Citizen C300MSC Manuale utente
USER MANUAL
C300MSC
AM/FM CD Micro System
with MP3/Auxiliary Input
13ED20
Table of Contents
SAFETY INSTRUCTIONS 1
PREPARATION FOR USE 4
AC OPERATION 4
SPEAKER CONNETION 4
REMOTE CONTROL BATTERY INSTALLATION 4
CONNECTING AN EXTERNAL UNIT 5
LOCATION OF CONTROLS 6
OPERATION 8
SETTING THE CLOCK 8
HEADPHONE JACK 8
LISTENING TO THE RADIO 9
SETTING RADIO PRESETS 10
RECALLING RADIO PRESETS 11
PLAYING COMPACT DISCS 12
CD PAUSE CONTROL 13
TO BEGIN PLAYBACK FROM A SPECIFIC TRACK 13
FORWARD/REVERSE SKIP TRACK AND HIGH-SPEED MUSIC SEARCH 14
REPEAT PLAYBACK 14
RANDOM PLYBACK 15
TO PROGRAM THE MEMORY 16
PROGRAMMED REPEAT 17
AUX IN 17
CARE AND MAINTENANCE 18
TROUBLESHOOTING GUIDE 19
SPECIFICATIONS 20
WARRANTY 21
1
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DANGEROUS VOLTAGE:
The lightning flash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
ATTENTION:
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
DANGER:
Invisible and hazardous laser
radiation when open and
interlock failed or defeated. Avoid
direct exposure to beam.
FCC WARNING:
This equipment may generate or use
radio frequency energy. Changes or
modifications to this equipment may
cause harmful interference unless the
modifications are expressly approved in
the instruction manual. Modifications not
authorized by the manufacturer may
void users authority to operate this
device.
SURGE PROTECTORS:
It is recommended to use a surge
protector for AC connection. Lightning
and power surges ARE NOT covered
under warranty for this product.
LASER SAFETY: This unit
employs a laser. Only qualified
service personnel should attempt
to service this device due to
possible eye injury.
CAUTION: USE OF
CONTROLS, ADJUSTMENTS
OR PERFORMANCE
PROCEDURE HEREIN MAY
RESULT IN HAZARDOUS
RADIATION EXPOSURE.
INFORMATION:
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does
cause harmful interference to radio or
television reception, which can be
determined by turning the equipment off
and on, the user is encouraged to try to
correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving
antenna.
•Increase the separation between the
equipment and receiver.
•Connect the equipment into an outlet
onacircuit different from that to which
the receiver is connected.
•Consult the dealer or an experienced
radio/TV technician for help.
Before using the unit, be sure to read all
operating instructions carefully. Please note that
these are general precautions and may not
pertain to your unit. For example, this unit may
not have the capability to be connected to an
outdoor antenna.
1. READ INSTRUCTIONS
All the safety and operating instructions should
be read before the product is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be
retained for future reference.
3. HEED WARNINGS
All warnings on the product and in the operating
instructions should be adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be
followed.
5. CLEANING
Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a dry cloth for cleaning.
6. ATTACHMENTS
Do not use attachments not recommended by
the product's manufacturer as they may cause
hazards.
7. WATER AND MOISTURE
Do not use this product near water–for example:
near a bathtub, washbowl, kitchen sink or
laundry tub; in a wet basement; or near a
swimming pool.
8. ACCESSORIES
Do not place this product on an unstable cart,
stand, tripod, bracket or table.
The product may fall, causing
serious injury and serious
damage to the product. Use
only with a cart, stand, tripod,
bracket or table recommended
by the manufacturer or sold with
the product. Any mounting of the product should
follow the manufacturer’s instructions, and
should use a mounting accessory recommended
by the manufacturer.
8A. An appliance and cart combination should be
moved with care. Quick stops, excessive force
and uneven surfaces may cause the appliance
and cart combination to overturn.
9. VENTILATION
Slots and openings in the cabinet and in the
back or bottom are provided for ventilation, to
ensure reliable operation of the product and to
protect it from overheating. These openings
must not be blocked or covered. The openings
should never be blocked by placing the product
on a bed, sofa, rug or other similar surface. This
product should never be placed near or over a
radiator or heat source. This product should not
be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is
provided or the manufacturer's instructions have
been adhered to.
