ClearSound A50E Guida alla risoluzione dei problemi

A50E

Expandable Ampliﬁed

Handset

Installation Guide & User Manual

The ClearSounds A50E is an expandable ampliﬁed handset for use with

ClearSounds A50 Ampliﬁed Cordless Expandable Telephone System

from ClearSounds Communications v407

Thank you for selecting theA50E ExpandableAmpliﬁed Handset

from ClearSounds Communications. This manual is designed to

familiarize you with the A50E Expandable Handset setup, regis-

trationandbasicfunctions.Fordetailedoperational instructions,

please refer to the ClearSounds A50 User Manual.

Keep this manual for future reference.

Please save your sales receipt as proof of purchase in the event you need warranty

service.

Please visit our web site at www.clearsounds.com to:

· Register your product

It’s easy! Click on the Warranty Registration Tab, Complete the form and click

“submit”. It’s that simple!

· Download additional manuals and troubleshooting tips.

(See back cover for details on warranty service.)

If you need assistance, please contact our Customer Solutions Hotline at: 877-784-

1690.

IMPORTANT SAFETY INSTRUCTIONS

1. Read and understand all instructions.

2. Follow all warnings and instructions marked on the product.

3. Unplug this product from wall outlet before cleaning. Do not use liquid cleaners or

aerosol cleaners. Use a damp cloth for cleaning.

4. Do not place this product near water (for example, near a bath tub, sink or swimming

pool).

5. Do not place this product on an unstable cart, stand or table. The product may fall,

causing serious damage to the product.

6. Slots and openings in the casing are provided for ventilation. To protect it from

overheating, these openings must not be blocked by placing the product on the bed,

sofa, rug, or other similar surfaces. This product should never be placed near or

over a radiator or heat register.

7. This product should be operated only from the type of power source indicated on the

marking label. If you are not sure of the type of supply to your home, consult your

dealer or local power company.

8. Do not allow anything to rest on the power cord. Do not locate this product where the

cord will be abused by persons walking on it.

9. Never push objects of any kind into this product through casing slots as they may

touch dangerous voltage points or short out parts that could result in a risk of ﬁre or

electric shock.

10. Never spill liquid of any kind on the product.

11. Do not overload wall outlets and extension cords as this can result in the risk of ﬁre

or electric shock.

12. Avoid using telephone (other than a cordless type) during an electrical storm.There

may be a remote risk of electrical shock from lightening.

13. Do not use the telephone to report a gas leak in the vicinity of the leak.

Installation & Operation

Component List

Your expandable handset system consists of an A50E HANDSET, CHARGER UNIT,

BELT CLIP, 3 AAA NiMH RECHARGEABLE BATTERIES, AC ADAPTER AND OWNER’S

MANUAL.

Setup Of The A50E Expandable Handset

1. No phone jack required.

2. Choose a location for the charger near an electrical outlet.

3. Plug the AC adapter into an electrical outlet and charger unit.

4. Install the 3 AAA NiMH batteries provided, as described below.

Installation Of Batteries In Handset

(Diagram #1) – Installing the batteries

1. Remove battery compartment cover by sliding it downwards.

2. Install new batteries. Be sure to observe battery polarity as imprinted on the base of

the compartment (See diagram #1).

3. Replace the battery compartment cover by sliding upward until it clicks into place.

IMPORTANT! OnlyuseAAANiMHrechargeablebatteries.DO NOTUSEREGULAR

ALKALINE OR CARBON BATTERIES!

Handset Battery Charging

Handset batteries MUST be connected before beginning initial charging!

1. Place the handset into the charger. The charge indicator LED on the charger will

light RED.

2. IMPORTANT:Thebatteries in the handset must be fully charged for 24 hours before

using the telephone for the ﬁrst time.

3. After the batteries are fully charged, check for dial tone by pressing the button

on the handset.

Fully charged batteries provide an average talk time of about 4 hours, or standby time of

about 8 days. Talk time & standby time may vary depending on operating conditions.

Low Battery Indicators

When the handset batteries get low during a call, there will be a warning tone and the

low battery icon will appear on the Caller ID display. Simply place A50E handset into the

charger to begin recharging. Make sure the contact points are touching and the charge

indicator LED is lit RED.

The battery level can also be monitored via the battery charge icon. This icon appears

while the phone is in standby mode and indicates the condition of the batteries.

Belt Clip Installation

You may choose to use the optional belt clip provided with your handset (See diagram #2

below).

(Diagram #2) – Install and remove the belt clip

1. To attach, slide the belt clip down onto the grooves. Press the tabs on the belt clip

into the slots to attach.

