Click CLKTS02 Manuale utente

CLKTS02

24/7 DIGITALTIMER

OPERATING IN TRUCTIONS

Introduction

The CLKTS02 Electronic Timer is a plug-in time switch suitable

for continuous indoor use to switch ON and OFFhousehold

appliances. The timer also incorporates a NiMH rechargeable

battery. If a power failure occurs or the unit is removed from the

mains outlet, the battery will power the unit, avoiding the loss of

any preset programs.

NOTE: The rechargeable battery isa non-replaceable type.

The battery will not provide power to any appliance during

a power failure.

Safety Information

DO NOT IMMERSE TIMER IN WATER OR ANY OTHER LIQUID.

DO NOT use the device if any signs of damage to the device

are observed.

DO NOT plug in an appliance where the load exceeds 10A.

DO NOT use solvents or detergent to clean the timer.

ALWAYS remove timer from mains socket outlet and clean with a

damp rag if cleaning is needed.

ALWAYSensure the plug of any appliance is fully inserted

into the timer outlet.

Heaters and similar appliances should never be left unattended

during operation. The manufacturer recommends such

appliances not be connected to timers.

READ INSTRUCTIONS CAREFULLY BEFORE INITIAL USE.

Keep in a convenient place for future reference.

This product is for indoor use only.

Initial Set-Up

1) Plug the timer into a mains outlet. All segments of the display

should flash on momentarily if the screen was blank prior to

power up.

NOTE: If screen remains blank after connection to mains

supply, leave the unit for approx. 14 hours to fully charge the

battery before operation.

2) Clear all current information b pressing MASTER CLEARbutton

using a paperclip or pen. The display segments should all illuminate

and the unit will reset to Monday at 0:00 in 24-hour format.

3) The timer is now ready to be set up for use.

Setting Current Time

1. Press UP or DOWN button to select clock mode. While in clock

mode, "CLOCK" appears on the bottom left of the LCD.

·2. Press SETand CD buttons simultaneously to toggle between

12-hour and 24-hour format.

3. Pressand Hold SET button to enter set mode. While in set

mode, "SET"appears and flashes on the bottom left corner of

the LCD and the day starts to flash.

4. Press UP and DOWN buttons tb change and press SET button

to continue selecting hour and minute, successively.

5. PressSET button again to exit set mode. If no button is pressed

after

1 minute, it will exit from set mode automatically.

6. Repeat step 1 to 5 until current time is correctly set.

Example: Set current time at 4:10 pm on Wednesday.

1. Reset by pressing MASTER CLEAR, clock is reset to time

0:00:00 on MONDAY in 24-hour format. Alternatively, Press UP

or DOWN button to select clock mode.

2. PressSETand CD buttons simultaneously to change to 12-hour

format.

3. Pressand Hold SET button to enter set mode.

4. Press UP and DOWN buttons to change day to WE, i.e.

Wednesday.

5. Press SET button to select hour.

6. Press UP and DOWN buttons to change hour to 4 PM.

7. PressSET button to select minute.

8. Press UP and DOWN buttons to change minute to 10.

9. PressSET button again to exit set mode.

Setting Timer Programs

1. Press UP or DOWN button to select program mode. While in

-program mode, "PROGRAM" appears at the bottom centre of

the LCD.

2. PressUP or DOWN button to select desired program number and

action, i.e., number 1-10, ON or OFF,that are shown on the left

of the LCD.

3. PressSET to enter set mode. While in set mode, "SET"appears

and flashes on the bottom left corner of the LCDand the day

starts to flash.

4. Press UP and DOWN buttons to change and press SET button

to continue selecting day, hour and minute. (Refer the TIP 1

below for selectable combination of days)

5. PressSET button again to exit set mode. If no button is pressed

after 1 minute, it will exit from set mode automatically.

6. PressSET and CD buttons simultaneously to toggle between

12-hour and 24-hour format.

7. Check "AUTO" is shown on the bottom right of the LCD. If not,

press MANUAL button while in clock mode until "AUTO" is

shown. (Refer to Manual Operation Section for more details.)

8. Repeat step 1 to 7 until current time is correctly set.

TIP1

16SELECTABLEDAYOR COMBINATION OF DAYSAREAS

FOLLOWED

INDIVIDUAL DAY LCDdisplaysone of "MO,TU,WE,TH, FR,SA,SU'

ALLDAYS LCDdisplays"MO TU WETH FRSASU"

WEEKDAYS LCDdisplays "MOTU WETH FR"

WEEKEND LCDdisplays"SASU"

ALL DAYSEXCEPT LCDdisplays"MO TU WETH FRSA"

FORSUNDAY

DAYSGROUPING 1 LCDdisplays"MO WEFR"

DAYSGROUPING 2 LCDdisplays "TUTH SA"

DAYSGROUPING 3 LCDdisplays "MOTU WE"

DAYSGROUPING 4 LCDdisplays"TH FRSA"

DAYSGROUPING 5 LCDdisplays"MO WEFRSU"

TIP 2:The timer ON or OFFwill be executed according to preset time

not to program number. When setting timer programs, ensure the

settings do not overlap. If there are program settings overlapping,

program OFFalways hasthe priority over program ON. In order to

activate the preset timer programs, the timer must be working in

AUTO mode. 3

Example: Set Timer Program 2: ON at 18:15

and OFF at 22:15 everyday.