10. POWER SOURCES
This product should be operated only from the
type of power source indicated on the marking
label. If you are not sure of the type of power
supply to your home, consult your appliance
dealer or local power company. For products
intended to operate from battery power, or other
sources, refer to the operating instructions.
11. GROUNDING OR POLARIZATION
This product is equipped with a polarized
alternating-current line plug (a plug having one
blade wider than the other). This plug will fit into
the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully
into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
12. POWER CORD PROTECTION
Power-supply cords should be routed so that
they are not likely to be walked on or pinched by
items placed upon or against them, paying
particular attention to cords at plugs,
convenience receptacles, and the point where
they exit from the appliance.
13. LIGHTNING
To protect your product from a lightning storm,
or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet
and disconnect the antenna or cable system.
This will prevent damage to the product due to
lightning and power-line surges.
14. POWER LINES
An outside antenna system should not be
located in the vicinity of overhead power lines or
other electric light or power circuits, or where it
can fall into such power lines or circuits. When
installing an outside antenna system, extreme
care should be taken to keep from touching
such power lines or circuits as contact with them
might be fatal.
15. OVERLOADING
Do not overload wall outlets and extension cords
as this can result in a risk of fire or electric
shock.
16. OBJECT AND LIQUID ENTRY
Never push objects of any kind into this product
through openings as they may touch dangerous
2
SAFETY INSTRUCTIONS
PORTABLE CART WARNING
(symbol provided by RETAC)
voltage points or short out parts that could result in
fire or electric shock. Never spill or spray any type
of liquid on the product.
17. OUTDOOR ANTENNA GROUNDING
If an outside antenna is connected to the
product, be sure the antenna system is
grounded so as to provide some protection
against voltage surges and built-up static
charges. Section 810 of the National Electric
Code, ANSI/NFPA 70, provides information with
respect to proper grounding of the mast and
supporting structure, grounding of the lead-in
wire to an antenna discharge product, size of
grounding conductors, location of antenna
discharge product, connection to grounding
electrodes and requirements for grounding
electrodes.
18. SERVICING
Do not attempt to service this product yourself
as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
19. REPLACEMENT PARTS
When replacement parts are required, be sure
the service technician uses replacement parts
specified by the manufacturer or those that have
the same characteristics as the original part.
Unauthorized substitutions may result in fire,
electric shock or other hazards.
20. SAFETY CHECK
Upon completion of any service or repairs to this
product, ask the service technician to perform
safety checks to determine that the product is in
proper operating condition.
21. WALL OR CEILING MOUNTING
The product should be mounted to a wall or
ceiling only as recommended by the
manufacturer.
22. DAMAGE REQUIRING SERVICE
Unplug the product from the wall outlet and refer
servicing to qualified service personnel under
the following conditions:
a. When the power-supply cord or plug is
damaged.
b. If liquid has been spilled or objects have
fallen into the product.
c. If the product has been exposed to rain or
water.
d. If the product does not operate normally by
following the operating instructions. Adjust
only those controls that are covered by the
operating instructions, as an adjustment of
other controls may result in damage and will
often require extensive work by a qualified
technician to restore the product to its
normal operation.
e. If the product has been dropped or the
cabinet has been damaged.
f. When the product exhibits a distinct change
in performance–this indicates a need for
service.
23. HEAT
The product should be situated away from heat
sources such as radiators, heat registers, stoves
or other products (including amplifiers) that
produce heat.
24. NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV
system installer's attention to Article 820-40 of
the NEC that provides guidelines for proper
grounding and, in particular, specifies that the
cable ground shall be connected to the
grounding system of the building, as close to the
point of cable entry as practical.
3
SAFETY INSTRUCTIONS (CONTINUED)
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC - NATIONAL ELECTRICAL CODE
ELECTRIC
SERVICE
EQUIPMENT
GROUND
CLAMP
S2898A
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
AC OPERATION
Unwind he AC power cord and extend it to its full length. Insert
the AC power cord into any convenient 120V 60Hz household
outlet.
