ClearSpan 105757 Manuale utente

Visit www.ClearSpan.com for additional products and customer assistance.

WARNING: Identify whether underground cables

and/or pipes are present before installing the frame

kit ground stakes. Do not attempt to install the

frame kit during windy or stormy days.

ATTENTION: The Frame Kits for the 9' and 12'

tall storage bags and shelters include additional

16' straps (with ratchets) to use in place of the 10'

straps included with the anchor kits. The 10' straps

can be used as needed for other applications.

Thank you for purchasing this ClearSpan™ frame kit.

These instructions include helpful hints and important

information needed to safely assemble and attach the

kit. Please read these instructions before you begin.

SAFETY PRECAUTIONS

Wear eye protection.

Wear gloves when handling metal tubes.

Use a portable GFCI when working with power tools

and cords.

•

The following list identifies the main tools needed to assemble and attach the kit components. Additional tools and

supports may be needed depending on the shelter and application.

Wrench, ratchet and socket (recommended)

Hammer and gloves

•

FA2071

Eyebolt

FAMF03B

Fender Washer

FALB02B

Nut

ASSEMBLE THE FRAME KIT

You will need the following parts:

1" Frame Support Pipe (length determined by

shelter)

FA2071 Eyebolts

105575 Star Nuts for 1" Pipe

FAMF03B Fender Washers

FALB02B Nuts

•

Take a 1" diameter plain pipe and install one (1) star nut (#105575) in one end of the pipe. Use a hammer to tap

the star nut into the pipe end. Do not use a tool that can damage the threads in the center of the star nut.

Frame Kit 105757, 105758 and 105759

Installation Instructions

#105575

Visit www.ClearSpan.com for additional products and customer assistance.

ATTACH EYEBOLT ASSEMBLIES

Take one eyebolt assembly and attach it to the

storage bag (or shelter).

Locate the eyebolts, fender washers, and nuts and

assemble each as shown below.

ASSEMBLE THE FRAME KIT (CONTINUED)

FA2071

Eyebolt

FAMF03B

Fender Washer

FALB02B Nut

NOTE: The remaining nuts and washers are used

when the eyebolt assemblies are attached to the

storage bag (or shelter).

Set the pipes and eyebolt assemblies in an

accessible place and continue by placing the storage

bag (or shelter) in the desired location.

Continue by attaching the eyebolt assemblies and

frame support pipes to the storage bag (or shelter).

Corner of

shelter

Eyebolt

Fender

Washer

Nut

Fender

Washer

Diagram may show

shelter of a similar

design

Nut

Repeat Step 1 and attach all remaining eyebolt

assemblies to the storage bag (or shelter).

Visit www.ClearSpan.com for additional products and customer assistance.

Take one 1" plain pipe and twist it onto one of the attached eyebolts.3.

ATTACH EYEBOLT ASSEMBLIES (CONTINUED)

Photo may show a slightly different

application.

Pipe with

installed

star nut.

NOTE: Hand-tighten the pipe until it is snug. Secure shelter material tightly between the washers.

Repeat the steps and attach the remaining frame support pipes.

With all supports attached to the storage bag (or shelter), place the frame pipes in position as shown in the

following photos and anchor the pipes in place using the anchor kits.

Consult the anchor kit installation information to properly attach and secure the anchor kit.

ATTENTION: Each Anchor Kit (#103599) contains four (4) individual anchor sets. Depending on the length of

your shelter, you may have anchor sets (ground stakes and ratchet/straps) that are not used.

Place the lower part of each frame support

on the storage bag to keep the bag in

position.

Dashed lines show the positions of the end

frame support pipes.

Assembled Frame Support Pipe

Visit www.ClearSpan.com for additional products and customer assistance.

Anchor Kit 103599

Installation Instructions

This anchor kit is not designed for larger shelters or for use in sand or on hard surfaces such as asphalt or

concrete. Installing ground stakes at each frame support is required for proper support of the shelter.

ATTENTION: Use the 16' straps (with ratchets) for the 9' and 12' tall storage bags/shelters.