2. To remove, lift one side of the belt clip with your thumbnail and push back.

Addendum

A50 HANDSET REGISTRATION

1 Begin with handsets fully charged for 24 hours. Remove

all handsets from the charging bases, bringing all of them to the

main base and setting them on the counter right next to the

main charging base. (The handsets cannot be registered while

they are in the charging base). Get ready for this 2-handed

process.

2 Put your one finger on the PAGE button on the main

base. Very important - - You must hold this button down

during the whole registration process for all involved handsets

without lifting it off. If the button is released, you must start

over.

3 At the same time - - with your other hand, press and hold

the "CH" button on the 1st handset until you hear 2 quick

confirmation beeps.

4 Immediately move your hand to the next handset – without

lifting the PAGE button, press and hold the "CH" button on the

2nd handset until you hear 2 quick confirmation beeps.

(Repeat for 3rd handset if applicable – without lifting the PAGE

button).

5 Release your hand from the PAGE button now on the main

charging base.

6 Handset 1 should now show "HS-1" on the display.

Handset 2 should now show "HS-2" on the display. (If you have

a 3rd Handset, it will now show “HS-3”).

7 You should now have a dial tone on all the handsets.

NOTE:

If any handset loses registration, then this process must be

repeated for all handsets in order to bring all handsets back into

registration.

Handset Registration With Your ClearSounds A50

The following steps are for registration of additional handsets (model A50E):

1. Make sure the ClearSoundsA50 base unit is connected into theAC outlet and phone

jack. Your ClearSounds A50 handset will show HS-1 (Handset 1) on the LCD.

2. Press and hold the /PAGE button on the base unit. After 3 seconds, press the

“CH” button on the handset until you get a beep and the display will read HS-2.

3. If you have more than two handsets, press the “CH” button on the handset until you

get a beep and the display reads HS-3. Release the /PAGE button from the

base.

NOTE: The /PAGE button on the base unit should be kept pressed during the whole

procedure.

Congratulations! You can now enjoy the beneﬁts of your ClearSounds A50/A50E

Cordless Expandable Ampliﬁed Telephone System.

Headset Operation

YourA50E handset is equipped with a 2.5mm headset jack for use with an optional acces-

sory headset for hands-free operation. If you choose to use the headset option, you must

obtain an optional accessory headset, which is compatible with the handset.

Headsets are available at most retail outlets that sell telephone equipment or contact

ClearSounds Communications at 800-965-9043 or visit www.clearsounds.com.

Maintenance

Taking Care Of Your Telephone

Your cordless telephone contains sophisticated electronic parts, so it must be treated with

care.

Avoid Rough Treatment

Placethehandsetdowngently.Savetheoriginalpackingmaterialtoprotectyourtelephone

if you ever need to ship it.

Avoid Water

Your telephone can be damaged if it gets wet. Do not use the handset outdoors in the

rain, or handle it with wet hands. Do not install your charger near a sink, bathtub, shower

or pool.

IMPORTANT: If your charger unit should fall into water. DO NOT RETRIEVE IT UNTIL

YOU UNPLUG THE POWER CORD. Then pull the unit out by the unplugged cord.

Electrical Storms

Electrical storms can sometimes cause power surges harmful to electronic equipment. For

your safety, use caution when using electrical appliance during storms.

Cleaning Your Telephone

Your telephone has a durable plastic casing that should retain its luster for many years.

Clean it only with a soft cloth slightly dampened with water or mild soap. Do not use excess

water or cleaning solvents of any kind.

For optimum performance, regularly clean the metal charge contact located in the charge

cradle and on the bottom of theA50E handset. Gently rub the contacts with a clean pencil

eraser.

ACCESSORIES

To order a headset call ClearSounds Communications at 800-965-9043 V or 800-814-

5359 TTY.

FCC Registration Notice

THE INFORMATION INFORMING THE USER OF HIS/HER AND THE TELEPHONE

COMPANY’S RIGHT AND OBLIGATION IS OUTLINED BELOW.

a) ThisequipmentcomplieswithPart68oftheFCCrulesandtherequirementsadopted

by theACTA. ON the bottom of this equipment is a label that contains, among other

information, a product identiﬁer in the format US: AAAEQ##TXXXX. If requested,

this number must be provided to the telephone company.

b) All applicable certiﬁcation jacks Universal Service Order Codes (USOC) for the

equipment is provided (i.e. RJ11C) in the package with each piece of approved

terminal equipment.

c) A plug and jack used to connect this equipment to the premises wiring and tele-

phone network must comply with the applicable FCC Part 68 rules and requirement

adopted by theACTA.Acompliant telephone cord and modular plug is provided with

this product. It is designed to be connected to a compatible modular jack that is also

compliant. See installation instructions for details.

d) The REN is used to determine the number of devices that may be connected to the

telephone line. Excessive RENs on a telephone line may result in the devices not

ringing in response to an incoming call. In most but not all areas, the sum of RENs

should not exceed ﬁve (5.00). To be certain of the number of devices that may be

connected to a line, as determined by the total RENs, contact the local telephone

company. [For products approved after July 23, 2001, the REN for this product is

part of the product identiﬁer that has the format US:AAAEQ##TXXXX. The digits

represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3).