Please note that this unit is equipped with a polarized AC plug
which has one blade wider than the other. This is a safety feature to reduce the likelihood of electric
shock. This polarized AC plug will only fit in a polarized AC outlet. If you find that you cannot insert this
plug into your outlet, you may have an obsolete non-polarized outlet. Please do not try to defeat this
safety feature by using a non-polarized adapter or by filing the wider blade to make it fit into your outlet. If
this plug does not fit into your outlet, you should contact a qualified licensed electrician to replace your
obsolete outlet.
SPEAKER CONNECTION
1. Place the speakers in convenient locations on either side of the unit. Usually a distance of five to
eight feet between speakers provides the best stereo effect, but this may vary depending on the size
and acoustics of the room.
2. Locate the Speaker Terminals on the rear of the unit and connect the left speaker to the Left jack and
the right speaker to the Right jack.
CAUTION: Only connect the speakers which are supplied with the unit. The use of any other or
additional speakers may cause damage to the unit. Never operate the unit without the speakers
connected.
REMOTE CONTROL BATTERY INSTALLATION
The battery compartment is located on the rear of the remot control.
1. Remove the battery compartment door by pressing in on the tab and lifting it off.
2. Insert two (2) AAA size batteries into the battery compartment as shown to the
right. Be sure to observe the polarity marking which are engraved inside the
battery compartment. If the batteries are inserted incorrectly, the remote control
will not operate.
3. Replace the battery compartment door.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery
compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g.Alkaline and Carbon-zinc) or old
batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent
damage or injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and
rupture.
(Follow battery manufacturer’s directions.)
PREPARATION FOR USE
4
CONNECTING AN EXTERNAL UNIT
NOTES:
． Connecting the unit to an external audio source will allow you to broadcast the external
unit’s sound through this unit’s speakers.
． When connecting the external unit, refer to the owner’s manual of the external unit, as
well as this manual.
． When connecting the external unit, make sure the power is off and both units are
unplugged before making any connections.
To hear the unit connected to the Aux In jacks, turn both units on, then
press the FUNCTION button until the AUX indicator appears in the
display.
5
PREPARATION FOR USE (CONTINUED)
EXTERNAL AUDIO/MP3 SOURCE
Out
1. Display
2. STANDBY Indicator
3. FUNCTION Button
4. POWER/STANDBY Button
5. BAND Button
6. Skip/Search/Tuning nButton
7. Skip/Search/Tuning oButton
8. PLAY/PAUSE ®p Button
9. Headphone Jack
10. CD Compartment
11. CD Door Open/Close Area
12. Remote Sensor
13. VOLUME Control
14. P-MODE Button
15. PROG/CLK Button
16. STOP (■) Button
6
LOCATION OF CONTROLS
2
1
12
4
3
5
7
6
8
9
11
10
13
15
14
16
FRONT
1
2
3
4
5
6
7
8
9
10
LOCATION OF CONTROLS (CONTINUED)
REAR
7
1. AUX Jacks
2. FM Antenna Wire
3. AC Cord
4. Speaker Jacks
REMOTE 1. FUNCTION Button
2. Skip/Search/TuningButton
3. STOP/BAND Button
4. MEMORY DOWN Button
5. POWER ON/OFF Button
6. PROGRAM/CLK SET Button
7. MODE Button
8. PLAY/PAUSE Button
9. Skip/Search/Tuning Button
10. MEMORY UP Button
NOTE: All of the buttons on the remote control can be
used in the same manner as their respective buttons
on the main unit.
8
OPERATION
With the power off, press the PROG/CLK
button; “12H” or “24H” will blink.
1
Press the Skip/Search/Tuning o 1 or n
2button to set the unit to the 24 hour
(24H) mode (also known as military
time), or 12 hour (12H) mode.
2
1
2
Press the PROG/CLK button and the
hours will blink.
3
Press the Skip/Search/Tuning o 1 or n
2button to set the current minute. Press
the PROG/CLK button ❸and the time
will be set.
3
2
1
5
Press the Skip/Search/Tuning o 1 or n
2button to set the current hour,then
press the PROG/CLK button ❸again; the
minute digits will blink. If you selected 12H
time, be sure to observe the AM or PM
indicators to make sure you have set the
hour correctly.
3
2
1
4
SETTING THE CLOCK
For private listening, plug 3.5mm
headphones (not included) into this jack.
The speakers will be disconnected when
using this jack.
1
HEADPHONE JACK
Indice
Lingue:
Altri manuali Citizen Impianto stereo
