CNB MPC1050IR Manuale utente
Rev 1.1
Network Camera
(“M” Series)
User Manual
2
Network Camera_ User manual
Revision History:
Date Rev No Description
Dec. 1th, 2013 1.0 Creation of the Document
Feb. 20th, 2014 1.1 Modified “2.7. Video etup - I P Module Adjust”
Indications:
Warning : Death or erious Injury will occur without following Warning.
Caution : Operational Problem(Faulty & Malfunction) will occur without complying with Caution.
Re erence : Technical Information for Users.
3
Network Camera_ User manual
Contents
1. PREPARATION FOR THE CONNECTION ................................................................................... 4
1.1. Product Installation .............................................................................................................. 4
1.2. PC Requirements .................................................................................................................. 6
2. CONFIGURATION IN ADMIN MODE ......................................................................................... 7
2.1. Access ................................................................................................................................. 7
2.2. Layout of the admin mode .................................................................................................... 9
2.3. Basic etup ........................................................................................................................ 10
2.4. Network etup ................................................................................................................... 12
2.5. 802.1x etup ..................................................................................................................... 14
2.6. Onvif etup ........................................................................................................................ 15
2.7. Video etup ....................................................................................................................... 16
2.8. User Admin & Time etup ................................................................................................... 18
2.9. ensor & Capture etup ..................................................................................................... 20
2.10. E-Mail & FTP etup ............................................................................................................ 22
2.11. Alarm Device etup ............................................................................................................ 23
2.12. Motion Detection etup ...................................................................................................... 24
2.13. Audio Detection ................................................................................................................. 26
2.14. PTZ etup .......................................................................................................................... 27
2.15. Upgrade & Reset ................................................................................................................ 28
2.16. tatus Report ..................................................................................................................... 31
3. WEB VIEWER ......................................................................................................................... 32
3.1. Web Viewer ....................................................................................................................... 32
3.2. Buttons and Indicators of Web Viewer. ................................................................................ 33
3.3. Crop Video etting ............................................................................................................. 34
3.4. PTZ Control Menu .............................................................................................................. 35
4. TROUBLE SHOOTING AND TIPS ............................................................................................ 39
4.1. Trouble shooting after installation ........................................................................................ 39
4.2. Trouble shooting after successful connection to the device.................................................... 40
4
Network Camera_ User manual
1. Preparation for the connection
1.1. Product Installation
Brief information for rapid installation is provided in this section. For more detailed information you are
recommended to refer to pertinent documentations provided with the product.
1. Apply Power to the product and connect the product with network cable.
Applying improper power to device can cause damage to the device.
Varieties of power supplying option are provided for each of the product. Please refer
to the manual of each specific product for available option.
2. Install “IP installer (Ver.3.0.1 or above)” and “NVR-Pro (Ver.5.17 or above)” on your PC.
Each Program is included in the CD coming with product and can be downloaded from
www.cnbtec.com.
Detailed information for installing these programs can be found in [IP-Installer User’s Guide] and
[NVR-Pro User’s Guide], respectively.
3. Assign IP address to the product using IP installer IP Installer.
Identify the type of the network environment and set up IP address. Detailed process of setting up
IP address can be found in [IP-Installer User’s Guide]. If network type is xD L or Cable modem
you need supplementary information provided by your I P.
5
Network Camera_ User manual
< Quick Installation Guide o IP-Installer >
Install the IP Installer on the PC or Laptop. The WinPCap installed together is required software for the
operation of IP-Installer. Please install the WinPCap essentially as when it is not installed, IP Installer won’t
operate.
a. Starting IP-Installer.
Upon initiation of the IP-Installer, the PC will ask for the selection of proper network adaptor. Click on
proper LAN or WIFI network interface module displayed to highlight the selection and click on “OK”
to start the program.
b. Find the product or the con iguration
Click on “Re resh” button to find the list of the products (IP cameras or video servers) connected on
the same subnet as the PC.
]
Fig. 1-1. IP-Installer Product Search
c. Assign network parameters needed or connection to the product. Please ollow through
the ollowing procedures.
i. Double click on a product you want to set up.
ii. Once the parameter Fields as shown Fig 1-2 are activated, set the network parameters.
iii. Once you fill in the fields, click on “Set” to initialize the product with new settings.
6
Network Camera_ User manual
Fig. 1-2. IP-Installer Parameter Setting Up
1.2. PC Requirements
AV streaming data received from IP camera or video server can be decoded or stored in a PC running
NVR-PRO program or other CM program. Minimum requirement of the PC is recommended as in the
following table.
