Page 6
To change a watering programme currently in use, enter the new LINE and FREQUENCY settings as required.
The change will be eective by the timer when appropriate.
Examples: - with watering in progress and line 2 active, the position of the LINE selectors is changed (e.g., from 10 min to 20 min): there will be no
change on the duration of the watering step already in progress on line 2, whereas the new setting of 20 minutes will be eective with the activa-
tion of line 3.
- changing the position of the FREQUENCY selector (say, from 8 to 12 hours): the new setting will take eect within 24 hours subsequent to the
change being made; thereafter, the watering cycles will be repeated at the new frequency selected, whilst the START time remains unchanged.
For Multipla AC 230/24V LCD (p/n): 8058
Multipla AC LCD
Multipla AC LCD
Example of programming: at 16:30, the duration is selected for all of the watering lines (LINE selectors) and the
frequency is set at 8h (FREQUENCY selector). Suppose that watering is not required immediately, but at 22:30
(i.e. after 6 hours): press the START+… button once, and then six times in succession, so that the display shows
6:00. The time indicated in the display begins counting down, reaching 0:00 at 22:30; the watering cycle starts,
and will then be repeated every 8 hours as set with the FREQUENCY selector (i.e. at 22.30, at 06:30 and at 14:30).
For Multipla AC 230/24V LCD (p/n): 8058
User manual
User manual
1
12
23
3
LINE
MIN
from 10 min to 20 min
LINE
MIN
LINE
MIN
