CNE WLC311NR Manuale utente
OEM installation Manual
- 1 -
Chung Nam Electronics (CNE)
IEEE 802.11b/g/n USB WLAN Module
(Model #: WLC311NR)
OEM Manual
Version 2.0
December 2008
OEM installation Manual
- 2 -
Contents
Chapter 1: Product Information .....................................................................................3
1.1 Introduction.......................................................................................................3
1.2 Features.............................................................................................................3
1.3 LED Status........................................................................................................3
Chapter 2: Installation Guide.........................................................................................4
2.1 Overview...........................................................................................................4
2.2 Installation procedure........................................................................................4
2.2.1 Software installation ...............................................................................4
2.2.2 Hardware Installation..............................................................................8
2.3 Uninstall Software ............................................................................................8
2.3.1 Uninstall the driver software...................................................................8
2.3.2 Uninstall the utility software from your embedded system....................9
Chapter 3: Connect to Wireless Access Point.......................................................10
3.1 Using Ralink Configuration Utility ................................................................10
3.2 Using Windows Zero Configuration...............................................................16
Chapter 4: Regulatory information..............................................................................18
4.1 FCC Information to User ................................................................................18
4.2 FCC Guidelines for Human Exposure............................................................18
4.3 FCC Electronic Emission Notices ..................................................................18
4.4 OEM Installation Guide..................................................................................18
4.5 Antenna Specification.....................................................................................19
Chapter 5: Technical Specifications ............................................................................20
Appendix A: Specifications..................................................................................20
Appendix B: Glossary...........................................................................................21
OEM installation Manual
- 3 -
Chapter 1: Product Information
1.1 Introduction
CNE WLC311NR is a USB 2.0 pen-size WLAN module supporting IEEE
802.11b/g/n at 2.4GHz radio operation, The WLAN module provides high-speed
wireless connectivity with data rate from 1 Mbps up to 135Mbps theoretically.
Additionally, wireless roaming allows the user to move among different access points
without losing the connection. The WLAN module also provides excellent security
features such as WEP 64/128, WPA, WPA2, TKIP, AES, WPS, PBC, PIN encryption
security which make the network almost impenetrable.
Featuring high performance transmission rates, simple installation and adaptability as
well as strong security, the WLC311NR WLAN module is the perfect solution for
small office and home use.
1.2 Features
Complies with IEEE 802.11b/g, IEEE 802.11n Draft 2.0 standards.
1T1R Modes with 135Mbps PHY Rate for Antenna configurations.
Legacy and High Throughput Modes.
Dynamic data rate: Maximum data rate up to 135Mbps. Auto fallback
switching with 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2 and 1Mbps.
Reverse Direction Grant Data Flow and Frame Aggregation.
QoS-WMM, WMM-PS.
Multiple BSSID Support.
Wireless data encryption with 64/128 encryption for security
Supporting WPS by external push button or software API.
Lower Power with Advanced Power Management.
Drivers supports Windows XP 32/64, 2000, Vista32/64, Linux, Macintosh.
1.3 LED Status
The LEDs in this WLAN module indicate Link/Act status. It blinks at green light
when sending and receiving data.
OEM installation Manual
- 4 -
Chapter 2: Installation Guide
2.1 Overview
The WLC311NR WLAN module will be installed into the embedded system under
various operation systems (OS) such as Windows 2000/XP/Vista/CE or Linux. In
this OEM manual, we will use Window XP as an example to show you how to install
the driver on the OS. The WLC311NR setup Wizard will guide you through the
installation procedure. This Wizard will also guide you installing the Utility and
drivers.
In case you plug in the hardware before installing the software, you will be prompted
by “Found New Hardware Wizard”, please click the Cancel button, and run the Setup
Wizard program from the installation CD-ROM shipped together with the module.
All of following sections are written based on Windows XP.
*
Note:The comments and conditions for other OS platforms may be different from
this chapter.
2.2 Installation procedure
2.2.1 Software installation
Please follow below instructions to install the driver for WLC311NR WLAN module.
1. Insert the Resource CD into the CD/DVD-ROM drive of your computer; then
execute Setup.exe to install the driver. The system will operate automatically,
Figure 2-1 License Agreement
OEM installation Manual
- 5 -
and the License Agreement dialog box as shown in Figure 2-1 will appear on the
screen. Please read all the license agreement thoroughly and select Yes in case
you accept the terms and conditions of the license agreement, then click Next >.
