Closet Maid ShelfTrack Istruzioni per il montaggio
© 2018 ClosetMaid LLC. All Rights Reserved. | Ocala, FL 34471 | 1-800-874-0008 | www.closetmaid.com
ShelfTrack ®
Installation Tips
/18
Tools you will need for assembly:
.50 in.
.25 in.
2
PARTS
© 2018 ClosetMaid LLC. All Rights Reserved. | Ocala, FL 34471 | 1-800-874-0008 | www.closetmaid.com
3/16 in. Toggle / 3 in. Bolt #12 x 2 in. Panhead Screw 1/4 in. Anchor
Shelf Caps Closet Rod Cap Shoe Shelf Support and Inserts
Closet Rod Support Shelf Bracket Hang Track
Standard
Closet Rod
3
1Prepare for hang track installation
A) CUT TRACK IF NECESSARY
Remember to always cut between the holes.
B) DETERMINE WALL TYPE
Determine whether you will be mounting the hang track (and standards) into drywall or
concrete. (Note: Drywall installation requires mounting to at least one stud.)
The installation is in a later step, but it is important to understand which method you will
use.
C) DETERMINE PROPER HARDWARE FOR WALL TYPE
Locate and identify proper hardware for your wall type.
© 2018 ClosetMaid LLC. All Rights Reserved. | Ocala, FL 34471 | 1-800-874-0008 | www.closetmaid.com
THROUGH DRYWALL
INTO STUD
DRYWALL
USE ANCHOR/SCREW FOR ALL HOLES
CONCRETE
4
2
© 2018 ClosetMaid LLC. All Rights Reserved. | Ocala, FL 34471 | 1-800-874-0008 | www.closetmaid.com
Mark the Hang Track Location on closet wall
A) DETERMINE “TOP” AND “BOTTOM”
OF HANG TRACKS
B) DRAW A LEVEL LINE 7 ft. UP FROM
THE FLOOR
Place BOTTOM edge of hang track ON MARKED
LINE and AGAINST EACH SIDE WALL in closet.
Mark all the hole locations on wall.
(NOTE FOR DRYWALL INSTALLATION: Be sure
at leaset one hole aligns with a stud.)
5© 2018 ClosetMaid LLC. All Rights Reserved. | Ocala, FL 34471 | 1-800-874-0008 | www.closetmaid.com
3Attach Hang Track to wall using specic hardware
A) DRYWALL
Drywall installations require at least
one hole to align with a stud (see
diagram).
For holes which go ONLY into
drywall, drill 1/2 in. holes and use
3/16 in. toggle/bolt**.
For hole(s) which align with stud(s),
use #12 x 2 in. panhead screw
directly into stud (do not predrill hole).
B) CONCRETE
For ALL holes, drill a 1/4 in. hole and
insert an anchor.
Thread a screw through track and into
each anchor.
** Insert bolt through hole in hang track and re-install toggle onto end of bolt. Repeat for all
toggles and bolts. Place hang track against wall at the hole locations. Squeeze toggle bolts
and push through drilled holes. Tighten bolts to secure hang track to wall.
6
4
© 2018 ClosetMaid LLC. All Rights Reserved. | Ocala, FL 34471 | 1-800-874-0008 | www.closetmaid.com
A) Space standards NO MORE than 24 in. apart and a MINIMUM of 2 in. in from end of hang
track. Measure from the CENTER of one standard to the CENTER of the next standard.
B) Attach standards as shown in locations marked for
your wall width. Be sure to measure from center
of one standard to center of next standard. Never
place standards more than 24 in. apart, less than
2 in. from end of hang track, or more than 4 in.
from from end of hang track (for standards closest
to side walls).
Secure each standard to wall through second or
third hole location with one supplied screw/anchor.
To do so, drill 1/4 in. holes at hole locations,
insert anchor, and attach standard to wall with 2 in.
screw.
Install standards onto hang track
C)
7
5
© 2018 ClosetMaid LLC. All Rights Reserved. | Ocala, FL 34471 | 1-800-874-0008 | www.closetmaid.com
Install brackets
Insert shelf brackets into standards at desired height for
each shelf.
Each 8 ft. shelf requires 5 shelf brackets.
Each 6 ft. shelf requires 4 shelf brackets.
Each 4 ft. shelf requires 3 shelf brackets.
Each 2 ft. shelf (or cut 1 ft. shelves) require 2 shelf
brackets.
8
6
© 2018 ClosetMaid LLC. All Rights Reserved. | Ocala, FL 34471 | 1-800-874-0008 | www.closetmaid.com
Install shelves
A) Allow a 1 in. - 2 in. overhang (beyond bracket). Never allow more than a 4 in. overhang.
B) FOR SHELVES THAT
REQUIRE CUTTING:
Put shelf on brackets so one side is
ush with wall.
Allow an equal overhang (from
brackets) on both sides. Measure
amount to be cut.
Remove shelf and cut with hacksaw
or bolt cutter.
Do not make cuts where vertical
spacers are on front lip of shelf.
C) Place shelf caps onto exposed shelf
wires.
9© 2018 ClosetMaid LLC. All Rights Reserved. | Ocala, FL 34471 | 1-800-874-0008 | www.closetmaid.com
7
6Install shelves (Cont.)
Install shoe shelf
Rest shelf on each shelf bracket at desired
location.
Pull shelf forward and allow front to “drop”
over nose of shelf brackets (nose of each shelf
bracket will t between wires).
Push shelf backwards so back wire ts into
shelf bracket slots.
Firmly pull shelf forward at each bracket
location to lock shelf into place.
10
7
© 2018 ClosetMaid LLC. All Rights Reserved. | Ocala, FL 34471 | 1-800-874-0008 | www.closetmaid.com
Install shoe shelf
A) Attach insert onto end of shoe shelf support
as shown.
B) Attach shoe shelf supports to
longest standards at bottom
right.
NOTE: For proper installation, turn
shoe shelf upside down so lip faces
up before installing.
• Attach shoe shelf onto shoe shelf
supports by placing back of shelf into
slots at back of shoe shelf
support. Pull shelf forward and lower
front of shelf onto shoe shelf support.
Insert as shown.
Indice
Altri manuali Closet Maid Magazzinaggio
Closet Maid
Closet Maid 3-Cube Storage System 8178 Manuale utente
Closet Maid
Closet Maid SuperSlide 5637 Manuale utente
Closet Maid
Closet Maid 3120 Istruzioni per l'installazione
Closet Maid
Closet Maid 6-Cube Storage System Manuale utente
Closet Maid
Closet Maid 2-Door Versa Cabinet 12075 Manuale utente
Closet Maid
Closet Maid 432600 Manuale utente
