GENERAL SAFETY PRECAUTIONS
•ALWAYS learn the machine’s applications, limitations and specific potential
hazards peculiar to it. Read and become familiar with the entire operating manual.
•ALWAYS ensure that the local supply voltage corresponds with the supply
information on the machine’s data plate.
•ALWAYS check for damage before use, any damaged part should be checked
to ensure that it will operate properly and perform it’s intended function. Check
for alignment of moving parts, breakage of parts, mountings, and any other
condition which may effect the machine’s operation. Any damage should
be properly repaired or the part replaced . If in any doubt DO NOT use the
machine. Consult your local CLARKE dealer.
•ALWAYS keep children away. All visitors should be kept at a safe distance
from the work area, especially whilst operating the machine.
•
ALWAYS maintain machine in top condition. Keep the machine clean for best
performance. Follow maintenance instructions.
•
ALWAYS handle with extreme care, do not carry the machine by it’s electrical
cable, or yank the cable to disconnect it from the power supply.
•ALWAYS concentrate on the job at hand, no matter how trivial it may seem. Be
aware that accidents are caused by carelessness due to familiarity.
•ALWAYS wear proper apparel. Loose clothing or jewellery may get caught in
moving parts. Wear protective hair covering to contain long hair.
•ALWAYS remove plug from the electrical outlet when adjusting, changing parts,
or when working on the machine.
•ALWAYS use recommended accessories, the use of improper accessories could
be hazardous.
•ALWAYS guard against electric shock. Safety can be further be improved by
using a residual current device (RCD).
•ALWAYS ensure that the power supply used to power the machine is connected
to an efficient grounding system.
•ALWAYS store the machine out of the reach of children, DO NOT allow children
to operate the machine.
•NEVER operate the machine when under the influence of drugs, alcohol or
any medication.
•NEVER leave the machine running unattended. Turn power OFF. Do not leave
the machine until it comes to a complete stop.
•NEVER force the machine, it will do a better and safer job at the rate for which
it was designed.
• DO NOT use the machine if the electrical cable, plug or motor is in poor condition.
WARNING:
As with all machinery, there are certain hazards involved with their operation
and use. Exercising respect and caution will considerably lessen the risk of
personal injury. However, if normal safety precautions are overlooked or
ignored, personal injury to the operator or damage to property, may result.
3
