Clabel CT521B Manuale utente
QUICK
INSTALLATION
GUIDE
Unpacking Checklist
1
USB Cable Installation Guide
Installation
Printer
Appearance Component
2
1
Top cover
2
Exit
3
Open or close the cover
4
Power switch
5
LED indicator
6
USB connector
OPEN
CLOSE
⦿ Press the top cover and rotate it to the left
to open and to the right to close.
⦿ Flick the switch and hold for two
seconds to switch on the printer.
⦿ Flick the switch 1 time to advance
a printing paper.
⦿ Flick the switch 2 times to print a
self-test page.
⦿ Blue indicator blinking: Bluetooth disconnected.
⦿ Blue indicator on constantly: Bluetooth connected.
⦿ Blue indicator flashing: Low battery. Please charge the battery.
⦿ Red indicator on constantly: Charging.
⦿ Green indicator on constantly: Fully charged.
1、 Open the top cover by pressing
it with your palm and gently
rotating it to the left.
2、 Load the paper with coated up
into the compartment.
3、 Place the top cover into
its home position.
4、 Close the top cover by pressing it
with your palm and gently rotate
it to the right.
Label Paper Loading
3
⦿ Make sure the label is not stuck in the compartment when inserted or removed.
⦿ Make sure the top cover is well assembled before use.
4
Operating Manual
For Mobile Phone
2、Flick the switch and hold for 2 seconds
to switch on the printer. Check if the LED
indicator is on.
1、Download label editing app "Clabel mini"
from Google Play Store or Apple APP Store
and install it.
4、Open “Clabel mini” and tap on the[icon]
in the upper right corner.
3、Click “Settings” on the phone and
set “Bluetooth” to ON.
5、Select the valid Bluetooth to get
connected.
Connect the device
TTLZ-CT521B-0E67
CT521B-
6、Tap “New”.
7、Add the desired content,
then tap “Print”.
Double-click Edit
T
Print
Please enter text
8、Type in the number of copies to
print, click “OK”. The printer will
start automatically.
Production
complete
Number of copies printed
1
Notes
5
Usage precautions
(1) Install the printer on a stable surface. Do not place the printer in
areas exposed to vibration or impact.
(2) Do not use or store the printer in areas exposed to high tempera
tures, high humidity, or excessive dust.
(3) No water or conductive substance (i.e., metal) is allowed into the
printer. In case of such conditions, turn off the power immediately.
(4) Do not allow the printer to start printing when there is no recording
paper installed, otherwise the printhead and rubber roller will be
damaged.
(5) Users shall not disassemble the printer for maintenance or
modification.
(6) Use only the power adapter certified in accordance with national
standards.
(7) To ensure print quality and normal lifetime, use recommended or
good quality paper.
(8) This product is intended to be used at altitudes not exceeding 5,000
m in tropical climates.
Printer cleaning
Note
The printhead should be cleaned promptly if:
(1) The print is not clear;
(2) The vertical column of print is not clear;
(3) A Grinding noise is heard while feeding the paper;
Cleaning Steps:
(1) Switch the printer power off, open the cover and remove any paper;
(2) Allow the printhead to cool if it had just finished printing;
(3) Using a soft cotton cloth dipped in absolute ethyl alcohol, gently wipe
the dust and particles off the thermal printhead surface；
(4) Only use the printer for printing until the cleaning alcohol evaporates
completely and the cover is closed；
(1) Make sure to turn off the printer before any maintenance.
(2) Do not touch the printhead surface with the fingers or metallic objects.
Do not touch the printhead, rubber roller, and sensor surface with tweezers
or other tools. Abrasion could damage the printhead.
(3) Do not use gasoline, acetone, or any other organic solvents for cleaning.
(4) Only use the printer for printing until the cleaning alcohol evaporates
completely.
Shenzhen Dudian Technology Co., Ltd.
Made in China
Clabel is always committed to providing better products and
services to our customers. If you have any dissatisfaction or issues
with our label printer for labeling, please contact us, our
professional customer service will solve all your problems
promptly until you are satisfied!
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority tooperate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference in a residential installation.This
equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of thefollowing measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different. from that to which
the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.NOTE: This
device and its antenna(s) must not be co-located oroperation in conjunction
with any other antenna or transmitter
RF Exposure Statement
To maintain compliance with FCC's RF Exposure guidelines, This equipment
should be installed and operated with minimum distance of 20cm the radiator
your body. This device and its antenna(s)
must not be co-located or operation in conjunction with any other antenna or
transmitter
Indice
Lingue:
Altri manuali Clabel Etichettatrice