2. The dialog box Setup Type shows as Figure 2-2 will allow you to choose your
wanted driver, you can select the best suit your needs. It is recommended to
choose the Install driver and Ralink WLAN Utility, and click on the button
Next >.
Figure 2-2 Setup Type to choose installed driver
3. The Setup Type dialog box as shown in Figure 2-3 appears on the screen, you
can choose either using Ralink Configuration Tool or Microsoft Zero
Configuration Tool to configure your new IEEE 802.11b/g/n USB WLAN
module. However, it is recommended to select Ralink Configuration Tool to
configure the module as it provides fully access to all functions of the module. If
you prefer to use the wireless configuration tool provided by Windows XP or
Vista, please select Microsoft Zero Configuration Tool. Then click Next to
continue.
OEM installation Manual
- 6 -
Figure 2-3 Select Configuration Tool in the Setup Type
4. You have selected the setup type that best suit your needs, and you are ready to
install the program, please select the button Install in the dialog box Figure 2-4.
Figure 2-4 Ready to install the program
OEM installation Manual
- 7 -
5. Please wait for a moment and the dialog box of Setup Status as Figure 2-5 will
appear on the screen.
Figure 2-5 Setup Status
6. When the computer finish the driver installation. The screen of Figure 2-6 will
then appear. Click the Finish to complete the installation.
Figure 2-6 Install Shield Wizard Complete
7. A new icon
will appear at the lower-right corner of your computer after driver
OEM installation Manual
- 8 -
installation. If you put the mouse cursor on top of the icon, a pop up message box
will indicate to you that the WLAN module does not exist.
8. Please plug in the WLC311NR WLAN module into your embedded system for the
hardware installation.
2.2.2 Hardware Installation
1. Connect one end of the USB cable to the Adapter.
2. Connect the other end of the USB cable to the USB port on your computer.
Because the Adapter gets its power from the host, there is no external power supply.
The LED should light up when the Adapter is plugged in and the embedded system is
on.
2.3 Uninstall Software
2.3.1 Uninstall the driver software
If you want to install a new WLAN USB adapter, you have to uninstall the software
driver. Below are the procedures to uninstall the driver:
To remove any old software or this WLAN USB adapter in Windows XP OS:
1. On the Windows taskbar, click the Start button, select the programmer ->
Ralink Wireless -> Uninstall - RT2870 as Figure 2-8 to uninstall the software.
Figure 2-8 uninstall utility
OEM installation Manual
- 9 -
2. . On the Windows taskbar, click the Start button, point to Settings, and then
click Control Panel.
. Double-click the System icon, click on the Hardware tab in the System
window.
. Click on the Device Manager button, double-click Network Adapters, and
then right-click 802.11 USB Wireless LAN Card.
. Click Uninstall..., shown in above Figure 2-9, the system will uninstall the
driver software of the WLAN module from you embedded system OS.
2.3.2 Uninstall the utility software from your embedded system
1. On the Windows taskbar, click the Start button, point to Settings, and then
click Control Panel
2. Double-click the Add/Remove Programs icon, find the WLC311NR
program from the installed program list, highlight it and click the Remove
button.
3. Following the Install Shield Wizard will uninstall the utility software from
your embedded system.
Figure 2-9 uninstall driver
OEM installation Manual
- 10 -
Chapter 3
: Connect to Wireless Access Point
This section shows you how to configure the WLC311NR WLAN module in order to
getting connection to a wireless access point. There are two kinds of ways that you
can carry out this task:
•
Using Ralink Configuration Utility to connect the wireless access point.
•
Using Windows built-in Windows Zero Configuration Utility to connect
the wireless access point.
3.1 Using Ralink Configuration Utility
Below instructions show you how connect to the wireless access point using Ralink
Configuration Utility:
1. Right-click the Ralink configuration utility icon located at low-right corner of
your embedded system, click Launch Config Utilities, Figure 2-7 will appear.
2. To add a new connection profile, you can either
•
Create a new profile or
•
Modify a profile from an existing wireless access point or wireless device.
Figure3-1 Profile setting
Indice
Altri manuali CNE Adattatore
