Clearfield StreetSmart Manuale utente

StreetSmart Small Count Fiber Hand-Off Box

Installation Manual ______________________________________________________

Manual 021728 REV A - Aug 2020

Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]

StreetSmart Small Count Fiber Hand-Off Box

Installation Manual _________________________________________________________

Manual 021728 REV A - Aug 2020

Table of Contents

Application 3

Description 3

Technical Specications 3

Congurations 4

Opening the Box 5

Installing MPO Feeder Cables 5

Installing Drop Cables 8

Mounting 10

Connector Cleaning Procedure 13

Standard Warranty 18

Proprietary Notice 19

Technical Support 19

StreetSmart Small Count Fiber Hand-Off Box

__________________________________________________________ Installation Manual

Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]

Manual 021728 REV A - Aug 2020

Application

Technical Specications

StreetSmart Small Count Fiber Hand-Off Box

Dimensions 8” H x 8” W x 3” D

Box Option Plug-and-play or patch only

Connector Types SC/APC, SC/UPC, LC/UPC, LC/APC, MPO or HMFOC

Cable Entrance Single entrance for both provider and network

Cable Grommet FLATdrop or 4.8m

Labeling Designation label on door

Mounting Options Pole, Wall or Aerial

The StreetSmart Small Count Fiber Hand-Off Box serves as

a network demarcation point between the backhaul; provid-

er to a network operator or as point demarc point for small

count MDUs. Designed with a hinged plate and 216 locking

mechanism, access is secured between craft responsibilities.

The craft-friendly GR-771 box can be mounted aerial, pole or

wall. The compact design makes it ideally suited for inside a

monopole.

Description

The StreetSmart Small Count Fiber Hand-Off Box can be

congured in either 6 or 12 terminations in both SC or LC con-

nections. The StreetSmart Small Count Hand-Off Box comes

in two conguration. The plug-and-play option utilizes an MPO

or HMFOC (hardened multiber optical connector) connector

or the patch only which comes with factory installed cable in

length up to 3000’. Designed with a tethered removable door,

lay in grommet, angled adapter for easy cleaning and testing

and no special tool requirements, makes the box extremely

craft-friendly.

Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]

StreetSmart Small Count Fiber Hand-Off Box

Installation Manual _________________________________________________________

Manual 021728 REV A - Aug 2020

Congurations

MPO Feeder

HMFOC TetheredBlunt/Stubbed

StreetSmart Small Count Fiber Hand-Off Box

__________________________________________________________ Installation Manual

Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]

Manual 021728 REV A - Aug 2020

Opening the Box

To open the Small Count Fiber Hand-Off Box and access the

top (wireless) compartment, use a standard can wrench or 7/16”

socket. The interior swinging bulkhead must also be unlocked

using a 7/16” socket to access the lower (wireline) compartment.

Installing MPO Feeder Cables

To install cables into the wireline compartment, rst remove the cable retention grommet plate1.

Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]

StreetSmart Small Count Fiber Hand-Off Box

Installation Manual _________________________________________________________

Manual 021728 REV A - Aug 2020

2. Remove the cable retention

grommet.

3. Remove the v-clamp from the top of the

toothed bracket at the entrance.

Cut the cable retention

grommet at the locations

where cables will be

installed.

Install the cable(s) into the

cable retention grommet,

slipping them in through

the side where you cut the

grommet.

StreetSmart Small Count Fiber Hand-Off Box

__________________________________________________________ Installation Manual

Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]

Manual 021728 REV A - Aug 2020

Insert the cable retention grommet back

into the slot on the wall box.

Reinstall the v-clamp, securing it in place

with the two screws and allowing the

edges of clamp to grab the jacket of the

cable(s).

Reinstall the cable retention grommet

plate, securing it in place with the two

screws.

Inspect, clean if necessary, and connect

the MPO into the pre-installed MPO adapt-

er on the bottom of the swinging bulkhead

Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]

StreetSmart Small Count Fiber Hand-Off Box

Installation Manual _________________________________________________________

Manual 021728 REV A - Aug 2020

Installing Drop Cables

To install cables into the wireless compartment, rst remove the cable retention grommet plate.1.

Remove the cable retention grommet.

Remove the v-clamp from the top of the toothed

bracket at the entrance.

StreetSmart Small Count Fiber Hand-Off Box

__________________________________________________________ Installation Manual

Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]

Manual 021728 REV A - Aug 2020

Cut the cable retention grommet at the locations where cables will be installed.

Install the cable(s) into the cable retention grommet, slipping them in through the side where you cut the grommet.

Insert the cable retention grommet back into the slot on the wall box.

Reinstall the v-clamp, securing it in place with the two screws and allowing the edges of clamp to grab the jacket of

the cable(s).

Reinstall the cable retention grommet plate,

securing it in place with the two screws.

Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]

StreetSmart Small Count Fiber Hand-Off Box

Installation Manual _________________________________________________________

Manual 021728 REV A - Aug 2020

Route the incoming ber up and around the radius

rod. Transition the ber up onto the top of the swinging

bulkhead.

Inspect, clean if necessary, and then connect the ber

into the designated adapter.

Utilize the two tie-down points and the provided velcro

to form a loop to secure the bers on top of the bulk-

head.

10.

11.

Mounting

Four mounting locations are present on the base of the hand-off box. These will be utilized to install the box to the mounting

bracket, in wall, pole, and aerial mount applications.

Indice

Altri manuali Clearfield Hardware di rete

Clearfield

Clearfield Home Deployment Kit Manuale utente

Clearfield

Clearfield CleanKit-LC-01 Manuale utente

Clearfield

Clearfield CraftSmart FiberFirst Manuale utente

Clearfield

Clearfield FieldSmart FiberFlex 2000 Manuale utente

Clearfield

Clearfield WaveSmart Circulator Manuale utente

Clearfield

Clearfield FieldSmart 96 Port PON Manuale utente

Clearfield

Clearfield StreetSmart Aerial Manuale utente

Clearfield

Clearfield FieldSmart Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente