ClearSounds CL600 Guida alla risoluzione dei problemi

Congratulations on your purchase of the CL600 Emergency

Connect Telephone from ClearSounds Communications™.

Please read this User Manual carefully in order to get the very

best results from your telephone. Keep the manual near the

telephone for easy reference.

Please visit our web site at www.clearsounds.com to:

· Register your product

It’s easy! Click on the Warranty Registration Tab, complete the form and click

“submit”. It’s that simple!

· Download additional manuals and troubleshooting tips

LIMITATION OF LIABILITY

By using this product, the purchaser agrees to the terms and conditions below and to read

and follow all instructions and warnings on the product and contained within the enclosed

manual.

It shall be the sole obligation of the purchaser to assure that CL600 Phone is installed and

programmed properly, and that the unit is used and maintained properly. This includes,

but is not limited to, periodic use to assure that the phone, including batteries, is in proper

working order, that the phone is located within sufﬁcient range of the remote band to

provide reliable operation, and education of the user to assure that he/she is familiar with,

and capable of operating the phone and remote band.

The ClearSounds™maximum liability hereunder is limited to the purchase price of the

product. In no event shall ClearSounds be held liable for any consequential, indirect,

incidental or special damages of any nature arising from the sale or use of the product,

including failure of equipment to perform, whether based in contract, tort, strict liability or

otherwise.

Further, ClearSounds has no obligation to assure that calls are placed, received or re-

sponded to, nor is ClearSounds responsible for the acts, or consequences of the acts, of

those responding.

Conditions for Use

IMPORTANT SAFETY INSTRUCTIONS

Read and understand the Installation Guide & User Manual. When using your telephone

equipment, basic safety precautions should always be followed to reduce the risk of ﬁre,

electric shock and injury to person, including the following.

WARNING: The CL600 Emergency Connect Telephone should be tested regularly to

ensure proper delivery of your pre-recorded emergency message when activated by the

Emergency Button or the Remote Band. This is your responsibility as the user of the

product.

WARNING: Using the CL600 does not guarantee that you will make contact or receive

help. The CL600 is only an aid to assist you in calling for help.

WARNING: Certain structures within the household may block the transmitter signal. It

is up to the user to test the transmitter (Remote Band) within the ﬁrst 30 days of use to

determine if any dead areas exist, and where they are located.

WARNING: Do not place the CL600 on any metal surface. It could reduce reception

range.

WARNING: The CL600 is capable of amplifying sounds to a loud volume. It is important to

instruct all potential users of its proper operation. It is advised to adjust the volume control

to the minimum level (Low) when not in use and alert other users that hearing damage can

potentially result from misuse.

WARNING: To avoid the possibility of electrical shock, do not use this product near water

(For example, near a bathtub, wash basin, kitchen sink or laundry tub, in a wet basement

or near a swimming pool) while in the bathtub or shower or when you are wet. If the phone

becomes submerged in water, do not attempt to retrieve it until after you have unplugged

the line cord from the modular wall jack. Do not plug the phone back in until it has dried

completely.

WARNING: Avoid using the telephone during electrical storms. There may be a remote

risk of electric shock from lightning. If the electrical storm is present in your immediate

area, possibility of electrical shock exists.

WARNING: Do not use the phone if you suspect a gas leak in the area. The phone’s

electrical contacts could create a spark, which could ignite any heavy concentration of

leaking gas.

WARNING: Do not use liquid cleaners or aerosol cleaners on the telephone. Use a damp

cloth for cleaning.

WARNING: The Remote Band is not waterproof or water resistant and may not be sub-

merged in water.

IMPORTANT: Test Your CL600! You should check the operation of your CL600 Phone at

least once per month to assure that it is operating properly.

