Citizen CLP-621 Manuale utente

Technical Manual

CLP-621 & CLP-631

Thermal Transfer Barcode & Label Printer

JM74961-00F

1.00E-0701

CLP-621 & CLP-631 ii

CHAPTER 1SPECIFICATIONS

CHAPTER 2 OPERATING PRINCIPLE

CHAPTER 3 DISASSEMBLY AND MAINTENANCE

CHAPTER 4TROUBLESHOOTING

CHAPTER 5 PARTS LISTS

CHAPTER 6 CIRCUIT DIAGRAMS

APPENDICES

iii

CLP-621 & CLP-631

CHAPTER 1

SPECIFICATIONS

CLP-621 & CLP-631

CHAPTER 1 SPECIFICATIONS

TABLE OF CONTENTS

1-1. General Specifications ....................................................................................................1-3

1-2. Printable Area .................................................................................................................1-7

1-3. Printing Position Accuracy ..............................................................................................1-8

1-4. Adjustable Sensors .........................................................................................................1-9

CLP-621 & CLP-631 1-2

1-1. General Specifications

1-3 CLP-621 & CLP-631

Printing

Printing method Thermal transfer/Direct thermal

Main scanning line density: 203 dots/inch (8 dots/mm) (CLP-621)

300 dots/inch (11.8 dots/mm) (CLP-631)

Sub-scanning line density: 203 dots/inch (8 dots/mm) (CLP-621)

300 dots/inch (11.8 dots/mm) (CLP-631)

Resolution

Head 864 dots (effective dots: 832 dots) (CLP-621)

Head 1275 dots (effective dots: 1240 dots) (CLP-631)

Max. print width 104 mm (CLP-621)

105 mm (CLP-631)

4.1 inch

Max. print length 812.8 mm 32 inch

Print density Print density is adjustable with software

Printing speed setting 4, 3 or 2 inches per second.

Print mode

Batch mode Normal printing (single or multiple sheets)

Tear off mode Feeds back media to the tear-off position after printing is completed.

Cut mode *1Prints while cutting at designated sheet units.

The following two kinds of cut mode operations are available.

• Backfeed

• Cut through

(Cut through refers to stopping present printing to cut the previous

label when it reaches the cut position. After cutting, printing restarts

but a gap may be created at the seam of the printing at this time.)

Peel mode*2Peels labels from the liners after printing them.

Media

Types of media Roll, fanfold

(continuous media, die-cuts, continuous tags, paper or tickets)

Recommended media Thermal-transfer: label media (RP050 Ricoh)

Direct thermal media: label media (140LAB Ricoh)

tag media (TB2E0V, Mitsubishi Paper)

Max. media width 118.0 mm 4.65"

Min. media width 19.5 mm 0.77"

Min. label width 19.5 mm 0.77"

Min. label pitch*36.35 mm 0.25"

*1,*2: Options can be separately purchased.

*3: When a media pitch of less than 1" is used, set the "Small Media Adjustment" setting in

the "Page Setup" menu to "ON".

1-1. General Specifications

CLP-621 & CLP-631 1-4

Media (continued)

Max. media thickness 0.254 mm 0.01"

Max. media length 812.8 mm 32"

Min. media length 6.35 mm 0.25"

Min. media thickness 0.0635 mm 0.0025"

Max. external diameter:

127mm

5"On-board roll media

diameter

Media core: 25.4 to 76mm 1 to 3"

Ribbon

Recommended ribbon B110A Ricoh

Max. ribbon width 114.0 mm 4.50"

Min. ribbon width 25.4 mm 1.00"

Min. ribbon length 360.0 m 1,181 ft

Max. roll diameter 74.0 mm 2.90"

Inner diameter of the

paper tube

25.4 ±0.25 mm 1.00 ±0.01"

Ribbon end detection Ribbon out detection by a tension sensor

Bar code

One-dimension • Code 3 of 9 • UPC-A • UPC-E • EAN-13 (JAN-13)

