3.4 Water connection :
The appliance comes with a water supply hose requiring a G¾” (¾” BSP) male
threaded connection at the mains water supply, upon installation and
commissioning all water joints must be checked for leaks.
New hoses supplied are to be used. Old existing, defective or damaged water
supply hoses are NOT to be used when installing the appliance.
Commercial appliance wash results will be effected by external conditions such
as incoming water temperature, pressure, harness and choice of chemicals.
For the longevity of any water related devices and to ensure you get consistently
good results it is essential your machine is either fed from a soft water supply , or
your Classeq appliance is connected to an appropriate water softener.
IMPORTANT - All supplier warranties are void if lime scale is present within
an appliance.
Page 4
3.3.1 Electrical rating :
Within the ‘Classeq’ range several of the 500mm² basket appliances can
be either down rated or up rated electrically, such a procedure MUST be
carried out by a ‘Classeq’ approved technician.
The down / up rating of the machine is carried out by configuring the
terminal block within the appliance to the following
13 Amp – Single phase
• Links removed between L1, L2 and L3
• Ensure link remains between neutrals (N)
30 Amp – Single phase
• Ensure all link remains between lives
terminals (L1, L2 and L3)
• Ensure link remains between neutrals (N)
Three phase
Only Eco3 and H750 appliances can be converted to three phase, this is performed
by removing electrical links at the terminal between L1 L2 & L3, then installing a new
5 core supply cable, i.e. L1, L2, L3, N and Earth (PE).
FOR ADVISE on water softeners and appropriate chemicals, please contact :
Sales
℡
0844 2245 249
sales@classeq.co.uk