PLEASE SAVE THESE INSTRUCTIONS

Table of Contents

Product Overview Page 2

Limitation of Liability Page 2

Conditions For Use Page 2

Table of Contents Page 4

Features & Functions

Top View Page 6

Left side, Right side & Back side Views Page 7

Handset & Bottom View Page 8

LCD Screen Page 9

Screen Display Page 9

Installation Steps

Components Page 10

Installing the optional batteries Page 10

Phone mounting – desk & wall use Pages 11-12

Setting the dialing mode Page 12

Programming ringer – volume & style Pages 13-14

Programming memory dial buttons Pages 14-15

CL600 Emergency Connect Phone Operation

Programming 6 Emergency Connect SOS

dialing numbers Page 16

Record an Emergency Connect SOS message Pages 16-17

Play the Emergency Connect SOS message Page 17

Use the Emergency Connect function Page 17

Test the Emergency Connect phone Page 18

Cancel the Emergency Connect SOS call Page 18

Remote Audio Monitoring

Activate the Remote Audio Monitoring Pages 18-19

Setting Access PIN Code Page 19

Using the Remote Audio Monitoring Page 19

Auto On Hook Page 20

CL600 Phone Operation

Making & receiving a call

Using the handset Page 20

Using the speakerphone Pages 20-21

Using audio & telephone accessory jacks Pages 21-22

Using the ampliﬁcation function Page 23

Using the volume reset override Page 24

Using the outgoing speech volume Page 25

Using the last number redial Page 25

Using the ﬂash button Page 25

Using the mute button Page 25

CL600 Caller ID Operation

Viewing your Caller ID display Page 26

Viewing incoming calls Page 27

New calls / message waiting indicator Page 28

Remove call record(s) from Caller ID

A speciﬁc call record Page 28

All call records Pages 28-29

Turn on the Call Waiting Caller ID feature Page 29

CL600 Miscellaneous Feature Setting

Set language Page 30

Set area code / LDS code Page 30

LCD screen contrast Page 31

Date / Hour format Pages 31-32

Adjust number size Page 32

Phone book

Add new number/name Pages 32-33

Review /modify number/name Page 33

Delete number Pages 33-34

Save number from Caller ID Page 34

Dial from the phone book Page 34

Recall/Delete one of the last 30 numbers dialed Pages 34-35

Auto On Hook Page 35

Troubleshooting Guide Pages 35-36

Maintenance and Care Page 37

Change the Emergency Connect Band

Remote Battery Page 37

Speciﬁcations Page 38

FCC Regulatory Compliance Pages 38-39

Warranty and Service Page 40

1. C(delete) button

(up) button

3. (down) button

4. OK (accept) button

5. – Priority memory button

6. – Priority memory button

7. - Priority memory button

8. Antenna

9. AMPLI – Ampliﬁcation &

tone activation button

10. Volume control

11. Tone control

12. M1 – M6 One-Touch

memory dial buttons

13. PROG – Program (save)

button

14. STOP – Cancels emer-

gency connect dial button

15.

– Active emergency

connect dial button

16. SPKR – Speakerphone

button

17. New calls / message wait-

ing indicator

18. – Headset button

19. Flashing incoming call

indicator (strobe light)

20. MUTE button

21. FLASH button

22. REDIAL button

23. In use indicator

24. Speaker

25. Large keypad

26. Hook switch

27. Caller ID Screen

28. Remote Band

29. – Active or Answer

button

30.

– Cancel or End Button

31. LED Stop/battery light

indicator

Figure #2

432152611

171820212223

Features & Functions

Front

Features & Functions

1. Speakerphone volume adjustment

2. Antenna

3. Outgoing speech volume select switch (LO/NORMAL/HI)

4. Ringer Volume select switch (HI/LO/OFF)

5. Ringer / shaker / strobe select mode

6. Phone line jack

7. AC power adapter jack

8. Volume reset override switch (ON/OFF)

9. Optional bed shaker jack

10. Optional Audio/Neckloop jack (3.5mm jack)

11. Optional Telephone jack (2.5mm hands-free)

Figure #3

Left side

Back

Right side

67891011

Figure #4

1. Handset Boost button

2. Memory card to record speed dial numbers

3. Phone keyholes (mounts)

4. Battery compartment

Handset

Bottom

1234

OK button is used to conﬁrm action or a choice on the screen.

“UP / DOWN arrow” buttons are used to highlight or scroll through the menu.

Cbutton is used to cancel or conﬁrm an action/entry or clear a stored Caller ID call.

Your CL600 Phone has a screen with different icons, which help you to use the tele-

phone

The telephone is powered by battery (+battery indicator).

The telephone is powered by AC adapter.

Memory storing is required.

Screen contrast level.

“Mute” is activated.

Speakerphone is activated.

Precede the CID call record number.

To show new records.

Figure #5

Screen example (on hook position)

1. Hours

2. Minutes

3. Power network icon

4. Number of calls

5. Validation button

6. UP / DOWN arrow buttons

7. Cancel / Clear button

8. Month

9. Day

Installation Steps

Installation of your ClearSounds™CL600 Emergency Connect Phone is easy. There are

some basic steps you need to take when you set-up your CL600 Emergency Connect

Phone for the ﬁrst time.

