2) Airflow adjustable:
Press “airflow” button on the LCD controller or “airflow” and “airflow” on the remote controller to
increase or decrease it. It can be changed from L-M-H-L-M-H… and that will be showed on the
“airflow indicator”.
3) Mode
Press “COOL” button on the LCD controller, the mode will be changed by COOL VENTILATION COOL.
When the cooler is operating, switch to COOLmode, it will be forced to run for 30s in lowest speed
and then comeback to speed last, it will not affect the speed displays on the remote LED screen.
4)SWING
The “show swing” button will be lighted on when pressing the “swing” button on the LCD controller
or remote controller during operation; it controls the switch of swing function.
5)ANION
The “Show anion” button will be lighted on when pressing “anion” button on the LCD controller or
remote controller during operation, it controls the start and stop function of the anion.
6)TIMER
“Timer” set to start or stop the air cooler automatically after N hous later. It is set by the hour. It will
start the air cooler automatically when it is running during the time is arrived.
“H x” (“x” means the time you set) will be showed on the temperature indicator during the time is
setting, and the temperature will be showed again on it after the timer takes effective. The “TIMER”
will be flicking when pressing the button and you can change the time by pressing the “AIRFLOW’, 9
hours is, maximum.
The timer will be working automatically after 5 seconds when you finish setting and the “TIMER” will
be lasting lighted on.
How to cancel the time set
a. Set the time 00
b. Press the “ON/OFF” button when the “TIMER” flickering during setting
c. Press the “ON/OFF” button after the timer fakes effective