• EAN-8 (JAN-8) • Interleaved 2 of 5 • Code 128

• HIBC (Modulus 43-used code 3 of 9) • Codabar (NW-7)

• Int 2 of 5 (Modulus 10-used Interleaved 2 of 5) • Plessey

• Case Code • UPC 2DIG ADD • UPC 5DIG ADD

• Code 93 • Telepen • ZIP • UCC/EAN 128

• UCC/EAN128 (for K-MART)

• UCC/EAN128 Random Weight • FIM

Two-dimension UPS Maxi Code, PDF-417, Data Matrix, QR Code,

Aztec (CLP-631 only), RSS (CLP-631 only)

1-1. General Specifications

1-5 CLP-621 & CLP-631

Font

1. Seven kinds of fixed pitch font

Overseas, English fonts and European fonts

2. OCR fonts

OCR-A*4, OCR-B*4

3. Proportional fonts

CG Triumvirate smooth font

CG Triumvirate Bold smooth font

(6, 8, 10, 12, 14, 18, 24, 30, 36, 48 points: CLP-621)

(4, 5, 6, 8, 10, 12, 14, 18, 24, 30, 36, 48 points: CLP-631)

• Character set: Conforms with code page 850 standards

4. TrueTypeTM rasterizer *5

Control language

Conforms to Datamax®programming language*6

Outline of electronic devices

CPU 32-bit RISC CPU

ROM Standard equipment: FLASH ROM 2M bytes

RAM Standard equipment: SDRAM 8M bytes

Media detection sensors

Transparent sensor Detects media gap between labels, notches on tags, and media out

Reflective sensor Detects reflective mark on back of media and media out

Label peeling sensor *1

Communication interfaces

Parallel IEEE1284 (Compatible, Nibble, ECP mode)

Serial 2400 4800 9600 19200 38400 57600 115200 bps

USB FULL Speed USB1.1

Indications, sensor and switch

LED POWER, PRINT, CONDITION, ERROR

Buzzer Alarms, errors, etc.

Operating panel keys PAUSE, FEED, STOP, MODE/REPEAT

Head-up detection

sensor

Detects head open.

Power switch Turns power on and off.

*4: The OCR font may have a low recognition rate according to the reader.

*5 It is equipped with UFSTTM and TrueTypeTM rasterizer that are licensed from Agfa

Corporation.

TrueTypeTM is a trademark of Apple Computer.

UFSTTM is a trademark of Agfa Corporation.

*6: Datamax®is a registered trademark of Datamax Bar Code Products Corporation.

1-1. General Specificationsons

CLP-621 & CLP-631 1-6

Power supplyPower supply

120V (-10%+6%), 2.5A, 60Hz (U.S.A., Canada)120V version

UL 1950, CSA No. 950, FCC Part 15 Subpart B (Class A)

220V-240V (-10%+6%), 1.5A, 50/60Hz (Europe)220V version

EN60950-1, EN55022 (Class A), EN55024, EN61000-3-2,

EN61000-3-3

Power consumption (max. value)

120V version 63W (operating at 12.5% printing duty), 11W (standby) (CLP-621)

71W (operating at 12.5% printing duty), 11W (standby) (CLP-631)

220V version 64W (operating at 12.5% printing duty), 11W (standby) (CLP-621)

70W (operating at 12.5% printing duty), 10W (standby) (CLP-631)

Others

Environment Operating temperature conditions:

Operating temp. 5 to 35°C, humidity 30 to 80%, condensation free

(Conditions: ventilation, and natural convection)

Storage temperature conditions

Temp. -20 to 60°C, humidity 5 to 85%

(Conditions: ventilation, and natural convection)

[Operating and printing assurance condition] [Storage assurance condition]

External dimensions Approx. 231 (W) X 289 (D) X 263 (H) mm

9.1 (W) X 11.4 (D) X 10.3 (H)"

Weight Approx. 4.9 kg (10.8 lb.)

