Clover WW2000 Manuale utente
Transmitter --- Camera (WW2000)
Component
1.Power Button
2.Focus Adjustor
3.Camera Lens
4.Infrared Emitting Tube
5.Indicator Lamp
6.Crophone
7.Rectangle Antenna
8.Input Jack of Power DC 12V
9.Channel Selector
1) Use the pin of power line with adaptor to insert into the jack ⑧, and plug the power
supply to connect the camera.
2) Press the Button ①to open the power then the indicator lamp ⑤will be bright.
3) Adjust the Channel Selector ⑨to the corresponding channel of monitor.
4) If the monitor is working, it will display the picture which camera was taken.
5) Adjust the Focus Adjustor ②to get the clearest image (when first time do it, then
afterward do not need to re-adjust it).
6) Place the camera in the far site, and synchronously adjust its antenna ⑦and monitorˊs
to get the clearest image.
7) You can also adjust the direction and the up-angle of camera when you need.
Indice
Altri manuali Clover Telecamera di sicurezza
Clover
Clover CCM630P Manuale utente
Clover
Clover CW5700TX Manuale utente
Clover
Clover HDC041 Manuale utente
Clover
Clover HDC042 Manuale utente
Clover
Clover HDC100 Manuale utente
Clover
Clover HDC560 Manuale utente
Clover
Clover ZEC470 Manuale utente
Clover
Clover CM105H Manuale utente
Clover
Clover HDC518 Manuale utente
Clover
Clover CM800 Manuale utente
Clover
Clover HDC500 Manuale utente
Clover
Clover HDC577 Manuale utente
Clover
Clover HDC365 Manuale utente
Clover
Clover HDC238 Manuale utente
Clover
Clover HDC041 Manuale utente
Clover
Clover WW2000 Manuale utente
Clover
Clover HDC150 Manuale utente
Clover
Clover OC295 Manuale utente
Clover
Clover CCM660W Manuale utente
Clover
Clover HDC238 Manuale utente
