Clean Water Systems Pro-OX 5700-E Istruzioni operative

Clean Water Made Easy

http://www.cleanwaterstore.com

5700-E Programming Guide

Questions?

Call us toll‐free: 1‐888‐600‐5426 or 1‐831‐462‐8500

Email us:

support@cleanwaterstore.com

See more information on our website:

www.cleanwaterstore.com

Normal Operation

Time Mode: Home screen will display

days and hours left until the unit

regenerates.

Meter Mode: Meter mode tracks the number of gallons used instead of

regenerating on a specific time. In this

mode immediate regeneration will

occur once the unit hits its target

calculated number of gallons based on

hardness settings.

Timed Meter Mode: Timed Meter Mode tracks the number gallons used, like the

Meter Mode, but waits until its set

time to regenerate instead of

immediately. A buffer period is

factored in to prevent you from

running out of soft water. The water

droplet to the right of Current Time

signifies the unit tracking water flow.

Meter & Timed Meter Menus

The following menus will allow you to change the current time, unit hardness, and

calendar day override settings within the Meter and Timed Meter Modes.

Current Time settings: Press the

gear to begin menus. Current

time and period of the day will

be flashing.

After pressing the Regen button,

only the hour portion will be

flashing.

Use the up and down arrows to

adjust the time. Press the gear

again to switch to the minute

portion. Note, once the timer

passes a 12 hour period it will

automatically change A.M. to

P.M.

Unit Hardness settings: Hard-25

will be flashing.

Pressing the Regen button will

allow changes to hardness to be

made. The unit has a range of 1-99

grains per gallon.

Meter and Time Meter Menus continued..

Calendar Day Override setting:

Allows user to set a time to

regenerate by if the unit hasn’t

met its set meter amount within

that time period.

Pressing the Regen button allows

you to change the days. Default

setting is 0 days, but can range

from 0-99 days.

Time Menus

The following menus will let you change the Current Time and the Regeneration

Day for Time Mode only.

Current Time settings: Press gear

to begin menus. Current time and

period of the day will be flashing.

After pressing the Regen button,

only the hour portion will be

flashing.

Use the up and down arrows to

adjust the time. Press the gear

again to switch to the minute

portion. Note, once the timer

passes a 12 hour period it will

automatically change A.M. to P.M.

Pressing the gear again brings you

to the Regeneration day setting.

Time Menus Continued..

Using the up and down arrows,

you can set the number of days

you wish to have between

regenerations. The unit has a

range of 1-99 days. Default

setting is 7 days.

Advanced Menus

Within the Advance Menus the Regeneration Mode, Regeneration Cycle Period

Lengths, and Unit Capacity are adjustable.

To enter, press both the

Gear and Regen button at

the same time. All mode

types will be flashing.

Press the Regen button

again to select the mode

type you wish to be in.

Use the up and down

arrow to scroll through

the modes.

Advanced Menus Continued..

After selecting the mode, the time of

day the unit is set to regenerate will

appear.

Pressing the Regen button will allow

the time to be changed. Use the up

and down arrows to adjust the hours

and A.M. and P.M. settings.

Pressing the gear again will bring

you to phase 1, Backwash. BW will

be present and P1-10 will be

flashing.

Total minutes spent in backwash will

be flashing. The unit can be

programmed for 0-99 minutes.

Next menu displays brine draw

settings. BD will be present and P2-60

will be flashing.

Advanced Menus Continued..

Total minutes the unit draws brine will

be flashing. Unit can be set anywhere

from 0-99 minutes.

This menu displays Rapid Rinse

settings. RR will be present and P3-

12 will be flashing.

Total minutes the unit rinses will be

flashing. Unit can be set anywhere

from 0-99 minutes.

This menu displays Brine Refill

settings. BF will be present and P4-

10 will be flashing.

Total minutes the unit fills the brine

tank for will be flashing. Unit can be

set anywhere form 0-99 minutes.

Advanced Menus Continued..

This last menu is to change the

unit’s capacity.

Unit has a range of 1-199 Capacity

(for Meter and Timed Meter

Modes only). Multiply capacity

setting by 1000 to get grains.

Example: A setting of 064 is equal

to 64,000 grain capacity.

*Gallons = (Capacity/Hardness) x .75 (Timed Meter Mode only)

*Gallons = (Capacity/Hardness) (Meter Mode only)

Immediate Regeneration

While in service position, hold the Regen button in for 5-6 second to initiate an

immediate regeneration.