For earlier products, the REN is separately shown on the label.]

e) If this equipment causes harm to the telephone network, the telephone company will

notify you in advance that temporary discontinuance of service may be required. But

if advance notice isn’t practical, the telephone company will notify the customer as

soon as possible. Also, you will be advised of your rights to ﬁle a complaint with the

FCC if you believe it is necessary.

f) The telephone company may make changes in its facilities, equipment, operation

or procedures that could affect the operation of the equipment. If this happens the

telephone company will provide advance notice in order for you to make necessary

modiﬁcations to maintain uninterrupted service.

g) Should you experience trouble with the equipment, please contact: ClearSounds

CommunicationsAttn:RepairCenter,8160SMadisonSt-BurrRidge,IL60527,800-

965-9043 V/ 800-814-5359 TTY, 888-654-9219 FAX, e-mail: repairs@clearsounds.

com for repair or warranty information. If the equipment is causing harm to the

telephone network, the telephone company may request that you disconnect the

equipment until the problem is resolved.

h) Please follow instructions for repairing if any (e.g. battery replacement section);

otherwise do not alter or repair any part of device except as speciﬁed.

i) Connection to party line service is subject to state tariffs. Contact the state public

utility commission, public service commission or corporation for information.

j) NOTICE: If your home has specially wired alarm equipment connected to the tele-

phone line, ensure the installation of the ClearSounds A50 does not disable your

alarm equipment. If you have questions about what will disable alarm equipment,

consult your telephone company or a qualiﬁed installer.

k) This equipment is hearing aid compatible.

WARNING: Changes or modiﬁcations to this unit not expressly approved by the

party responsible for compliance could void the user’s authority to operate the

equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These Limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equip-

ment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio com-

munications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television recep-

tion, which can be determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following measures.

· Reorient or relocate the receiving antenna.

· Increase the separation between the equipment and receiver.

· Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

· Consult the dealer or an experienced radio TV technician for help.

This product meets the applicable Industry Canada technical speciﬁcations.

The Ringer Equivalence Number is an indication of the maximum number of terminals

allowed to be connected to a telephone interface. The termination on an interface may

consist of any combination of devices subject only to the requirements that the sum of the

Ringer Equivalence Number of all the devices does not exceed ﬁve.

Should you experience trouble with this equipment, please contact: The Canadian

ServiceCenterisClearSoundsCanada,1861WelchStreet,Suite110,NorthVancouverBC.

V7P1B7.Canada.Tel:800-965-9043Fax:888-654-9219.TheUSServiceCenterisClear-

Sounds Communications - 8160 S Madison St - Burr Ridge, IL 60527-5854 USA Tel No:

800-965-9043 V or 800-814-5359 TTY Fax No: 888-654-9219 e-mail: info@clearsounds.

com Contact Name: Customer Service for repair or warranty information. If the equipment

is causing harm to the telephone network, the telephone company may request that you

disconnect the equipment until the problem is resolved.

Indice

Altri manuali ClearSound Telefono senza fili

ClearSound

ClearSound AMPLIDECT 350 Manuale utente

Manuali Telefono senza fili popolari di altre marche

3Com

3Com NBX Manuale utente

Panasonic

Panasonic KX-TGK210HK Manuale utente

Panasonic

Panasonic KX-TCA181EX Manuale utente

BT FREESTYLE 3200 Manuale utente

AT&T

AT&T CL84102 Manuale utente

BREZZICNI

BREZZICNI CL-3622 Manuale utente

Panasonic

Panasonic KX-TG1831NZ Manuale utente

Panasonic

Panasonic KX-TG7301E Manuale utente

Furuno

Furuno FM-4721 Manuale utente

Sanyo

Sanyo CLT-J70 Manuale utente

Amplicomms

Amplicomms BigTel 201 Manuale utente

GE 26992 Manuale utente

AT&T

AT&T E1812B Manuale utente

Sanyo

Sanyo CLT-670 Manuale utente

GE 15432970 Manuale utente

Curtis

Curtis TC595 Manuale utente

Gigaset

Gigaset Gigaset 3000 Micro Manuale utente

Poly

Poly VVX D230 Guida all'installazione