Citizen C15604D Manuale utente
User Manual
C15604D
LCDTV
1
To users:
Thank you for using our 15″LCD-TV. After unpacking, please check
that you have the following items: instruction manual, remote
control, AC adapter, AC cord.
Before connecting the items and turning the power on, please read
this book carefully. Please keep this book for later use. If a loss of
function caused by electrostatic shock occurs, please switch the
on/off button for restoring the function.
INDEX
1 Cautions………..………………………………………………………2
2 Features….……….……………………………………………………2
3 Illustration of the front panel……………………………………………3
4 Illustration of the interface panel………………………………………3
5 Illustration of the remote control……….……….………………………5
6 Basic operations…………………………………………………………6
7 Menu operations……………………….……………………………...7
8 Product specification…….…..………..………………………………11
9 Warranty………………………………………………………………….12
2
1- Cautions
Incorrect usage will cause a fire or electric shock. To prevent this, please handle it carefully when you
are installing, using and cleaning this machine. To ensure safety and extend the life-span of your
LCD-TV, please read the following items carefully:
●Please keep the book for later use;
●Please read and comply with all the warnings and instructions on the machine and this manual
thoroughly before operation;
●Do not use additional devices/accessories that are not recommended by manufacturer;
●Before operation, please make sure that the operating voltage of your unit is normal;
●Do not place the unit on unstable, dusty and humid places;
●Do not install near direct sunlight or any heat sources, such as radiators, heat registers, stoves or
other apparatus (including amplifiers) that produce heat;
●Allow enough space for proper ventilation;
●Please keep water away from the TV. If water comes in contact with the TV, disconnect the power
cord from the plug receptacle, then wipe the set with a dry soft cloth;
●Do not remove the back cover or repair LCD display by yourself. Once the shell is opened, you are
exposed to high voltage and face risks that can cause serious injury;
●Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
2- Features
●Can be connected with analog PC input
●Can be connected with AV and S-VIDEO input
●Can receive TV signal
●Bundled with 2×2W B-class power speakers, two group of audio input
●Full function of infrared remote control
- 3 -
3- Illustration of the front panel
Indicator light
Remote sensor
4- Illustration of the interface panel
(1) Illustration of Control board
1- Sketch map：
2- List of controls and description：
1- Select the input signals (INPUT)
2- Exit (ESC)
3- MENU/ENTER (MENU)
4- Volume down/left orientation (- VOL)
5- Volume up/right orientation (VOL+)
6- TV channel down/down orientation (- CH)
7- TV channel up/up orientation (CH+)
8- Power On/Off (POWER)
- 4 -
3- About the indicator light
AV, S-VIDEO, PC-RGB mode: When there is a signal input, the light will be green (see
section 3). If there is no signal, the light will be orange. The light will be red when the
TV is in standby condition (Stand-by).
(2) Illustration of the jacks on the back on the unit
1- Sketch map:
2- List of jacks and description:
JACK DESCRIPTION
1 DC 12V IN Power input interface
2 VGA DB15 VGA interface.
3 S-Video S-Video input jack.
4 AV Composite video input jacks.
5 PC Audio PC audio input jack.
6 Earphone Out Earphone out interface.
7 RF(75Ω) TV antenna interface.
1 2 3 4 5 6 7
- 5 -
5- Illustration of the remote control
1- Sketch map of the remote control
2- List of the keys on the remote control and their function
1. POWER Power supply switch
2. MUTE MUTE
3. DISP Display / cancel current TV channel or cancel
4. AUTO Auto Adjust (PC MODE)
5. INPUT TV / PC-RGB / AV / S-VIDEO mode Select
6. 0~9 TV channel number select
7. -/-- One bit or two bit TV channel select
8. RETURN Quick TV channel switch
9. MENU MENU / ENTER
10. EXIT ESC
11. ◄VOL- Volume down / Left orientation
12. ►VOL+ Volume up / Right orientation
13. ▼CH- TV channel down / Down orientation
14. ▲CH+ TV channel up / Up orientation
- 6 -
6- Basic operations
Turn on the LCD-TV
When the power is on, the indictor light will be orange or green (TV
mode). Once the signal is received, the light will turn green. Please
note: it will remain orange if there is no signal. When the set is on,
the input signal will be displayed on the screen. The indicator Light
will turn red in standby mode.
Note:
The display of the input mode will disappear in 3 seconds.
Switch among TV / PC-RGB / AV / S-VIDEO
Press INPUT and choose the input mode you want.
When you press INPUT each time, TV, PC-RGB, AV,
S-VIDEO will appear on the screen in a cycle.
Note:
The display of the input mode will disappear in 3 seconds.
Audio control
1. Press VOL+ to increase the volume, and there is a bar with numbers
on the screen indicating the loudness.
2. Press VOL- to lower the volume and also there is a bar with numbers
on the screen indicating the loudness.
Mute
1. Press MUTE to turn off the sound temporarily and a sign will appear on the screen.
2. Press MUTE again, the mute status will be cancelled and the sign will disappear.
Note：
When you press POWER, the mute status will be cancelled automatically.
