49C1(49AF) CloudWalker 英文说明书（亚洲V56方案 T8大板）（BCA7-42） F1709123
7
Basic Operations
Remark:
1. The following keys operation refers to remote
control operation, for panel control keys
operation please refer to "Panel Control Keys"
operation explanation.
2. The menu operation in this manual uses the
example in TV input source; the operations in
other input source are same as the TV.
Turning on/Standby
Connect the power supply. Press the [ ] button on
the TV(If it this button, you needn't
operate this step), and then press [ ] key to turn on
the TV. (Notice: Please make sure that the power
supply is stable)
In power on state, press [ ] key to switch to
standby mode.
★ Special Tips: This device adopts energy saving
technology. If there is no signal input in power on
state, it will enter standby state automatically in five
minutes; The device will enter standby state
automatically at specified sleep time;
Signal source selection
After turning on the device, press [SOURCE] key to
show the ''Input Source'' menu on the screen; press
[▲]/[▼] key to select a signal source. Press [OK] key
to switch to the selected signal source.
Menu operation description
Press [MENU] key to show the main menu on the
screen:
1. Press [t]/[u] key to select a menu from
CHANNEL, PICTURE, SOUND, OPTION.
2. Press [▲]/[▼] key to select an item in the menu.
3. Press [OK] key to enter the submenu.
4. Press [t]/[u] key to adjust the value or setting.
5. When the main menu shows on the screen,
press [MENU] key to exit the main menu.
6. During menu operation, the icons of invalid
options will change into grey.
Program scanning
Tune the programs before watching the TV for the
first time. Before tuning, please make sure that the
doesn't have
antenna has been connected properly.
Auto Tuning
Select CHANNEL > Auto Tuning, then press [OK]
key to start automatic tuning. The scanned TV
channels will be saved automatically. In the process of
tuning, you can press [MENU] key to exit Auto
Tuning. After auto tuning, the channels will be listed
by the frequency, and the original list will be covered.
ATV Manual Tuning
Select CHANNEL > ATV Manual Tuning, and
press [OK] key to enter the menu. Press [▲]/[▼] key
to select what you want to adjust, then press [t]/[u]
key to adjust, setting or scanning. In the process of
scanning, you can press [MENU] key to exit the
scanning.
USB multimedia function
Please insert USB storage device into USB
interface of TV, and select USB as signal source.
Enter the USB multimedia center, which includes 4
sorts: PHOTO, MUSIC, MOVIE and TEXT.
While playing, press [INFO] key to show the menu
options as in the picture above; press [▼] key to hide
the function bar. Select an icon, and press [OK] key to
perform the operation. Press [ ]/[ ]/[ ]/[ ]/[ ]/
[ ]/[ ] key to perform shortcut operation.
Remark:
1. Compatible USB media files: video, audio,
picture, and text. The nonstandard USB storage
devices may be incompatible; please replace
with standard devices;
2. Stream media system has limitation on every
kind of file format, and will report error if beyond
system limit;3. Do not unplug the USB device
while playing, or else it will cause system or
device error;
4. The system supports USB flash drive and
removable hard disk with standard USB1.1 and
USB2.0 interface transmission protocol. The file
format of USB device must be FAT or FAT32,
instead of NTFS.
5. The USB interface of this TV set can supply a
voltage of 5V and the maximum current is
500mA; accurate identification of the multimedia
player will be affected when a storage device
above 500mA is used, which is a normal
phenomenon.
