Clas Ohlson M848-UK Manuale utente
www.clasohlson.com
SVENSKANORSKSUOMI ENGLISH
DVD/MPEG4 Player
DVD/MPEG4-spelare
DVD/MPEG4-spiller
Dvd-/MPEG4-soitin
Art.no. Model
18-8109 M848-UK
38-3303 M848 Ver. 200906
ENGLISH
CAUTION !
RISK OF ELECTRIC
SHOCK DO NOT OPEN
CLASS 1
LASER PRODUCT
DVD/MPEG4 Player
Art.no.18-8109 Model M848-UK
8-0 M848
Please read the entire instruction manual before using the product and save it for future reference.
We reserve the right for any errors in text or images and any necessary changes made to technical data.
If you have any questions regarding technical problems please contact Customer Services.
Safety
Caution:
Do not open the casing! Certain components within the product’s
casing contain dangerous currents. Contact with these may give you
an electric shock.
• The product should only be repaired by qualied service personnel.
• The product should not be disassembled or modied.
• The product is designed for indoor use only.
• Never expose the device to high temperatures, blows, damp or moisture.
• Do not place the product where it could fall into water or other types of liquid. Do not place containers
with liquid on the product e.g. ower vases, coffee cups, zzy drink bottles, etc.
• Do not place the device in a damp, dusty environment or where there are heavy vibrations.
• Shut off the standby function at night or when travelling.
• The standby switch on the front of the device does not disconnect the device from the mains. To com-
pletely turn off the device the switch on the back of the device must be set to the OFF position or the plug
must be removed from the power point.
CLASS 1 LASER PRODUCT
Caution: Do not open the casing! Invisible laser beams that can cause eye
damage. Do not look directly into the laser beam or look directly at it using
an optical instrument.
4
ENGLISH
1
1
4 7 8
4 5 6 7 8 9 10 11
5 6
9
1.2 Back panel
1. Buttons and functions
1.1 Front
1. L – Analogue audio input. Left channel via RCA connection.
2. R – Analogue audio input. Right channel via RCA connection.
3. HDMI output
4. COAXIAL – Digital audio output. SPDIF via RCA-coaxial connection.
5. Y / Pb/Cb / Pr/Cr – Component video output (3 x RCA).
6. VIDEO – Composite video output. CVBS via RCA connection.
7. S-VIDEO – S-VIDEO output via 4-pin mini-DIN.
8. 5.1 audio output – 5.1 amplier connection.
9. SCART outlet
1. STANDBY (ON/OFF)
2. Disc drawer
3. EJECT (open/close)
4. PLAY/PAUSE
5. STOP
6. PREV (previous)
7. NEXT
8. Display
9. IR sensor
10. MS/SD/MMC – Memory card slot
11. USB – Port for USB memory (note that the USB
port is only for direct connection, extension leads
should not be used).
5
ENGLISH
7
1
4
5
6
7
8
9
10
11
1
1
14
15
16
17
18
19
0
1
4
5
6
7
8
9
0
1
4
5
6
8
1.3 Remote control
1. [ STANDBY ] – Turns the system on/off
2. [ USB/CARD ] – Switches between USB
and memory cards
3. [ AUDIO ]
4. [ 0-9 ] – Numerical buttons
5. [ CLEAR ] – Clears entry
6. [ SETUP ] – Opens settings menu
7. [ ▲ ] – Up
8. [ ◄ ] – Left
9. [ ▼ ] – Down
10. [ ◄◄ ] – Rewind
11. [ ►► ] – Fast forward
12. [ STEP ] – Advances images frame
by frame
13. [ ■ ] – Stops playback
14. [ VOL + - ] – Volume up/down
15. [ L/R ]
16. [ N/P ]
17. [ SLOW ] – Slow motion playback
18. [ V-MODE ]
19. [ HD/Res ] (HD mode)
20. [ PROGRAM ] – Programmed playback
21. [ OPEN/CLOSE ] – Opens/closes disc tray
22. [ SEARCH ] – Searches for section
23. [ SUBTITLE ] – Selects subtitles
24. [ MENU ] – Selects the DVD disc menus
25. [ TITLE ]
26. [ DISPLAY ]
27. [ ► ] – Right
28. [ ENTER ] – Conrms settings
29. [ ►►| ] – Next track/chapter
30. [ |◄◄ ] – Previous track/chapter
31. [ ►|| ] – Starts/pauses playback
32. [ A-B ] – Plays a section
33. [ REPEAT ] – Activates repeated playback
34. [ MUTE ] – Turns off volume
35. [ ANGLE ] – Selects picture angle
36. [ PBC ]
37. [ RETURN ]
38. [ ZOOM ] – Increases picture size
6
ENGLISH
1.4 Compatible media types
• DVD Single/double sided with one or two layers:
DVD+R/DVD+RW
DVD-R/DVD-RW
• CD-DA (CD-Digital Audio)
• MP3
• MPEG4
• CD-R / CD-RW
• Photo CD (JPEG)
• Memory cards USB-memory
MS (Memory Stick)
SD (Secure Digital)
MMC (Multimedia Card)
2. Care
2.1 Cleaning
• Always unplug from the wall socket before cleaning.
• Make sure that no liquids penetrate the player.
• Use only a damp cloth when cleaning the exterior.
• Never use strong solvents or detergents.
2.2 Caring for discs
• Hold the disk by the hole and edge when handling in order to avoid ngerprints and dirt from
contaminating the disk.
• Do not bend the disk or expose it to direct sunlight or heat.
• Store the discs upright in their cases.
• Clean the disks with soft dry cloth starting from the centre and working outwards. Never use solvents or
strong detergents.
3. Preparations
3.1 Unpacking the product
Contents
• DVD Player
• Remote control
• Instruction manual
Inserting batteries into the remote control
1. Remove the battery cover.
2. Insert two AAA/LR03 batteries (not included) into the battery compartment.
3. Ensure that the batteries are inserted correctly according to the markings in the battery compartment.
Replace the battery cover.
N.B.
• Always change both batteries simultaneously.
• Always remove batteries from the remote if it will not be used for an extended period in order to avoid
possible battery leakage.
7
ENGLISH
4. Connections
When transferring images using a cable there are several types of signal and connectors to choose from.
N.B.
• Turn off the DVD player and TV before making any connections.
• Read your TV or stereo manual before connecting.
4.1 Connecting to the TV
The DVD player can be connected to the TV in several ways depending on the connections on your TV.
The most common and simplest connection is with a SCART lead
• SCART (9) Both audio and video are transferred to the TV. Connect a SCART lead (not included) bet-
ween the SCART output on the DVD player and the TV’s SCART input.
o The cable transfers both audio and video.
o Select the TV’s AV channel.
o Press the V-MODE button on the remote to change the DVD player’s outgoing signal for the best
possible signal for your particular TV.
o For most users this type of installation will sufce.
Other connections
Besides the SCART lead, the DVD player can be connected in several other different ways. Below is a short
description of the different signals the DVD player is able to produce.
Important. In the below example we use a TV for connecting the DVD player but it works just as well to con-
nect the player to a projector, plasma TV or other video display equipment with similar connections. Refer to
your TV’s instruction manual about which signals and connections are possible for you to use.
We refer to different image qualities which are theoretical and can differ greatly in practice since the various
combinations of different products can give inconsistent results.
PAL and NTSC are two different TV systems. NTSC is used mostly in the USA. PAL is normally used in
Western Europe.
Image quality can differ depending on whether the DVD is recorded in PAL or NTSC and if the DVD player is
set to PAL or NTSC.
Most TVs and DVDs in the Nordic countries and the UK are designed for PAL. This is preferable because
this gives a higher resolution than NTSC.
8
ENGLISH
• HDMI (3) – Digital connection for the transferring of audio and video. Connects the TV to the HDMI input.
• Composite video (6) and L-R (1)(2) (analogue audio output).
The composite video output must be activated in the menu.
o Composite video signals (CVBS) can be handled by all TVs. The easiest solution is to use a SCART
lead since SCART is capable of transferring both video (composite video) and audio. Composite
video can even be sent by a separate lead from the DVD player’s composite video output on the
back panel.
o The lead is connected to the equivalent input on the TV (normally Video In).
o Press the V-MODE button on the remote to change the DVD player’s outgoing signal for the best
possible signal for your particular TV.
• S-video (7) and L-R (1)(2) (analogue audio output). S-video (Y/C) gives a higher image quality than
composite video and is preferable if your TV supports this type of signal. (Refer to your TV manual.)
o S-Video is connected via a 4-pin mini-DIN (normally called an s-video connector). The DVD player’s
settings may possibly need to be changed in the menu in order to send an s-video signal.
o Press the V-MODE button on the remote in order to change the DVD player’s outgoing signal to
S-video.
o N.B. If your TV does not support s-video the picture will be black and white.
• Component video (5) and L-R (1)(2) (analogue audio output).
The DVD player can send a component signal as interlace or as progressive scan. Refer to your TV
manual to see if interlace or progressive scan is supported.
o The component video signal uses the three RCA sockets on the DVD player’s back panel and is
connected to the equivalent input on the TV.
o Press the V-MODE button on the remote in order to change the DVD player’s outgoing signal
between interlace and progressive scan.
Caution:
Never connect an amplier to the digital audio output if it does not have Dolby Digital AC3 or a DTS decoder.
This can damage the amplier, speakers, or cause hearing damage during DVD playback.
9
ENGLISH
5. DVD player functions
The buttons described are valid for both the DVD player and the remote control.
POWER/STANDBY
Turns the player on/off.
OPEN/CLOSE/EJECT
Opens/closes the disc drawer.
SUBTITLE
Changes the subtitle language (only DVDs with subtitles).
AUDIO
Change the track/language (only DVDs which have different tracks/languages).
SEARCH
• DVDs: Jumps to a given section or playback time. Use ▲ or ▼ to select and enter the playback
time/section with the numerical keypad. Conrm using ENTER.
• SVCDs, VCDs and CDs: Jumps to a specic playback time. Use ▲ or ▼ to select and enter the
playback time with the numerical keypad. Conrm using ENTER.
0-10+ (numerical keypad)
Used to enter the time, chapter/section and track number for searches.
CLEAR
Deletes the numerical keypad entry.
MENU
Jumps to the DVD disc menu when pressed during playback (only for DVDs which have this feature).
SETUP
Selects the DVD player’s setup menu.
DISPLAY
Displays information on the current DVD.
TITLE
Jumps to the current DVD’s title menu (only for DVDs).
▲▼◄►
Used to navigate the DVD player’s menus.
ENTER
Conrms your menu selections.
REV - ◄◄
Rewinds within a track/chapter. Pressing PLAY/PAUSE restarts normal playback.
2x, 4x, 8x, 16x and normal playback.
FWD - ►►
Fast-forwards within a track/chapter. Pressing PLAY/PAUSE restarts normal playback.
2x, 4x, 8x, 16x and normal playback.
PREV- |◄◄
Jumps to the previous track/chapter.
NEXT - ►►|
Jumps to the next track/chapter.
STEP
Pauses the picture. Advances the picture frame by frame (does not function for CD or MP3 playback).
Pressing PLAY/PAUSE restarts normal playback.
STOP
Temporarily stops playback and resumes playback from the same point. Pressing STOP again discontinues
playback completely and returns to the beginning of the disc.
10
ENGLISH
PLAY/PAUSE
Pauses/starts the disc during playback.
VOL- / VOL+
VOL+ increases volume. VOL- decreases volume.
REPEAT
• Repeats a chapter/section or the entire DVD (title) by pressing repeatedly.
• Repeats a track (single) or entire (all) VCDs or CDs by pressing repeatedly.
• N.B. When playing VCDs the PBC (Playback Control) setting must be turned off.
L/R
Selects audio channel during CD/VCD/SVCD playback (left/right/mix/stereo).
A-B
(Repeating a section)
• Pressing A-B during playback marks the beginning of a section (A). Pressing again marks the end of the
section (B) to be repeated. Playback of the marked section should now occur automatically. Pressing A-B
again cancels repetition of the section and erases the marked points.
• N.B. For CD/VCD/SVCD playback, the marked points A and B must lie within the same track.
For DVD playback, the marking points can be in different chapters/sections.
ANGLE
Changes the picture angle (if the DVD supports this).
MUTE
Turns off the volume completely. Resumes previously set volume when pressed again.
USB/CARD
Switches between between USB memory and memory cards.
N/P
Selects the picture standard in stop mode, AUTO, NTSC or PAL.
PBC
Turns on/off PBC (Playback Control) during VCD/SVCD playback.
SLOW
Reduces playback speed during DVD/VCD/SVCD playback. Pressing PLAY/PAUSE restarts
normal playback.
V-MODE
Selects the outgoing video signal S-VIDEO, COMPONENT, RGB or P-SCAN in stop mode.
RETURN
Returns to the main menu during VCD/SVCD playback with PBC activated.
PROGRAM
No available functions for this model.
HD/RES
Changes the resolution when the DVD is set to HD mode.
ZOOM
Enlarges the image for every press of the button (works only if supported on the DVD).
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali Clas Ohlson Lettore DVD
Clas Ohlson
Clas Ohlson M251-UK Manuale utente
Clas Ohlson
Clas Ohlson DV2136-UK Manuale utente
Clas Ohlson
Clas Ohlson BDU186E Manuale utente
Clas Ohlson
Clas Ohlson DV5631-UK Manuale utente
Clas Ohlson
Clas Ohlson M841-UK Manuale utente
Clas Ohlson
Clas Ohlson DPU3270V+SSD70S-UK Manuale utente
Clas Ohlson
Clas Ohlson M829 Manuale utente
Clas Ohlson
Clas Ohlson PDVD-12809B-UK Manuale utente
