CNET CQU-906 Manuale utente
CQU-906
Wireless-N Pico USB Dongle
User Manual
Ver 1.00
2
Table of Contents
Chapter1.Introduction.............................................................................................3
1.1.AboutCQU‐906......................................................................................................3
1.2.MainFeatures........................................................................................................3
1.3.GettingtoKnowCQU‐906......................................................................................3
Chapter2.InstallingtheSoftwareoftheUSBadapter...............................................4
Chapter3.ConfiguringYourWirelessNetwork..........................................................7
Chapter4.Wi‐FiProtectedSetup(WPS)...................................................................13
4.1.Wi‐FiProtectedSetup(WPS)...............................................................................13
4.2.Wi‐FiProtectedSetup(WPS)...............................................................................16
Chapter5.ModeSelection.......................................................................................18
5.1.AccessPointandStationmodeselection............................................................18
5.2.AccessPointMode...............................................................................................19
Chapter6.Otherfunction.........................................................................................20
6.1.RadioOff...............................................................................................................20
6.2.DisableAdapter
....................................................................................................21
Chapter7.UninstallingWirelessUtility....................................................................22
Appendix1.Troubleshooting......................................................................................24
Appendix2.PlanningYourWirelessNetwork.............................................................25
3
Chapter 1. Introduction
1.1. About CQU-906
Thank you for choosing CQU-906 Wireless-N Pico USB Dongle. CQU-906 is a new generation
super mini, low power consumption wireless USB dongle. It provides high security level and
reasonable performance based on IEEE 802.11b/g/n standard.
CQU-906 can be used on PC/Notebook’s USB port to connect to wireless AP. With an integrated
wireless processing chipset, CQU-906 provides a maximum link speed of 150Mbps. Moreover,
CQU-906 also provides a physical WPS button. When connecting to a WPS support
access point, you can just press the button and supplely set up the security.
It combines Station (LAN Adapter) and Access Point in one, allowing the host PC/ Notebook to
easily connect other Wi-Fi devices around, such as laptops, PDAs, and Wi-Fi phones to the internet
without complication of wires.
1.2. Main Features
The following lists the main features of the Wireless-N High Power USB adapter.
Super mini size and low power consumption design.
Complies with IEEE 802.11n and backward compatible with IEEE 802.11b/g
Data transition of up to 150Mbps data rate
WMM (802.11e) function improves the quality of VoIP and video service
2 Application Modes: Station (LAN Adapter) and Access Point. Easy Mode changing by
running Utility
High security level, supports major encryption methods like WEP, WPA, and WPA2 encryption
Supports one touch encryption method (WPS) to simplify the secure establishment of a
wireless network
1.3. Getting to Know CQU-906
This section describes the WPS button and LED indicator of the Wireless-N USB adapter.
LED State Description
LINK / ACT
On
(Stable) Wireless USB dongle is powered on.
Off Wireless USB dongle is powered off.
Blinking
Fast WPS mode enabled.
Blinking
Slow Data is transmitting or receiving.
4
Chapter 2. Installing the Software of the USB adapter
Notes: Driver installation process of Windows 2000/2003/Vista/7 is similar to Windows XP
Before installing your Wireless-N USB adapter, insert the Auto-Install CD into your CD-ROM drive.
Unless you have disabled the auto-run feature of Windows, the AutoPlay Menu should appear
automatically. If not, you can manually access the installation by clicking the Start button and
choosing Run. In the drop-down box type D:\ AUTORUN.EXE (where D: is the drive letter for your
CD-ROM drive).
Alternatively, double-click My Computer and double-click on the CD-ROM drive icon.
1. Click on Driver to install driver for your Wireless-N USB adapter.
5
2. Please click “Next”.
3. Click “Install” to start the setup program or click “Cancel” to abort the installation process.
6
4. Please wait for few minutes when running installation
5. Restart your computer to make the installation completed. Select “Yes, I want to restart my
computer now” or select “No, I will restart my computer later” if you plan to restart later.
And then, click “Finish”
7
Chapter 3. Configuring Your Wireless Network
1. Double click on the green wireless signal icon in your taskbar or the shortcut
icon on the desktop.
2. Configuration utility will scan for all wireless access points automatically. You can use the utility
to check the linking information or go to the “Available Network” page to search for available
wireless network
8
3. Go to the “Available Network” page, and click “Refresh” if your preferred wireless access point
is not shown here. After the Scan results displayed, select the wireless access point with the
SSID (the name of wireless access point) you want to connect and click “Add to Profile”
9
4. The wireless Network Properties window will pop up. If the access point you selected enables
encryption (WEP, WPA, WPA2, and etc…), please setup the wireless securities settings. If not,
simply click the “OK” to and skip to step 6
10
5. The wireless securities setting should be the same as the connected access point. You should
check the encryption details of your connected access point before setting this setup.
WEP Encryption
Select the appropriate level of WEP encryption, 64-Bit or 128-Bit and enter the WEP key
WPA-PSK or WPA2-PSK Encryption
Select WPA-PSK or WPA2-PSK according to your connected access point. Enter the key
in the “Network Key” and type again in the “Confirmed network key” to double confirm.
802.1x wireless configure
If the connected access point enable the 802.1x wireless authentication
Please fill in the required information, then click “OK” to finish the setting and back to
“General” page
Altri manuali per CQU-906
1
Indice
Altri manuali CNET Hardware per computer
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