STEP 1: Remove the protective plastic sleeve.

STEP 2: At each frame support pipe, measure at least

three feet (3') in the desired direction and twist a

ground stake into the ground.

STEP 3: Twist stake clockwise until triangular top

touches the ground.

STEP 4: Hook the attached S-Hook in the eye of the

eyebolt assembly.

STEP 5: Insert the loose end of long strap into the

ratchet and tighten to keep strap in place.

STEP 6: Hook the remaining S-Hook through the

triangular top of the ground stake and tighten the

ratchet.

NOTE: If the strap

buildup is too great

in the ratchet, loosen

the ratchet, remove

excess strap, and

retighten the ratchet.

DO NOT remove too

much strap.

STEP 7: Repeat the steps as needed to secure each

frame support pipe to a ground stake.

ATTENTION: DO NOT OVERTIGHTEN RATCHETS.

Diagram shows how

to position straps and

ground stakes at each

corner for proper

support.

Storage Bag

Top View

Dashed lines represent ground anchor straps.

Visit www.ClearSpan.com for additional products and customer assistance.

Space below is reserved for customer notes.

Questo manuale è adatto per i seguenti modelli

Altri manuali ClearSpan Tenda

ClearSpan

ClearSpan 107770 Manuale utente

ClearSpan

ClearSpan PB00260R4 Manuale utente

ClearSpan

ClearSpan PB01900R4 Manuale utente

ClearSpan

ClearSpan R030A00008 Manuale utente

ClearSpan

ClearSpan PB03020R4 Manuale utente

ClearSpan

ClearSpan Value Line 106178 Manuale utente

ClearSpan

ClearSpan 107771 Manuale utente

ClearSpan

ClearSpan 108299F Manuale utente

ClearSpan

ClearSpan 106786 Manuale utente

ClearSpan

ClearSpan PB00650R4 Manuale utente

ClearSpan

ClearSpan 2420CC Manuale utente

ClearSpan

ClearSpan 115408 Manuale utente

ClearSpan

ClearSpan PB00820R3 Manuale utente

ClearSpan

ClearSpan PB03000R5 Manuale utente

ClearSpan

ClearSpan 106777 Manuale utente

ClearSpan

ClearSpan Moo-Tel Economy Series Manuale utente

ClearSpan

ClearSpan PB02906R4 Manuale utente

ClearSpan

ClearSpan 105624 Manuale utente

ClearSpan

ClearSpan 105589 Manuale utente

ClearSpan

ClearSpan 104450 Manuale utente

ClearSpan

ClearSpan 105706 Manuale utente

ClearSpan

ClearSpan PB02900R4 Manuale utente

ClearSpan

ClearSpan SunBurst Manuale utente

ClearSpan

ClearSpan 105115 Manuale utente

Manuali Tenda popolari di altre marche

OZTENT

OZTENT JV SIGNATURE EDITION Manuale utente

GigaTent

GigaTent Summer Chalet Mini Tent Manuale utente

Coleman

Coleman 2000007827 Manuale

ShelterLogic

ShelterLogic 107153 Manuale utente

Outsunny

Outsunny 84C-230 Manuale utente

Napier

Napier SPORTZ COVE 61 Series Manuale utente

EuroTrail

EuroTrail ATLANTIS PRO Manuale utente

Reimo

Reimo Marina Manuale utente

TiiTENT

TiiTENT TB300 Manuale utente

Coleman

Coleman 2000033134 Guida all'installazione

Ozark Trail

Ozark Trail W784.1 Guida rapida

SlingFin

SlingFin CrossBow 2 Manuale utente

Coleman

Coleman 9600-141 Manuale utente

Palram

Palram Arizona 5000 Wave - WINGS Manuale utente

COVERPRO

COVERPRO 56184 Istruzioni per il montaggio

Vango

Vango Zenith 100 Manuale utente

Costway

Costway PATIOJOY OP70818 Manuale utente

Clarke

Clarke PUC 88 Manuale utente