10.

11.

12.

PressUPor DOWN button to selecttimer program and action until

2_ON isshown on the LCD. )

PressSETto enter set mode. While in set mode, "SET"appearsand

flasheson the bottom left corner of the LCDand the day starts to

flash.

PressUPand DOWN buttons to change day until all daysare

shown on the LCD.

PressSETbutton to select hour.

PressUPand DOWN buttons to change hour to 18.

PressSETbutton to select minute.

PressUPand DOWN buttons to dhange minute to 15.

PressSETbutton again to exit set mode.

PressSETand CD buttons simuldneously to toggle between 12-

hour and 24-hour format.

PressUPor DOWN button to select timer program and action until

2 OFFisshown on the LCD.

Repeatstep 2-9 until LCDdisplaJ 22:15,or 10:15PM

Check "AUTO"is shown on the bottom right of the LCD.If not,

pressMANUALbutton while in clock mode until "AUTO"isshown.

Override Function

Timer program(s) can be overridden individually.

PressUPand DOWN button the relevant timer program number and

action aredisplayed. PressMANUALbutton to override the timer

program, the time isthen replaced by short lines.

Repeatif there are multiple timer program(s)and action(s) to be

override.

To re-enable the overridden timer program, pressMANUALbutton

whilst relevant timer program and action isdisplayed.The pre-set timer

program will revert back on the LCDandthe timer program isactivated

again. Repeatif there are multiple timer program(s) to be re-enabled.

Set Timer Countdowr,

The digital timer incorporates acountdown function. It allows userto

quickly turn ON or OFFthe connected appliance for acertain period

of time.

1. PressUPor DOWN button until countdown program isshown on

the LCD.While in countdown program, "CD"appearson the bottom

centre of the LCD.

2. Pressand Hold SETbutton to enter setmode. While in set mode,

"SET"appearsand flasheson the bottom left corner of the LCD.

3. PressUPand DOWN buttons to selectthe intended action, i.e.,ON

or OFF,during the countdown period.

4. PressSETbutton to select hour, minute, and second; pressUPand

DOWN buttons to change.

5. PressSETbutton again to exit setmode. If no button is pressedafter

1minute, it will exit from set mode automatically.

6. PressUPor DOWN buttons to enter clock mode; pressCD button

to activate countdown function. While activated, "CD"appearsand

flasheson the bottom centre of the LCD.PressCDbutton anytime

to stop CDfunction.

NOTE:Thetimer mustbesetto AUTOmodeto usethisfunction.

Thecountdown function can onlybeactivatedor de-activated

while inclockmode.

Manual Operation

The digital timer can be controlled manually if desired. To switch

ON, press MANUAL button while in clock mode until "ON" is

shown on the bottom right of the LCD.To switch OFF,press

MANUAL button while in clock mode until "OFF" is shown on

the bottom right of the LCD. If the timer is set to ON and then

switched to AUTO by pressing MANUAL button, it will remain

switched on until the next programmed OFF time occurs. If

no OFF time is set, then the timer will remain switched on.

If the timer is set to OFF and then switched to AUTO by

pressing MANUAL

button, it will remain switched off until the next programmed

ON time

occurs. If no ON time is set, then the timer will remain

switched OFF.

NOTE: Neither "ON" nor "OFF" should be shown on the LCD

if automatically controlling by timer programs is intended.

Press MANUAL button while in clock mode until "AUTO" is

shown on the bottom right of the LCD.

Random Function

The digital timer incorporates a random function. When acti-

vated, the timer will switch on randomly for 10 to 31 minutes

from 6:00pm to 6:00am. To activate, press RANDOM button in

clock mode. The symbol R will appear on the LCD indicating

the random function being activated. Ensure the timer is set to

AUTO. Pressthe RANDOM button again to deactivate. RANDOM

function will overwrite all other settings at 6:00pm-6:00am.

Daylight Saving Function

The Digital Timer incorporates a daylight-saving function. Press

SETand MANUAL buttons simultaneously, the current time is

set one hour ahead and the symbol S also appears on the right

of the LCD, indicating the daylight-saving function being acti-

vated. Press SETand MANUAL buttons again to deactivate.

