Climax TSP-3 Manuale utente
TSP-3
Touchscreen Keypad
User Manual
June, 2020
Table of Contents
INTRODUCTION _____________________________________________________________________- 1 -
1. SYSTEM OVERVIEW_______________________________________________________________ 2
1.1. PARTS IDENTIFICATION ___________________________________________________________ 2
1.2. POWER SUPPLY ________________________________________________________________ 3
2. GETTING STARTED _______________________________________________________________ 3
2.1. EQUIPMENT REQUIRED____________________________________________________________ 3
2.2. SETUP _______________________________________________________________________ 3
2.3. HARDWARE INSTALLATION_________________________________________________________ 6
2.4. LOW BATTERY NOTIFICATION ______________________________________________________ 9
3. OPERATION_____________________________________________________________________ 10
3.1. HOME _______________________________________________________________________ 10
3.2. SECURITY ____________________________________________________________________ 13
3.3. HOME AUTOMATION DEVICES _____________________________________________________ 18
3.4. EVENTS______________________________________________________________________ 21
3.5. SETTINGS ____________________________________________________________________ 22
2
Introduction
The Touchscreen Keypad provides easy-to-use, on-premises security system control for
enhanced flexibility and convenience.
When connected to the system Control Panel via Wi-Fi network, the Touchscreen Keypad
enables quick access to the Control Panel, allowing users to easily arm, disarm, or home arm
their security system and control home devices.
1.System Overview
1.1. Parts Identification
1. Camera
Slide up or down the switch to reveal or hide the camera.
2. Power Button
3. Micro USB Port
4. Micro SD Card Slot
5. Earphone Jack
6. Cable Managing Space
7. Notch
8. Desktop Deployment Bracket
9. Wall Mounting Bracket
1.2. Power Supply
The Touchscreen Keypad is powered by rechargeable battery. To
charge the battery, press the latch to open the compartment and
plug in a 5V/1.5A adapter to the Micro USB port of the device and
connect the other end to mains power.
3
2. Getting Started
2.1. Equipment required
The following equipment is required to use your Touchscreen Keypad:
Arouter supporting 2.4 GHz Wi-Fi network. The hub should be connected to this router with
access to internet.
2.2. Setup
To set up your Touchscreen Keypad for accessing hub:
Step 1. Power on the Touchscreen Keypad.
Step 2. Select the WiFi SSID of the router that hub is connected to. Enter the WiFi network
password if required, and click “OK”.
4
Step 3. Put your Hub into learning mode (refer to Hub’s user manual for details). Please note
that Learning process is only required for first time setup.
Step 4. Your Touchscreen Keypad will automatically search for available hubs. Select the hub
you’d like to access to.
<NOTE>
The Touchscreen Keypad is compatible with Climax Video Door Phone and IP
Camera. Up to 6 IP Cameras and VDPs are supported. Ensure to update
device and panel firmware to the latest version for compatibility.
Ensure your Control Panel, VDP, and Touchscreen Keypad are in the
same Local Area Network (LAN). Moreover, both of the VDP and
Touchscreen Keypad should be added into the same Control Panel, or the
devices will not be identified.
Step 5. You will enter the dashboard that displays the current date and time. Now you can
access and control your Hub and smart devices directly on your Touchscreen Keypad.
5
2.3. Hardware Installation
2.3.1 Installation Instructions
There are two mounting options available for installing the Touchscreen Keypad. Users can
choose to install their device anywhere in their home or office to suit their needs. Moreover, a
wall mounting bracket is also provided to enhance installation flexibility for uses to install the
Touchscreen Keypad at a particular place.
Desktop Deployment
A desktop deployment bracket is provided for users to place their Touchscreen Keypad at a
desired place. Please follow steps below:
Step 1. Attach the desktop deployment bracket to the rear side of the Touchscreen .Keypad .in
the direction of the arrows as shown below until you hear a “click” .sound. If you .wish to
remove the bracket, simply press the notches at both sides .and gently lift upward.
6
Step 2. Place the Touchscreen Keypad at desired location.
Wall Mounting
A wall mounting bracket is also included for users to place their Touchscreen Keypad at a fixed
place when not in use. Please follow steps below:
Step 1. Use the three mounting holes on the bracket as template to drill holes.
Step 2. Insert the wall plugs if fixing into plaster or brick.
Step 3. Screw the bracket into the wall with the 3 screws provided.
Step 4. Attach the Touchscreen Keypad onto the bracket.
7
Step 5. Hold the Touchscreen Keypad and gently push downwards until you hear a “click”
sound.
8
2.4. Low Battery Notification
When battery is running low, a low battery notification will be displayed to inform you to recharge
the battery. Please refer to Power Supply to recharge the Touchscreen Keypad.
9
3.Operation
3.1. Home
Date & Time: The Home page displays current Date & Time.
Home Widget : The Home Widget list is for you to control or check currents status of
the HVAC sensors or devices which have been learned into the system.
To set the list:
Step 1. Tap the Home Widget icon. Check the devices that you are going to display on the
list. Up to six devices can be displayed here.
Indice
Altri manuali Climax Tastiera