Enter a standby status
Press POWER, the unit will enter a standby status and the indicator light will turn red at the same time.
Press POWER again, the unit will exit the standby status and the indicator light will turn orange (no
signal input) or green (signal input).
Select the TV channel you want
-
8
--
4
-
TV
PC RGB
-
AV
SVideo
-
AV
PC RGB
-
TV
SVideo
-
×
50
10
VOLUME
VOLUME
- 7 -
You can use Channel Select on the remote control to select TV
channels directly.
The unit can store 125 channels (CATV 1 - 125 / AIR 2 - 69), and you
can press the keys on the remote control or on the panel to make a
selection.
1- Press the relevant key on the remote control if you want to choose any channel from 1 to 9.（for
example: if you want to choose channel 8, just press the key number 8.）
2- If you want to choose a channel higher than 9, please press -/-- first, and then press the number
you want.(for example: select channel 45)
a. Press -/-- ;
b. Press key number 4 ;
c. Press key number 5.
Note:
·Use the second way to select a channel, you can finish all steps in 4 seconds.
·Use -/-- to switch between stations 1~9 and 10~125.
7- Menu operations
1. Press MENU to display the menu options.
2. Press ▲/ ▼on the remote to select sub-menu, and press MENU to enter, and press▲▼◄► to
change the parameters.
3. Press EXIT on the remote to return to main menu.
NOTE: In this manual, the OSD (On screen display) may be different from your TV’s display
Use （CH-）/（CH+）on the remote control or the TV set to select the channel you want.
Press （CH+), and the channel will be changed as follows:
2→3→…→124→125→1→2→3…
Press （CH-）, and the channel will be changed as follows:
3→2→1→125→124→…→4→3
- 8 -
Input mode: AV / S-VIDEO
Name of
submenu Picture of submenu Instructions
MAIN
MENU
IMAGE SETTING
VIDEO ADVANCE
OSD SETTING
SOUND SETTING
RESET
INPUT SOURCE
TV SETTING
1. IMAGE SETTING
2. VIDEO ADVANCE
3. OSD SETTING
4. SOUND SETTING
5. RESET
6. INPUT SOURCE
zPress key ▲/ ▼on the
remote to select sub-menu,
and press MENU to enter.
IMAGE
SETTING
BRIGHTNESS
50
CONTRAST
50
COLOR
50
TINT
0
SHARPNESS
2
1. BRIGHTNESS
2. CONTRAST
3. COLOR
4. TINT
5. SHARPNESS
VIDEO
ADVANCE
BLUE SCREEN ON
1. BLUE SCREEN
OSD
SETTING
LANGUAGE ENGLISH
OSD H
50
OSD V
50
.
.
1. LANGUAGE: Change the
language of the menu.
2. OSD.H
3. OSD.V
SOUND
SETTING
TREBLE 0
BASS 0
BALANCE 0
MUTE OFF
VOLUME 50
1. TREBLE
2. BASS
3. BALANCE
4. MUTE
5. VOLUME
- 9 -
Name of
submenu Picture of submenu Instructions
INPUT
SOURCE
PC RGB
AV
SVIDEO
TV
-
-
1. PC-RGB
2. AV
3. S-VIDEO
4. TV
zPress ▲/ ▼button to select
one of it, then press MENU to
confirm your selection. The
input source will change to
your selection.
Input mode: TV
Name of
submenu Picture of submenu Instructions
MAIN
MENU
IMAGE SETTING
TV SETTING
V
IDEO ADVANCE
OSD SETTING
SOUND SETTING
RESET
INPUT SOURCE
1. IMAGE SETTING
2. TV SETTING
3. VIDEO ADVANCE
4. OSD SETTING
5. SOUND SETTING
6. RESET
7. INPUT SOURCE
zPress key ▲/ ▼on the
remote to select sub-menu,
and press MENU to enter.
TV
SETTING
CHANNEL 0
SOUND DK
SKIP THIS NO
AUTO FINE YES
FINE TUNE
56 MHz
MANUAL SEARCH
AUTO SEARCH
1. CHANNEL
2. SOUND
3. SKIP THIS
4. AUTO FINE
5. FINE TUNE
6. MANUAL SEARCH
7. AUTO SEARCH: Press
MENU to enter auto search
as follow:
AUTO SEARCH
NO YES
AUTO SEARCH
PLEASE WAIT
2
NOTE: The other TV menus are the same as AV’s.
Indice
Altri manuali Citizen TV LCD
Citizen
Citizen C37604HD Manuale utente
Citizen
Citizen C32604HD Manuale utente
Citizen
Citizen LT1560 Manuale utente
Citizen
Citizen C26604HD Manuale utente
Citizen
Citizen 19CL708 Manuale utente
Citizen
Citizen 32CL710 Manuale utente
Citizen
Citizen C27604HD Manuale utente
Citizen
Citizen JCTV2110 Manuale utente
Citizen
Citizen 19CL708 Manuale utente
Citizen
Citizen LT1960 Manuale utente