Accessories Test label media, Test-use ribbon, CD-ROM (User's Manual), Quick

start guide, Head cleaner, Power cord, Media holder bar and Media

holder guide, Ribbon holder, Paper Tube

Option Auto-cutter unit, Peeler unit, Ethernet I/F board, Wireless LAN I/F

board

-20 60

Humidit

Operating assurance temperature

Printing assurance temperature

0535 40

Humidit

Temperature °C

Storage assurance

temperature

1-2. Printable Area

1-7 CLP-621 & CLP-631

The printable area of the printer is as follows:

When media is set to the printer, it must be aligned with the media guide at the left of the printing

mechanism. Though the available maximum media width is 118 mm (4.65"), there are unprintable

areas on both sides: 2.5 mm (0.10") width is on the left side and 11.5 mm (0.45") (for CLP-621)/

10.5 mm (0.41”) (for CLP-631) width on the right side.

The left side unprintable area applies for any size media.

Maximum media width: 118 mm (4.65")

H R

Reference end

Unprintable area

Printable area

Media guide

Direction of media feed

2.5 mm (0.10")

MODEL H R

104.0 mm 11.5 mm

CLP-621 (4.09”) (0.45”)

105.0 mm 10.5 mm

CLP-631 (4.13”) (0.41”)

Altri manuali per CLP-621

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Citizen Etichettatrice

Citizen

Citizen CL-S700 Manuale utente

Citizen

Citizen CL-S700 Manuale utente

Citizen

Citizen CLP-521 Manuale utente

Citizen

Citizen CMP-30 series Guida utente

Citizen

Citizen CBM-253 Manuale utente

Citizen

Citizen CL-E720DT Manuale utente

Citizen

Citizen CL-S700 Manuale del proprietario

Citizen

Citizen CLP-7002 Manuale utente

Citizen

Citizen CL-S521 Manuale utente

Citizen

Citizen CL-S300 Manuale utente

Citizen

Citizen CL-S700 Manuale utente

Citizen

Citizen CLP-8301 Manuale utente

Citizen

Citizen CL-S521 Manuale utente

Citizen

Citizen CLP-521 Manuale utente

Citizen

Citizen CLP-521 Manuale utente

Citizen

Citizen CL-S321 Series Manuale utente

Citizen

Citizen CL-S700 Manuale utente

Citizen

Citizen CL-S703 Manuale utente

Citizen

Citizen Peeler CL-S6621 Manuale utente

Citizen

Citizen Z-START CLP-521Z Manuale utente

Citizen

Citizen CL-S400DT Manuale utente

Citizen

Citizen CLP-9301 Manuale utente

Citizen

Citizen CLP-8301 Manuale utente

Citizen

Citizen Peeler CL-S6621 Manuale utente

Manuali Etichettatrice popolari di altre marche

Brother

Brother P-Touch 2420PC Manuale utente

newell

newell Dymo LabelManager 210D Manuale utente

Brother

Brother TD-4000 Manuale utente

U-Line

U-Line BROTHER H-8754 Manuale utente

Tharo Systems

Tharo Systems H-435+ Manuale utente

Brother

Brother E300 Manuale utente

Godex

Godex RT700 SERIES Manuale utente

ID Technology

ID Technology 252 Manuale utente

Labelmate

Labelmate MC-11 Manuale utente

CAB

CAB XD4M/300 Manuale utente

Avery Dennison

Avery Dennison Pathfinder 6057 Manuale di servizio

Brother

Brother P-touch PT-9700PC Manuale utente

TSC

TSC PEX1000 Series Manuale utente

Adkins

Adkins Label Master Manuale utente

Epson

Epson LabelWorks LW-400 Manuale utente

Primera

Primera 510212 Manuale utente

Brady

Brady BradyPrinter S3100 Manuale utente

DuraLabel

DuraLabel LabPRO Manuale utente