Pressing the Regen button again will jump to the next

cycle phase. Holding the two arrow buttons together

will terminate Immediate Regeneration and return the

unit to service position.

Restore Factory Settings

Hold the Regen button while plugging in the power supply to the unit. After the

unit has powered up release Regen button.

Next press the Regen button

again to select no next to

reset.

Using the down arrow, scroll

to yes.

Hitting the Gear will begin

resetting the unit.

Power Outage Memory.

During a loss of power, all program settings will be stored in permanent memory.

The current valve position, cycle step and time of day are all stored as well, but

upon power up a reset of the current time will be necessary.

If the unit were to lose power during a regeneration stage, the valve will return

back to its prior position when the outage occurred. The unit will take 4 -5

minutes to reset back to that position.

Altri manuali per Pro-OX 5700-E

Indice

Altri manuali Clean Water Systems Sistema di filtraggio dell'acqua

Clean Water Systems

Clean Water Systems 7500-C Manuale utente

Clean Water Systems

Clean Water Systems Pro?OX 2510 Manuale di installazione

Clean Water Systems

Clean Water Systems Up-Flow Carbon Manuale di installazione

Clean Water Systems

Clean Water Systems Greensand 5700-E Manuale di installazione

Clean Water Systems

Clean Water Systems Fleck 5600 Softener Manuale di installazione

Clean Water Systems

Clean Water Systems PRO-OX 7000-SXT Manuale di installazione

Clean Water Systems

Clean Water Systems Ozone 500-i Manuale utente

Clean Water Systems

Clean Water Systems 7500-REV2.5 Manuale utente

Clean Water Systems

Clean Water Systems 5900e-AIR Manuale di installazione

Clean Water Systems

Clean Water Systems Tannin 5900e Series Manuale di installazione

Clean Water Systems

Clean Water Systems 7500-M Manuale di installazione

Clean Water Systems

Clean Water Systems Pro?OX 2510 Manuale di installazione

Clean Water Systems

Clean Water Systems 5900-BT Tannin Filter Istruzioni operative e di sicurezza

Clean Water Systems

Clean Water Systems 7500-REV2.5 Manuale utente

Clean Water Systems

Clean Water Systems Fleck 7000 Greensand Manuale di installazione

Clean Water Systems

Clean Water Systems Tannin 5900e Series Manuale di installazione

Clean Water Systems

Clean Water Systems MangOX 7000-SXT Manuale di installazione

Clean Water Systems

Clean Water Systems Fleck 7000 Greensand Manuale di installazione

Clean Water Systems

Clean Water Systems Tannin 5900e Series Manuale di installazione

Clean Water Systems

Clean Water Systems 7500-REV4 Manuale utente

Clean Water Systems

Clean Water Systems 5900-BT Greensand Filter Istruzioni operative e di sicurezza

Clean Water Systems

Clean Water Systems Greensand 7500 Manuale di installazione

Clean Water Systems

Clean Water Systems J-PRO-22 Manuale di installazione

Clean Water Systems

Clean Water Systems 5900BT-SIDE-AIR Istruzioni operative e di sicurezza

Manuali Sistema di filtraggio dell'acqua popolari di altre marche

Wisy

Wisy LineAir 100 Manuale utente

Schaffner

Schaffner Ecosine FN3446 Series Manuale operativo

Pentair

Pentair FLECK 4600 SXT Guida utente

H2O International

H2O International H20-500 Manuale utente

Renkforce

Renkforce 2306241 Manuale utente

Neo-Pure

Neo-Pure TL3-A502 Manuale utente

FLTR

FLTR OBF Manuale utente

STA-RITE

STA-RITE VERTICAL GRID DE FILTERS S7D75 Manuale utente

Applied Membranes

Applied Membranes W-G844EM Manuale utente

BEGA

BEGA 116 Manuale utente

WATA

WATA Standard Manuale utente

Price

Price FFU series Manuale

Gaggenau

Gaggenau BRITA INTENZA 467873 Manuale utente

Brita

Brita SAFF-100 Manuale utente

HEISSNER

HEISSNER FPU24000-00 Manuale utente

BGS technic

BGS technic 1518 Manuale utente

Reverse Osmosis

Reverse Osmosis RF Series Manuale utente

ubbink

ubbink Filtramax Series Manuale utente