1. Check parts list.

2. Install (4) AAA Alkaline batteries (not included). Batteries are necessary in case of

network power failure to save stored numbers in memory and are required for the

“Phone Book” use.

3. Choose desktop or wall mount.

4. Set the dialing mode.

5. Set ringer and auxiliary alert.

6. Program your memory dial buttons.

COMPONENTS

Check to be sure you have all items that come with your telephone. You should have a

REMOTE BAND, TELEPHONE BASE UNIT, TELEPHONE HANDSET, 6 ft LONG TELE-

PHONE LINE CORD, 8 inch SHORT TELEPHONE LINE CORD, HANDSET COIL CORD,

WALL PLATE ADAPTER, SCREWDRIVER, AC ADAPTER, AND OWNERS MANUAL

INSTALLING THE OPTIONAL BATTERIES

The batteries are necessary in case of network power failure to save stored numbers in

memory and are required for the “Phone Book” use.

1. Open the battery compartment door located on the bottom of your phone by un-

screwing the battery compartment door and removing it from the bottom of your

phone (screwdriver provided).

2. Insert correctly 4 AAA alkaline batteries (purchased separately) in the battery com-

partment (See diagram #6). Be sure to observe battery polarity as imprinted on the

base of the compartment.

3. Replace the battery compartment door and screw back in place.

4. The batteries will last approximately 1 year before needing replacement.

NOTE: Always unplug the line cord before installing new batteries.

DIAGRAM #6- Installing the batteries

Indice

Altri manuali ClearSounds Telefono

ClearSounds

ClearSounds Talk500-ER Manuale utente

ClearSounds

ClearSounds CSC50-ER Guida alla risoluzione dei problemi

ClearSounds

ClearSounds PHONE A1600 Manuale utente

ClearSounds

ClearSounds Talk500-ER Manuale del proprietario

ClearSounds

ClearSounds AMPLIFIED FREEDOM PHONE CSC600D Manuale utente

ClearSounds

ClearSounds CSC500 Manuale utente

ClearSounds

ClearSounds HearingEasy CSC48 Manuale utente

ClearSounds

ClearSounds CSC 600 Guida alla risoluzione dei problemi

ClearSounds

ClearSounds WCSC600 Manuale utente

ClearSounds

ClearSounds TALK500 ER Manuale utente

ClearSounds

ClearSounds Talk500-ER Manuale utente

ClearSounds

ClearSounds TALK500 V508 Manuale utente

ClearSounds

ClearSounds Photo50 V608 Manuale utente

ClearSounds

ClearSounds Geemarc PhotoPHONE 100 Manuale utente

ClearSounds

ClearSounds 40XLC Guida alla risoluzione dei problemi

ClearSounds

ClearSounds A55 Manuale dell'operatore

ClearSounds

ClearSounds v407 Guida alla risoluzione dei problemi

ClearSounds

ClearSounds PHONE A1600 Manuale del proprietario

ClearSounds

ClearSounds Freedom Phone CSC1000 Manuale utente

ClearSounds

ClearSounds TALK500 ER Manuale utente

ClearSounds

ClearSounds CST25 Guida alla risoluzione dei problemi

ClearSounds

ClearSounds CSC500 Manuale utente

ClearSounds

ClearSounds CSC40 Guida alla risoluzione dei problemi

ClearSounds

ClearSounds Freedom Phone CSC1000 Manuale utente

Manuali Telefono popolari di altre marche

GE 2-9480 Manuale utente

Geemarc

Geemarc PHOTOPHONE 155 Manuale utente

D-Link

D-Link DWR-720/PW Manuale utente

Interquartz

Interquartz Gemini IQ333 Manuale utente

SSS Siedle

SSS Siedle HT 840-0 Manuale utente

Motorola

Motorola TITANIUM Manuale utente

Panasonic

Panasonic ICX Manuale utente

LG H870DS Manuale utente

Samsung

Samsung GT-I9500 Manuale utente

AT&T

AT&T Trimline 205 Manuale utente

Selta

Selta zenyth 600 Manuale utente

Doro

Doro AFTI 20 Manuale utente

UNIQCELL

UNIQCELL A1 Manuale utente

Panasonic

Panasonic KX Series Manuale utente

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Manuale utente

BT Decor 425 Manuale utente

NEC

NEC SV8500 Manuale utente

Teledex

Teledex PEARL Manuale utente