Clavis 82021 Code-Combi K Extended Guida rapida

Operational Instructions

82021 Code-Combi K

Extended version

CLAVIS Deutschland GmbH

Grüner Weg 38

34117 Kassel

Telefon: +49 (0)561 988 499-0 Internet: www.tresore.eu

E-Mail: [email protected] www.tresorschloss.de

Contents

1 Working instructions .................................................................................................. 18

2 Signals and what they mean...................................................................................... 19

3 Operational modes ..................................................................................................... 20

4 Lock functions ............................................................................................................ 21

4.1 Parallel mode function ............................................................................................... 21

4.1.1 Opening with primary or secondary code

4.1.2 Opening after 3 or more incorrect code entries penalty time

4.1.3 Alteration of primary code by primary code holder

4.1.4 Switching on secondary code by primary code holder

4.1.5 Alteration of secondary code by secondary code holder

4.1.6 Cancellation of secondary code by primary code holder

4.1.7 Locking

4.2 Delegated dual code mode function......................................................................... 24

4.2.1 Switching on dual code by primary code holder

4.2.2 Opening

4.2.2.1 Opening with primary code by primary code holder

4.2.2.2 Opening with dual code by dual code holder

4.2.3 Opening after 3 or more incorrect code entries penalty time

4.2.4 Alteration of primary code by primary code holder

4.2.5 Cancellation of dual code by primary code holder

4.2.6 Locking

4.3 Ordinary dual code mode function ........................................................................... 27

4.3.1 Activation of ordinary dual code mode by primary code holder

4.3.2 Opening with dual code by dual code holder

4.3.3 Opening after 3 or more incorrect code entries penalty time

4.3.4 Alteration of dual code by dual code holder

4.3.5 Cancellation of ordinary dual code mode

4.3.6 Locking

4.4 Time delay (TD) and opening window (OW) functions ............................................ 29

4.4.1 Switching on/alteration of the TD/OW

4.4.2 Opening with programmed TD/OW

4.4.3 Cancellation of programmed TD/OW

5 Power supply............................................................................................................... 31

5.1 Changing the battery.................................................................................................. 31

5.2 Emergency power supply .......................................................................................... 32

CLAVIS Deutschland GmbH

Grüner Weg 38

34117 Kassel

Telefon: +49 (0)561 988 499-0 Internet: www.tresore.eu

E-Mail: [email protected] www.tresorschloss.de

1 Working instructions

Important points

• Before putting the lock into operation, please read the instructions carefully.

• All instructions exclusively refer to the lock and not to possible control elements of the

safe.

• Carry out the programming sequences with the lock and the safe opened.

• Every correct entry keyed in and recognised by the lock is conﬁrmed by an acoustic signal.

These conﬁrmation signals are not taken into consideration in the following notes.

• You have 20 seconds for each entry keyed in. If you have not pressed a key within this 20

second period, the electronic system will close down automatically. Operations not fully

completed have to be re-started.

• Code entries can be interrupted by pressing the Pbutton.

• The lock is set at the works code 123456when supplied. Alter this immediately to your

own personal code for security reasons. Do not use any personal or other similarly well

known data when selecting this code.

General instructions

• The lock is designed for use from +10° C to +50° C.

• The lock should be cleaned using a damp cloth only (do not use any aggressive cleaning

agents).

• The lock must not be lubricated.

• Never open the lock casing. Should dismantling be required on the ﬁttings, please carry

this out in strict accordance with the operational instructions provided. Failure to comply

with this will endanger the correct functioning of the lock and result in your losing warranty

entitlements.

CLAVIS Deutschland GmbH

Grüner Weg 38

34117 Kassel

Telefon: +49 (0)561 988 499-0 Internet: www.tresore.eu

E-Mail: [email protected] www.tresorschloss.de

2 Signals and what they mean

Plastic control unit:

Diagram 1: Control unit

Symbol Signal Meaning

1 x Green LED ﬂashes once Valid 6-digit code entered

Green LED remains lit up Lock is ready for programming

3 x Red LED ﬂashes 3 times

Invalid code entered or

entry suspended by pressing P

button

10 x Red LED ﬂashes 10 times

after ON button pressed Insufﬁcient voltage

1, 2, 4, 8 or

16 minutes Red LED ﬂashes every second for

1, 2, 4, 8 or 16 minutes

after ON button pressed

Lock is in blocked status

Red LED ﬂashes every 5 seconds Lock is in time delay status

3 x Red and green LED ﬂash

alternately 3 times

Lock was last opened with

another code

/ Green LED ﬂashes every 5 seconds

accompanied by an acoustic signal Lock is in opening window status

1 x Acoustic signal sounds once End of opening window period

2 x Acoustic signal sounds twice New 6-digit code entered

3 x Acoustic signal sounds 3 times Invalid 6-digit code entered

green LED red LED

bar handle

CLAVIS Deutschland GmbH

Grüner Weg 38

34117 Kassel

Telefon: +49 (0)561 988 499-0 Internet: www.tresore.eu

E-Mail: [email protected] www.tresorschloss.de

3 Operational modes

The lock can be opened with a single code (primary code), with two codes (primary or se-

condary code), or with a dual code (1st and 2nd partial codes). Only the holder of the overriding

primary code is able to release the secondary code and the dual code.

Primary Code: 6-digit secret combination

Secondary Code: Additional 6-digit combination for a further user of the safe

Dual Code: A 12-digit combination made up of two 6-digit codes for two users of the safe.

Both users must enter their 6-digit code to complete the combination (mutual

check principle).

Three different operational modes are available. The following diagrams depict the different

modes to be used for opening.

Parallel mode is set by the works and the works primary code is 1 2 3 4 5 6. No secondary

code is set by the works.

I. parallel mode

secondary

code



primary code



II. delegated dual code mode

dual code



primary code



III. ordinary dual code mode

dual code



CLAVIS Deutschland GmbH

Grüner Weg 38

34117 Kassel

Telefon: +49 (0)561 988 499-0 Internet: www.tresore.eu

E-Mail: [email protected] www.tresorschloss.de

4 Lock functions

The lock should only be programmed with the lock and safe opened.

4.1 Parallel mode function

secondary

code



primary code



4.1.1 Opening with primary or secondary code

1) Press ON

2) Enter valid 6-digit primary or secondary code 1 x

3) Within 4 seconds turn bar handle clockwise until stop position reached

If the lock was last opened with a different code, the signal 3 x appears.

4.1.2 Opening after 3 or more incorrect code entries penalty time

After 3 incorrect entries the lock goes into a one minute blocked status. The period in which

the lock is blocked is extended to 2, 4, 8 and a maximum of 16 minutes every time an

incorrect code is entered. During this period the red LED ﬂashes every second and it is not

possible to enter any further codes. When the blocked period is over, ON may be pressed

again at any time.

1) Press ON

2) Enter valid 6-digit code 1 x

Signal: Invalid 6-digit code was entered during former opening attempt 3 x

3) Within 4 seconds turn bar handle clockwise until stop position reached

CLAVIS Deutschland GmbH

Grüner Weg 38

34117 Kassel

Telefon: +49 (0)561 988 499-0 Internet: www.tresore.eu

E-Mail: [email protected] www.tresorschloss.de

4.1.3 Alteration of primary code by primary code holder

1) Open lock with valid 6-digit primary code (see 4.1.1)

2) Press ON

3) Press P

4) Enter valid 6-digit primary code

5) Enter new 6-digit primary code / 2 x

6) Enter new 6-digit primary code again 1 x

7) Test newly programmed primary code by locking and opening once

If the new primary code as per 6) was incorrectly conﬁrmed, the signal 3 x appears.

Repeat the sequence.

4.1.4 Switching on secondary code by primary code holder

1) Open lock with valid 6-digit primary code (see 4.1.1)

2) Press ON

3) Press P

4) Enter valid 6-digit primary code

5) Press P

6) Press 3

7) Enter new 6-digit secondary code / 2 x

8) Enter new 6-digit secondary code again 1 x

9) Test newly programmed secondary code by locking and opening once

If the new secondary code as per 8) was incorrectly conﬁrmed, the signal 3 x appears.

Repeat the sequence.

CLAVIS Deutschland GmbH

Grüner Weg 38

34117 Kassel

Telefon: +49 (0)561 988 499-0 Internet: www.tresore.eu

E-Mail: [email protected] www.tresorschloss.de

4.1.5 Alteration of secondary code by secondary code holder

1) Open lock with valid 6-digit secondary code (see 4.1.1)

2) Press ON

3) Press P

4) Enter valid 6-digit secondary code

5) Enter new 6-digit secondary code / 2 x

6) Enter new 6-digit secondary code again 1 x

7) Test newly programmed secondary code by locking and opening once

If the new secondary code as per 6) was incorrectly conﬁrmed, the signal 3 x appears.

Repeat the sequence.

4.1.6 Cancellation of secondary code by primary code holder

1) Open lock with valid 6-digit primary code (see 4.1.1)

2) Press ON

3) Press P

4) Enter valid 6-digit primary code

5) Press P

6) Press 01 x

By pressing the key combination Pand 0all the functions programmed (secondary code,

dual code, time delay, opening window) are deleted.

4.1.7 Locking

In conjunction with a boltwork: After the door has been closed the boltwork must be locked

and the lock closed.

1) Turn bar handle counter clockwise until stop position reached

CLAVIS Deutschland GmbH

Grüner Weg 38

34117 Kassel

Telefon: +49 (0)561 988 499-0 Internet: www.tresore.eu

E-Mail: [email protected] www.tresorschloss.de

4.2 Delegated dual code mode function

dual code



primary code



4.2.1 Switching on dual code by primary code holder

1) Open lock with valid 6-digit primary code (see 4.1.1)

2) Press ON

3) Press P

4) Enter valid 6-digit primary code

5) Press P

6) Press 5

7) Enter new 6-digit 1st part of combination / 2 x

8) Enter new 6-digit 1st part of combination again 1 x

9) Enter new 6-digit 2nd part of combination / 2 x

10) Enter new 6-digit 2nd part of combination again 1 x

11) Test newly programmed dual code by locking and opening once more

If the new partial combinations are not correctly conﬁrmed, the signal 3 x appears.

Repeat the sequence.

The correct sequence of the partial combinations and its repeated conﬁrmation must be

adhered to.

4.2.2 Opening

4.2.2.1 Opening with primary code by primary code holder

1) Press ON

2) Enter valid 6-digit primary code 1 x

3) Within 4 seconds turn bar handle clockwise until stop position reached

If the lock was last opened with the dual code, the signal 3 x appears.

CLAVIS Deutschland GmbH

Grüner Weg 38

34117 Kassel

Telefon: +49 (0)561 988 499-0 Internet: www.tresore.eu

E-Mail: [email protected] www.tresorschloss.de

4.2.2.2 Opening with dual code by dual code holder

1) Press ON

2) Enter valid 6-digit 1st part of combination 1 x

3) Enter valid 6-digit 2nd part of combination 1 x

4) Within 4 seconds turn bar handle clockwise until stop position reached

If the lock was last opened with the primary code, the signal 3 x appears.

The correct sequence of the partial codes must be adhered to. In order to open the lock the

1st part of the combination has to be entered followed by the 2nd part of the combination.

4.2.3 Opening after 3 or more incorrect code entries penalty time

After 3 incorrect entries the lock goes into a one minute blocked status. The period in which

the lock is blocked is extended to 2, 4, 8 and a maximum of 16 minutes every time an

incorrect code is entered. During this period the red LED ﬂashes every second and it is not

possible to enter any further codes. When the blocked period is over, ON may be pressed

again at any time.

1) Press ON

2) Enter valid code 1 x

Signal: Invalid code was entered during former opening attempt 3 x

3) Within 4 seconds turn bar handle clockwise until stop position reached

4.2.4 Alteration of primary code by primary code holder

1) Open lock with valid 6-digit primary code (see 4.2.2.1)

2) Press ON

3) Press P

4) Enter valid 6-digit primary code

5) Enter new 6-digit primary code / 2 x

6) Enter new 6-digit primary code again 1 x

7) Test newly programmed primary code by closing and opening once

If the new primary code as per 6) was incorrectly conﬁrmed, the signal 3 x appears.

Repeat the sequence.

CLAVIS Deutschland GmbH

Grüner Weg 38

34117 Kassel

Telefon: +49 (0)561 988 499-0 Internet: www.tresore.eu

E-Mail: [email protected] www.tresorschloss.de

Indice

Altri manuali Clavis Serratura

Clavis

Clavis WITTKOPP Primor Level 25 Manuale utente

Clavis

Clavis Alpha Series Manuale utente

Clavis

Clavis SECU S1000 Manuale utente

Manuali Serratura popolari di altre marche

Magic

Magic 105 Manuale utente

Gantner

Gantner GAT NET.Lock 7020 System Guida rapida

Wittkopp

Wittkopp Insys 7202 Manuale utente

Dorma

Dorma Studio Classic Manuale utente

Securam

Securam ECSL-601 Manuale utente

Sudhaus

Sudhaus 3003 Manuale utente

Safety 1st

Safety 1st 48517 Manuale utente

Pado

Pado FDS-10 Manuale utente

Esco

Esco systeQ Series Manuale utente

COMPX

COMPX National D8951 Manuale utente

secureo

secureo Key Box Manuale utente

Stock Loks

Stock Loks C8713 Manuale utente

COMPX

COMPX 1T-058 Manuale del proprietario

Auslock

Auslock T11 Manuale utente

ELCOM

ELCOM 7205 Manuale utente

Stealth SAFES

Stealth SAFES ShadowVault Manuale utente

Knox

Knox KeySecure 5 Manuale utente

Kwikset

Kwikset 48334/01 Manuale utente