSU) Orange

One of the system

PSUs (power supplies)

has malfunctioned or is

missing

2Status Orange

Switch is unable to or

has not yet connected

to the Meraki cloud

Flashing green Firmware upgrade in

process

White

Switch is fully

operational and

connected to the

Meraki cloud

Alternating

Switch is booting,

searching for uplink to

Meraki Cloud

Off Switch does not have

power

3 Switch Port LEDs Off No client connected

Solid orange 10/100/1000 Mbps

Solid green 10,000 Mbps (10Gbps)

In addition, there is a RESTORE button available on the front panel.

Insert a paper clip if a restore is required.

• A brief, momentary press: To delete a downloaded configuration and reboot.

• Press and hold for more than 10 sec: To force the unit into a full factory restore.

Management Port

This port is designed to access the local switch configuration page only. For more information on local configuration,

please see Local Configuration.

The management port can not be used as a standard switched port

The MS410 series will ship with all fans and a single power supply included. Any additional parts, including fans and

power supplies, can be purchased separately.

Equipment is to be used only in a restricted access location and installed/operated only by trained service personnel.

Bringing your Stack Online

When connecting up your MS410 stack the recommended cabling method is to connect one uplink and then connect the

stacking cables from stack port 1 to stack port 2 of the next switch. When at the bottom switch stack port 1 should

connect back up to stack port 2 of the top switch. With this setup the switches will be able to connect to dashboard and

update themselves and received any configuration necessary. Once the switches are up to date you may cable and

configure as necessary.

It's recommended for bring-up to connect all of the stacking cables and a single uplink on the stack before powering the

switches on. This will allow all switches to connect and download any necessary firmware and configuration. The Status

LED will blink during firmware updates so that it will be visible if a switch is upgrading. Once all switches have had a

chance to update and are displaying solid White Status LEDs feel free to connect up the rest of the cables. More

information on dashboard for stacks can be found here.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Cisco Sistema di sicurezza

Cisco

Cisco ISA550 Manuale di istruzioni

Cisco

Cisco Firepower 2100 Series Manuale

Cisco

Cisco 6400E Manuale utente

Cisco

Cisco ASA 5506W-X Manuale

Cisco

Cisco C395 Manuale

Cisco

Cisco ASA 55 Series Guida rapida

Cisco

Cisco Codec C Series Manuale utente

Cisco

Cisco ISA 3000 Manuale dell'operatore

Cisco

Cisco Meraki MX67 Manuale utente

Cisco

Cisco MARS Istruzioni per l’uso

Cisco

Cisco PIX-515-RPS - PIX 515-R - Firewall Manuale utente

Cisco

Cisco Firepower 1100 Series Manuale utente

Cisco

Cisco PIX 525 Manuale utente

Cisco

Cisco PIX 501 - Security Appliance Manuale utente

Cisco

Cisco 500 Series Manuale utente

Cisco

Cisco NCS 4000 Series Manuale utente

Cisco

Cisco MEDVIEW-C-30XS-A01 Manuale utente

Cisco

Cisco ISA 3000 Manuale utente

Cisco

Cisco WVC200 - Wireless-G PTZ Internet Camera Manuale di istruzioni

Cisco

Cisco IronPort S670 Manuale utente

Cisco

Cisco C195 Guida rapida

Cisco

Cisco M5 Manuale utente

Cisco

Cisco Firepower 2100 Series Manuale

Cisco

Cisco 4116 - EtherFast Switch Guida

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente