Clapiel RO BASIC Manuale utente

User’s Manual

RO BASIC

RO ADVANCED

Clapiel SLIM

This manual is intended to be used only for MFP

1320A/MFP

1440A

Please make sure to read this manual before use.

Design and color may differ from the picture.

Product appearance, speciﬁcation, etc. are subject to change without

prior notice if necessary for improving product performance.

The rated voltage of this product is 100

240V~. 50/60Hz. (MFP

1440A)

Rev,No.00

Content

Characteristic

Countertop water puriﬁer with compact design

Compact size makes it easy install anywhere necessary thus utilizing given space effectively.

Water spout

Detachable water spout for periodical cleaning.

Easy ﬁlter replacement

Quick and easy ﬁlter replacement.

LED indicator

The LED color on the dial allows you to check the operational status of UV ﬁlters.

Green : UV off

Blue : UV on

Red : UV ﬁlter replacement period

* UV ﬁlter only applied advanced types.

1. Characteristic

2. Safety Precaution

3. Installation Precaution

4. Installation Method

5. How to Use

6. Usage Precaution

7. Cleaning Method

8. How to Manage Product's Hygiene

9. Filter Function & Filter Service Life

10. Filter Replacement

1. Pre-complex ﬁlter / RO Membrane ﬁlter / Post Carbon Block ﬁlter

5.0

2. UV sterilizer

11. Standard & Flow Diagram

1. Standard

2. Flow diagram

12. Troubleshooting

3~4

12~13

2. Safety Precaution

Do not touch the power

plug with wet hands.

An electric shock may occur.

Unstable connection may

cause a fire.

When the power cord has

been damaged, exchange

the power cord in order to

prevent danger such as an

electric shock, etc.

Do not use damaged or loose

wall outlets. An electric shock

or fire may occur.

An electric shock or fire

may occur.

Insert the power plug

in a stable position

properly in order to

avoid swinging.

Use the single power supply.

Damage to the power cord

can cause an electric shock.

To disconnect the unit,

be sure to pull by the

plug and not the cord.

Damage to the power cord

can cause an electric shock.

To disconnect the unit, be

sure to pull by the plug

and not the cord.

Do not put a bowl containing water,

chemicals, small metals, etc. on the unit.

If these materials drop into the inside of the

unit,this may cause an electric shock or fire.

Do not put candles, lit cigarettes, etc. on the

unit and do not install the unit near a

heating appliance. Move after

removing all water and plug

when it replaces.

There is a danger of a fire.

An electric shock or fire

may occur.

An electric shock or fire

may occur.

Do not bend the power

cord excessively or put

heavy objects over the

power code.

An electric shock or fire

may occur.

If the unit is damaged or

malfunctioned, do not

disassemble, repair, or

remodel it on your own.

※ Cautions are divided into 2 categories : 'Danger' and 'Caution'

Associated with the possibility for serious injury or death.

Caution

Information on the plug for electricity power is not applicable for MFP

1320A model since it has no UV sterilizer.

2. Safety Precaution

Be aware that the total current of multiple

outlet is 110

240v~, 50/60Hz.

Do not install the unit in a

place where the tempera

ture may drop below

32°F (0 °C).

There is a danger of an

electric shock or fire.

Do not install the unit in a

sloped or unstable position.

This can cause a performance

degradation, system damage

or overall trouble

There is a danger of an

electric shock or fire.

If there is dust, water or etc on the

power plug pin, wipe it off well.

Associated with the possibility of injury, property damage

and performance degradation.

Caution

※

This content includes precautions in preventing any unexpected events. Please read through this carefully.

Information on the plug for electricity power is not applicable for MFP

1320A model since it has no UV sterilizer.

3. Installation cautions

Use the unit at the following conditions

Water pressure :

1.4~7kgf/㎠

(137.3~686kPa)

Water temperature : 39

100℉(4~38℃)

pH : 5.8~8.5 Water hardness : 300 ppm or less

TDS : 0.5 NTU or less Water quality : Biologically safe

※If tubes are bent or pressed, water does not ﬂow well and could cause problems.

Do not install the unit at the following places.

Near ﬁre Near ﬂammable materialNear air conditioner or heater Wet places

To a place being exposed to rain or snow To a place being exposed to direct sunlight

Near chemicals(volatile material, organic solvent, etc.)

To a place below 32℉(0℃) or a place with the possibility of dropping below 32℉(0℃).

Do not connect to hot water over (38℃) to this unit.

※It could cause problems.

When connecting tubes, ensure that the tubes are not bent or pressed down by heavy

objects, etc.

※If tubes are bent or pressed, water does not ﬂow well and could cause problems.

When installing more than one unit(water puriﬁer, dishwasher, etc.), source water tube

and brine water tube need to be independent for one another.

0504

4. Installation

Open the water supply valve and inlet adapter valve which supplies water into the system.

Connect the adapter into the system and plug into the power supply. Electricity for this

system 100

240V~, 50/60 Hz.

Check whether there is no leakage on the connecting areas and also the water is being

supplied.

Check out the leakage.

The product is installed vertically. (Use level to make sure its level degree.)

Turn off the water at the cold-water shutoff valve underneath the sink where you connect

this ﬁltration system. Disconnect the water line from the shutoff valve by loosening the

nut and removing the tubing from the valve ﬁtting. Use a basin wrench to loosen the nut

holding the tubing on the faucet stem. Connect the inlet water adapter valve.

※Be careful, there may be leakage if the sealing rubber (O-ring) is dropped or screw is damaged.

※ It is recommended to install it on the counter top 80cm higher from ﬂoor.

Attach hoses to the ﬁltration system connect the hose from the valve to the inlet on the

backside of the system, and connect the hose from the faucet to the ﬁlter outlet.

※

Information on the plug for electricity power is not applicable for MFP

1320A model since it has no UV sterilizer.

5. Usage

Reverse Osmosis

membrane ﬁlter

Pre

complex

ﬁlter

Post carbon

block ﬁlter (5㎛)

Dial of water intake

Water spout

Dial of water intake : Dial clockwise to take water.

(Dialing rotation range : 0~90 degree)

Green : Working

Blue : Water intake & UV on

Red : UV inability (alarm time of replacement)

UV sterilizer

(MFP

1440A)

0706

6. Cautions during use

This product is 110

240v~.50/60Hz Product.

Do not use multiple electrical appliances simultaneously in a power outlet.

(Abnormal heat of outlet may cause ﬁre.)

Never move the product while in operation.

Do not place product in subzero temperatures.

Avoid the use of chemicals around the product (volatile material, organic solvent, etc.)

and do not place chemicals near the product.

In case of no water ﬂow, check if source water can be shut off or if the machine is

malfunctioning.

(In case of water cut

off, unplugging is recommended.)

Plug out the power prior to cleaning inside and do not apply the water to the product

directly.

(An electric shock and ﬁre may occur.)

In case the product is not used for long of period time, shut off the adapter (source

water valve) and pull out the power plug. Do not touch the power plug with wet hands

(Fire or electric shock can occur.)

Since the ﬁlter of the water puriﬁer is a consumable item, please keep the ﬁlter

replacement period so that you always receive clean water.

If there is a strange sound, smell or smoke in the product during use, unplug the power

plug immediately, lock the water adapter valve, and contact us

※

Information on the plug for electricity power is not applicable for MFP

1320A model since it has no UV sterilizer.

7. Cleaning method

Wipe it with soft dry cloth

●

Product appearance

Remove the water inlet by turning it clockwise and then

wash it with running water

※Do not use detergent, thinner, benzene, or wax when cleaning.

※This may cause discoloration or peeling of the product,

damage to the product, and health problems.

●

Water intake

Remove the water tray from the product and wash it

with ﬂowing water.

※If there is heavy contamination of the water, please wash

with 1~2 drops of neutral detergent. After rinsing with a

mild detergent, rinse thoroughly with tap water until

bubbles are removed.

※When cleaning, be careful not to drop the water tray or

subject it to external impact. Failure to do so may cause

leakage.

※Do not use hot water or alcohol for cleaning. It may cause

deformation and breakage.

Water spout

0908

8. How to manage a product's hygiene

Division Contents

Area

Environment

Installation

Water intake

(Cork)

Water spout

Using a water

puriﬁer

Be careful not to spill foreign material on the water inlet, and if it splashes,

wipe it off immediately.

Clean it regularly with non-woven fabric, cotton swabs, etc. once a week.

Do not put your hands or mouth on the water inlet, and keep the cup you

are using out of the water intake.

Outdoor or direct sunlight

Can be installed in our recommended water quality range

(Water pressure: 1.4~7kgf/㎠)

Place close to toilet

Near air conditioner or heater

Self

management

Water puriﬁer

check

If the water intake (caulk), water trap etc. are dirty, your own self-

management is required.

If there is water, immediately discard, please wash at least once a week

Period of use Long term

unused

When it is not used for a long time. Please use after ﬂowing water for 5 minutes.

Step1 : Pre

complex ﬁlter

Filter out rust & particulate contaminants

Remove residual chlorine & organic chemicals

Protect RO membrane by removing particulate contaminants that passes

through the pre-ﬁlter

9. Filter function & Filter service life

1. Filter function

2. Filter service life

Step 4 : UV sterilizer

E.Coli and various kinds of bacteria

※

Information on the plug for electricity power is not applicable for MFP

1320A model since it has no UV sterilizer.

Step 2 : RO membrane ﬁlter

Soluble foreign substances with molecular weight of over 200 such as heavy

metals, bacteria, organic chemicals, etc. are treated by the separation method

through super precision semipermeable membrane and exert the water

puriﬁcation effect.

Step 3 : Post Carbon Block ﬁlter (5

㎛

)

Remove dissolved gas and odor

Provide fresh water taste

※We recommend that you replace the ﬁlter immediately

because the UV sterilizer ﬁlter is inoperable when the dial

is illuminated red.

※Filter service life is varied depending on environment

such as location, water conditions (quality, temperature),

amount of water used and seasons (summer, winter).

※You can take clean water by replacing ﬁlters according to

the recommended ﬁlter service life.

Filter Service life

Pre

complex ﬁlter

6 months

RO membrane ﬁlter

24 months

6 months

Post Carbon Block ﬁlter (5

㎛

)

UV sterilizer

16 months

1110

10. Filter Replacement

③For ﬁlter replacement, use the screw driver

to loosen two ﬁxed screws and then open

the side cover.

④Uphold the ﬁlter and turn left, then pull it out.

⑤Get the replacement ﬁlter and insert into the head and turn right

to ﬁx it.

※Check the leakage occurrence after water supplied. If leakage occurs plug out and turn off the system

from water supply valve.

①Close the inlet water supply valve.

②Dial of water intake to unlock the pressure

of the inside of ﬁlter.

⑥Open the inlet water supply valve.

⑦Flush 1 minute.

※ Information on the plug for electricity power is not applicable for MFP

1320A model since it has no UV sterilizer.

Pre-complex ﬁlter / RO Membrane ﬁlter / Carbon Block ﬁlter (5㎛)

※Check the leakage occurrence after water supplied. If leakage occurs plug out and turn off the system

from water supply valve.

10. Filter Replacement

③For ﬁlter replacement, use the screw driver

to loosen two ﬁxed screws and then open

the side cover.

④Open the cover of UV ﬁlter.

⑤Replace the ﬁlter after taking out the old

one by using the ﬁtting tools which is

connected to the replacement UV ﬁlter.

⑥Close the cover of UV ﬁlter and also side

cover of the system.

⑦After opening inlet water, supply valve plug

into the power supply.

①Close the inlet water supply valve.

②

After dialing of water intake to unlock the pressure of the inside of ﬁlter, plug out from the

power socket.

⑧Flush 1 minute before usage.

※ Information on the plug for electricity power is not applicable for MFP

1320A model since it has no UV sterilizer.

2. UV sterilizer

1312

11. Standard & Flow diagram

RO BASIC

MFP

1320A

4.0 kg

500WX115DX310H(mm)

※ Information on the plug for electricity power is not applicable for MFP

1320A model since it has no UV sterilizer.

1. Standard

2. Flow diagram

Product

Model name

Net weight

Rated voltage

Power consumption

UV sterilizer

Dimention

RO ADVANCED

MFP

1440A

4.2 kg

100

240V~, 50/60Hz

Membrane

ﬁlter

Tap

Water

Drain

Water

TANK

Flow regulator

Water intake

(Cork)

AUTO SHUT OFF V/V

CHECK V/V

TEE EQL 1/4”

Pre

complex

ﬁlter

Post

Carbon

Block

Filter

(5m)

Sterilizer

12. Troubleshooting

Symptoms Symptoms No

When ambient

water is not

served

Is tap water being supplied?

Request A/S

Wait until the tap water

stops ﬂowing.

Is the adapter (source

water valve) open?

Has not it been used for a

long time?

Is it time to replace

the ﬁlters?

Place the water source

valve opened.

Request A/S Use after draining water

Request A/S Request ﬁlter replacement

Is the leakage coming from

inside the puriﬁer? -Request A/S after closing

water source valve.

When puriﬁed

water tastes

strange

When water

leakage occurs

Yes

1514

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Accessori popolari di altre marche

Hillco

Hillco 2810 Manuale utente

Siemens

Siemens QSA2700D Manuale dell'operatore

Contours

Contours ZY024 Manuale utente

Saivod

Saivod VS621 Manuale utente

Virtuox

Virtuox VirtuCLEAN 2.0 Manuale utente

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuale utente

Z-Wave

Z-Wave HSD-200Z Manuale utente

turck

turck FMX-IM-2UPLI63FX Manuale utente

Decagon Devices

Decagon Devices 10HS Manuale utente

UPPAbaby

UPPAbaby Cup Holder Manuale utente

Elko

Elko SmartSensor Leakage Wireless Manuale utente

Grizzly

Grizzly H8371 Manuale utente

Panasonic

Panasonic HG-T Series Manuale utente

IFM Electronic

IFM Electronic Efector 250 Series Guida di riferimento

DigiDesign

DigiDesign 888/24 I/O Manuale utente

PROZIS

PROZIS QUAY Manuale utente

patagonia

patagonia PSI Vest Manuale utente

SFC Energy

SFC Energy EFOY GO! Manuale utente