Technical Specifications

VoltaQe 240Vac, SOHz

Max. Load 10A Max. 2400W

OoeratinQ Temoerature . -10 to +40°C

Backup Battery NiMH 1.2V, >100h

(non-replaceable type) (when fully charged) *

Time Minimum Setting Interval 1Min

Time Accuracy +1 Min/Month

• This time may also be affected by the battery life.

WARRANTY

Arleeguaranteesthisproductin accordancewiththe

AustralianConsumer

LawandallotherapplicableAustralian

andNewZealandlawsthatareunabletobeexcluded.

Arleealsowarrantstotheoriginalfirstpurchaserofthis

product ("you") fromaretailerwithwhichthisdocumentis

giventhatthisproductwillbefreeofdefectsinmaterials

andworkmanshipforaperiodof12monthsfromthedate

ofpurchase;providedtheproductisnotusedotherthan

forthepurpose,orinamannernotwithinthescopeofthe

recommendationsandlimitations,specifiedbyArlee,is

newandnotdamagedatthetimeofpurchase,hasbeen

maintainedin accordamewiththe recommendations

specifiedbyArlee,hasnotbeensubjectedto abuse,

misuse,neglectordamage,hasnotbeenmodifiedor

repairedwithouttheapprovalofArleeandhasnotbeen

usedforcommercialpurposes {"Warranty").

IfyouwishtoclaimontheWarranty,youmust,atyour

ownexpense,returntheproduct,andprovideproofof

originalpurchaseandyourname,addressandtelephone

number,toArleeattheaddressbelowortheretailerfrom

whomyouoriginallypurchasedtheproductwithin11

monthsfromthedateofpurchase.

Arleewill(orauthorisetheretailerto)assessanyclaimyou

maymakeontheWarrantyintheabovemannerand

if,in

Arlee'sreasonableopinion,theWarrantyapplies,Arlecwill

atitsownoptionandexpense(orauthorisetheretailerto)

replacetheproductwiththesameorsimilarproductor

repairtheproductandreturnittoyouorrefundtheprice

youpaidfortheproduct.Arleewillbearitsownexpenses

of doingthosethings,andyoumustbearanyother

expensesofclaimingontheWarranty.

ForgoodspurchasedinAustralia(only):

TheWarrantyisinadditiontootherrightsandremedies

youmayhaveunderalawin relationtotheproductto

whichtheWarrantyrelates

Ourgoodscomewithguaranteesthatcannotbeexcluded

undertheAustralianConsumerLaw.Youareentitled

toareplacementorrefundfora majorfailureandfor

compensationfor anyotherreasonablyforeseeable

lossordamage.Youarealsoentitledtohavethegoods

repairedorreplacedifthegoodsfailtobeofacceptable

qualityandthefailuredoesnotamounttoamajorfailure.

ForgoodspurchasedinNewZealand(only):

TheWarrantyisinadditionto,anddoesnotaffect,other

rightsandremediesyoumayhaveunderalawinrelation

totheproducttowhichtheWarrantyrelates.

Ourgoodscomewithguaranteesthatcanonlybe

excludedundertheNewZealandConsumerGuarantees

Act1993totheextentyouareacquiringtheproductfora

businesspurposeanditwouldbefairandreasonablefor

Arleetocontractoutofthoseguarantees.

ArleeAustraliaPty.Ltd.ACN009311105("Arlec")givestheWarranty.

CustomerService:1800826859

NewZealandTollFree:0800003329

CaribbeanPark,36LakeviewDrive,Scoresby,Victoria3179

PostOfficeBox1596,Rowville,Victoria3178

Email:[email protected]

Manuali Timer popolari di altre marche

Intermatic

Intermatic P1131 Manuale utente

Learning Resources

Learning Resources Time Tracker mini Manuale utente

CEBEK

CEBEK I-215 Manuale utente

Somogyi

Somogyi home TS MD 5 Manuale utente

Profile

Profile 010200280 Manuale utente

Gizmo

Gizmo T4 Manuale utente

Tekmar

Tekmar Timer 031 Manuale utente

Daikin

Daikin DST301B61 Manuale utente

sisel

sisel ENDA ETM2432 Manuale utente

B&Q

B&Q TE103 Manuale operativo e di manutenzione

Hozelock

Hozelock AC Plus 2700 Manuale utente

GIC

GIC Eliro V7DDSS3Eliro V7DFTS3 Manuale utente

Tork

Tork TU40 Manuale utente

Emos

Emos EMT400F Manuale utente

FarmTek

FarmTek Polaris Manuale utente

Maximum

Maximum CRONUS Manuale utente

Uberhaus

Uberhaus TD133B Manuale utente

Clas Ohlson

Clas Ohlson 31-3766 Manuale utente