Item Minimum Requirements Misc
CPU Intel Core i3 above
RAM 2GB
Graphic Card ATI Chip et Based, 512M above Resolution : 1920x1080 above
LAN Card 100Mbps above
O Windows XP / Windows 7
7
Network Camera_ User manual
2. Configuration in Admin Mode
The detailed operational parameters of the product can be configured through Admin Mode via network.
2.1. Access
The access to Admin Mode can be done using 2 ways; through Internet Explorer and the “NVR-Pro”
program.
1. Using Internet Explorer
Type in the connection address of the product in the address field of the Internet Explorer as
followings:
http://[IP address of the product]/admin.htm
Example : http://172.16.64.133/admin.htm
If you changed the HTTP port of the product from default value (80) you can access to Admin mode
by adding HTTP port address as the following:
http://[device IP address]:[HTTP port]/admin.htm
Example : http://172.16.64.133:8080/admin.htm
2. Using the “NVR-Pro”
elect video channel in the viewing window of “NVR-Pro”. elected video channel will be highlighted,
then Click button on the right side of the display screen to access to admin mode.
Figure 2-1. Access to admin Mode rom “NVR-Pro”
8
Network Camera_ User manual
3. Input User Name and Password in the display screen shown below.
Factory default “User Name” and “Password” are set as “root” and “admin”, respectively. Click on
“OK” button to enter into the Basic Setup page of Admin mode. If you have changed the username
and password of the Administrator, you must log on with the changed username and password.
For the sake of enhanced security, we strongly recommend you to change ID and Password
during the installation and keep the ID and Password carefully for not opening to others.
The details are described on [User Admin & Time etup] section of this document.
If ID and Password are lost, restore the factory default value by following the procedure
below.
When the power is applied to product, press the Factory Default button for more than 3 sec,
then all etting Parameters will be returned to Factory Default.
9
Network Camera_ User manual
2.2. Layout o the admin mode
Upon initiation of the admin mode, the screen similar to the following picture will be shown.
The left side of the admin page shows various admin Mode menus, while the right side shows the settings
of selected admin menu. Click each of the menu items at the left to go into specific admin mode.
Fig. 2-2. Layout o Admin Mode
elect the language of your preference from drop down list at Top-right.
Click on “Live” button for initiating live video connection after finishing Admin Mode.
The following sections describe details for each admin mode menu.
10
Network Camera_ User manual
2.3. Basic Setup
etup the basic parameters for the operation of the product.
Fig. 2-3. Basic Setup
Item Description
ystem Name
Logical name of the product. It is same as the one set-up by IP-installer.
You can reassign the logical name. The system name will be shown in the
connection through NVR-Pro.
creen Capture in Web
Viewer
Designate the folder to save captured image in Web viewer by clicking
capture button ( ). Default path is Desktop.
Audio Input election
elect the type of input audio.
Line In : used for Line-out from general audio device.
Ext-Mic : used for Microphone
Video
Bandwidth
Control
Max upload
rate
Assign maximum bandwidth of the uplink for the network connected to
device.
Video
rotation Check at the box to rotate the video by 180
o
.
Video Encoding Profile elect video encoding profile.
Indice
Altri manuali CNB Telecamera di sicurezza
CNB
CNB XNET IVC5055VR Manuale utente
CNB
CNB IDC4050IR Manuale utente
CNB
CNB XNET IGP2035F Manuale utente
CNB
CNB CNB-IGC2050F Manuale utente
CNB
CNB XNET IGP1030 Manuale utente
CNB
CNB TPM24R-X44SW Manuale utente
CNB
CNB XPEED Indoor Series Manuale utente
CNB
CNB SxB2xZ12F N Manuale utente
CNB
CNB XPEED SDN-22Z27F Manuale utente
CNB
CNB XNET IGP1030 Manuale utente
CNB
CNB ISS2000 Series Manuale utente
CNB
CNB IDP4030VR Manuale utente
CNB
CNB XNET IBP5030CR Manuale utente
CNB
CNB IXP3035VR Manuale utente
CNB
CNB XNET ITE1030 Manuale utente
CNB
CNB Xpeed s2000 series Manuale utente
CNB
CNB AN200L Manuale per l'uso e la cura
CNB
CNB NB21-7MHR-6 Manuale utente
CNB
CNB XNET NDE5055MF Manuale utente
CNB
CNB IXP3035VR Manuale utente
